I'll walk you through the whole installation Replies answered quickly
Жүктеу.....
Пікірлер: 62
@Dudeness803 жыл бұрын
I almost never leave replies, but this video is the reason that I was able to install this fan yesterday. The instructions that came with the fan were poorly written without much detail. Thanks a lot for this. I was wondering why the damper wouldn't move like I thought it should and never even saw the tape until I saw this video and went looking for it. I was completely lost on the electrical stuff that the included instructions breezed over and taking the fan apart made assembly easier.
@ederaldovieira1560
5 ай бұрын
Same here!😁🤣🤣🤣
@charlesgates4387 Жыл бұрын
Thanks for the instruction...your video not only let me know I could do this ( albeit within 80 CFM fan) but it was also my exact wiring situation. Now I don't have to cut a hole for a new switch, run new wiring, call the electrician, bang my head against the wall. You rock.
@tupelounclefan3 жыл бұрын
Jon. THANK YOU. I installed one 7 months ago. It was horrendous. Your video made it so much easier. I'd advise anyone who is replacing to video their wiring before undoing.
@tupelounclefan
3 жыл бұрын
I installed a second one today.
@emdv20465 ай бұрын
Thank you so much for posting this! Makes it a lot less scary
@LibraryShortcakeSampson2 жыл бұрын
Thank you- I would never have have managed to install this myself without this!
@ederaldovieira15605 ай бұрын
Thank you- I would never have have managed to install this myself without this!🤛👏👍
@charleschi8432 жыл бұрын
Thank you so much. I only have a masters degree so this install was a struggle.
@bradfoster82923 жыл бұрын
Thank you so much! Your instructions were so much more helpful and I managed not to electrocute myself. Either most of these manuals are useless, or they expect someone to have done it before (or be an electrician?!?).
@piseysamoeurn1233 жыл бұрын
That’s what I was looking for. Save me a lot of time. Thank you
@APortaA14 жыл бұрын
Very Clear explanation, thank you John!
@ST-zg9qk4 жыл бұрын
Thanks so much for the video! It was extremely helpful! I bought the same vent fan but the cutout in the ceiling is too big! This vent fan is smaller than the old one I had. The cutout in my ceiling is about 9x9 inches and the housing on this vent fan is about 8x8. Any advice on how I can fix that to make it work? Thanks in advance!
@srikaiyer13312 жыл бұрын
Installed it today, thank you. It was very helpful.
@mariaroe99574 жыл бұрын
Thanks for uploading this I’m doing this today
@gkidwell9868
3 жыл бұрын
Thanks so much for your post. It really helped me with the wiring part.
@stevenocchionero52622 жыл бұрын
your veido is Fantastic you do a great job and I like your style and sense of humor thank you
@Renatousa172 ай бұрын
Thank you for the video it helped me a lot.👍👍
@kd-bc1lz2 жыл бұрын
The hands of a Workin' Man.
@charleschi8432 жыл бұрын
16:13 When I knew you were trust worthy. A man missing a digit is my kind of guy.
@tylervonengelbrechten52382 жыл бұрын
what about vapor barrier or one of those vapor boxes for the fan ? are those needed
@joycehoffman1823 жыл бұрын
My husband said thank you thank you thank you!
@herveflotacuesy82772 жыл бұрын
Excelente me sirvió bastante y explica a detalle la instalación 👍🏻
@smod19942 жыл бұрын
Awesome video brother! Thank you!
@espinozanovak83110 ай бұрын
Take those bulging screws out and make some pilot holes on the inside of the box sides. Then screw sideways horizontally from inside the box through the metal to your framing.
@Jonehughes
10 ай бұрын
Yeah.... if I cared, I would do that... but I don't....😜
@THEJMILLSBAND3 жыл бұрын
Thanks for posting ......
@anitad310 Жыл бұрын
I have a quick question how do I change the light brightness I have the same one
@nicoleroberts6787
Жыл бұрын
Did you figure this out, my dear? I'd like to know.
@bevolonghorns2 жыл бұрын
Very helpful video in understanding how to install this garbage. I would suggest not taking the motor out as the flimsy casing gets out of shape when trying to set it in the hole. After...the holes don't line up for reinstalling.
@sierranow14 жыл бұрын
I just bought this today but the cutout got my drywall is to big to drill it in what can I do to fix that?
@Jonehughes
4 жыл бұрын
I would love to help you But I cannot figure out what you are trying to say Could you rephrase your question
@ClaytonBigsby54523 жыл бұрын
Who is your favorite movie director/writer 😉. In all seriousness thanks for the video
@edwinretamar28473 жыл бұрын
Good stuff
@karolinagiller68213 жыл бұрын
Hi Jon! I do have questions about wiring- we did what you did but now circuit is breaking... Any idea why?
@Jonehughes
3 жыл бұрын
Text me at 541-660-7805 It's too hard to talk over KZread replies
@maxhl7
2 жыл бұрын
Same here
@kooldrae
Жыл бұрын
@@Jonehughes for some reason my light blew out but my fan works fine.
@loucor572 жыл бұрын
Hi Jon, after having it for some time, do you recommend this fan?
@Jonehughes
2 жыл бұрын
Absolutely love this thing super bright and the fan works fantastic
@genesislandscape2 жыл бұрын
Any Ways 👍
@danielrivas689 Жыл бұрын
What if you don’t have a ground? Any alternatives? My house is old. 1954 old conduit/insulation.
@Jonehughes
Жыл бұрын
You can always make a ground just has to be grounded find something that can be grounded Like your water lines and throw a line on it and a copper wire or a green wire up to it and from it
@danielrivas689
Жыл бұрын
@@Jonehughes GFCI switch? 😀
@tylervonengelbrechten52382 жыл бұрын
what about vapor barrier, is that required for the fan being as it’s being installed in the attic
@Jonehughes
2 жыл бұрын
no
@tylervonengelbrechten5238
2 жыл бұрын
@@Jonehughes why isn’t it required ? i thought cods specified it is required
@Jonehughes
2 жыл бұрын
In a fully enveloped system whatever loss of vapor barrier you get by installing this vent is made up by the fact that it is metal and also that is an exhaust product
@pannashah76622 жыл бұрын
How you put white trim notch
@Jonehughes
2 жыл бұрын
25:24 in the video Shows the only Notch and the way that the trim should go
@popseeco13 жыл бұрын
How do you Disable the humidity sensor?! Way to sensitive…
@Jonehughes
3 жыл бұрын
Don't it's not too sensitive it's trying to get the humidity out you don't want mold
@beckyleung72332 жыл бұрын
good
@DR-um2bv5 ай бұрын
Was the fan on also or just the light ????
@Jonehughes
5 ай бұрын
I'm not sure what you're asking ?🤷
@jeffreyport109916 күн бұрын
Help? Fan runs Backwards and blows the heat/cold from outside to inside my bathroom. I had the same vent fan light combo wired into my bathroom to replace the old single bulb. It is wired into the light switch, so when you turn on the light switch, light and fan come on at same time. Hope someone can help.
@Jonehughes
16 күн бұрын
Hi Jeffrey Since those fan motors cannot run backwards The only thing I can suggest is you have an obstruction Double check that the flapper opens all the way open and if not an obstruction there and then in the pipe there's no obstruction in the pipe either because something is pushing the air back and it's not the fan
@Jonehughes
16 күн бұрын
Check the video at 5 minutes and 45 seconds and watch the flapper move
@Jonehughes
16 күн бұрын
Let us know if it works
@jeffreyport1099
16 күн бұрын
@@Jonehughes I went to bathroom with a ladder to check on the inside, but it is too high for me to get to it and check for obstructions, the outside, where the vent comes out is too far for me to see if it is blocked. It is about 11 feet high from ground level. I will see if I can get someone younger and able to walk and climb better than me. I appreciate the advice and help. ty
@VERONICARIVERA-qo4rd Жыл бұрын
Donald Trump is that you? Hehehehe
@malaika4960
10 ай бұрын
OMG, as soon as you said this. I heard the similarity in the voice 😂😂😂
Пікірлер: 62
I almost never leave replies, but this video is the reason that I was able to install this fan yesterday. The instructions that came with the fan were poorly written without much detail. Thanks a lot for this. I was wondering why the damper wouldn't move like I thought it should and never even saw the tape until I saw this video and went looking for it. I was completely lost on the electrical stuff that the included instructions breezed over and taking the fan apart made assembly easier.
@ederaldovieira1560
5 ай бұрын
Same here!😁🤣🤣🤣
Thanks for the instruction...your video not only let me know I could do this ( albeit within 80 CFM fan) but it was also my exact wiring situation. Now I don't have to cut a hole for a new switch, run new wiring, call the electrician, bang my head against the wall. You rock.
Jon. THANK YOU. I installed one 7 months ago. It was horrendous. Your video made it so much easier. I'd advise anyone who is replacing to video their wiring before undoing.
@tupelounclefan
3 жыл бұрын
I installed a second one today.
Thank you so much for posting this! Makes it a lot less scary
Thank you- I would never have have managed to install this myself without this!
Thank you- I would never have have managed to install this myself without this!🤛👏👍
Thank you so much. I only have a masters degree so this install was a struggle.
Thank you so much! Your instructions were so much more helpful and I managed not to electrocute myself. Either most of these manuals are useless, or they expect someone to have done it before (or be an electrician?!?).
That’s what I was looking for. Save me a lot of time. Thank you
Very Clear explanation, thank you John!
Thanks so much for the video! It was extremely helpful! I bought the same vent fan but the cutout in the ceiling is too big! This vent fan is smaller than the old one I had. The cutout in my ceiling is about 9x9 inches and the housing on this vent fan is about 8x8. Any advice on how I can fix that to make it work? Thanks in advance!
Installed it today, thank you. It was very helpful.
Thanks for uploading this I’m doing this today
@gkidwell9868
3 жыл бұрын
Thanks so much for your post. It really helped me with the wiring part.
your veido is Fantastic you do a great job and I like your style and sense of humor thank you
Thank you for the video it helped me a lot.👍👍
The hands of a Workin' Man.
16:13 When I knew you were trust worthy. A man missing a digit is my kind of guy.
what about vapor barrier or one of those vapor boxes for the fan ? are those needed
My husband said thank you thank you thank you!
Excelente me sirvió bastante y explica a detalle la instalación 👍🏻
Awesome video brother! Thank you!
Take those bulging screws out and make some pilot holes on the inside of the box sides. Then screw sideways horizontally from inside the box through the metal to your framing.
@Jonehughes
10 ай бұрын
Yeah.... if I cared, I would do that... but I don't....😜
Thanks for posting ......
I have a quick question how do I change the light brightness I have the same one
@nicoleroberts6787
Жыл бұрын
Did you figure this out, my dear? I'd like to know.
Very helpful video in understanding how to install this garbage. I would suggest not taking the motor out as the flimsy casing gets out of shape when trying to set it in the hole. After...the holes don't line up for reinstalling.
I just bought this today but the cutout got my drywall is to big to drill it in what can I do to fix that?
@Jonehughes
4 жыл бұрын
I would love to help you But I cannot figure out what you are trying to say Could you rephrase your question
Who is your favorite movie director/writer 😉. In all seriousness thanks for the video
Good stuff
Hi Jon! I do have questions about wiring- we did what you did but now circuit is breaking... Any idea why?
@Jonehughes
3 жыл бұрын
Text me at 541-660-7805 It's too hard to talk over KZread replies
@maxhl7
2 жыл бұрын
Same here
@kooldrae
Жыл бұрын
@@Jonehughes for some reason my light blew out but my fan works fine.
Hi Jon, after having it for some time, do you recommend this fan?
@Jonehughes
2 жыл бұрын
Absolutely love this thing super bright and the fan works fantastic
Any Ways 👍
What if you don’t have a ground? Any alternatives? My house is old. 1954 old conduit/insulation.
@Jonehughes
Жыл бұрын
You can always make a ground just has to be grounded find something that can be grounded Like your water lines and throw a line on it and a copper wire or a green wire up to it and from it
@danielrivas689
Жыл бұрын
@@Jonehughes GFCI switch? 😀
what about vapor barrier, is that required for the fan being as it’s being installed in the attic
@Jonehughes
2 жыл бұрын
no
@tylervonengelbrechten5238
2 жыл бұрын
@@Jonehughes why isn’t it required ? i thought cods specified it is required
@Jonehughes
2 жыл бұрын
In a fully enveloped system whatever loss of vapor barrier you get by installing this vent is made up by the fact that it is metal and also that is an exhaust product
How you put white trim notch
@Jonehughes
2 жыл бұрын
25:24 in the video Shows the only Notch and the way that the trim should go
How do you Disable the humidity sensor?! Way to sensitive…
@Jonehughes
3 жыл бұрын
Don't it's not too sensitive it's trying to get the humidity out you don't want mold
good
Was the fan on also or just the light ????
@Jonehughes
5 ай бұрын
I'm not sure what you're asking ?🤷
Help? Fan runs Backwards and blows the heat/cold from outside to inside my bathroom. I had the same vent fan light combo wired into my bathroom to replace the old single bulb. It is wired into the light switch, so when you turn on the light switch, light and fan come on at same time. Hope someone can help.
@Jonehughes
16 күн бұрын
Hi Jeffrey Since those fan motors cannot run backwards The only thing I can suggest is you have an obstruction Double check that the flapper opens all the way open and if not an obstruction there and then in the pipe there's no obstruction in the pipe either because something is pushing the air back and it's not the fan
@Jonehughes
16 күн бұрын
Check the video at 5 minutes and 45 seconds and watch the flapper move
@Jonehughes
16 күн бұрын
Let us know if it works
@jeffreyport1099
16 күн бұрын
@@Jonehughes I went to bathroom with a ladder to check on the inside, but it is too high for me to get to it and check for obstructions, the outside, where the vent comes out is too far for me to see if it is blocked. It is about 11 feet high from ground level. I will see if I can get someone younger and able to walk and climb better than me. I appreciate the advice and help. ty
Donald Trump is that you? Hehehehe
@malaika4960
10 ай бұрын
OMG, as soon as you said this. I heard the similarity in the voice 😂😂😂