That surface finish never gets old on these big parts.
@JadsonziinhO Жыл бұрын
Chris you are very skilled with the manual guide, could you show videos of you doing the programming as well? I always follow your videos and I'm from Brazil, I work with the same command as you on the cnc lathe and I rarely use the guide, I'm still a layman, A hug! 🇧🇷🇧🇷
@aurelianmunteanu7680 Жыл бұрын
Im amazed how many times you need to turn the part and indicate it ..great work.
@rolandolievanoagudelo.5112 Жыл бұрын
Muy buen trabajo maestro 👍 magnífico
@jimp.4531 Жыл бұрын
Great job, Chris.
@TrPrecisionMachining Жыл бұрын
Very good video Chris Maj
@diopmoumine1887 Жыл бұрын
Vraiment tu fais du bon boulot
@johnlawler1626 Жыл бұрын
Nice bit of heavy tuning mate 👍 thanks for sharing 👍
@CncFrezar Жыл бұрын
Bardzo fajna robota
@lorna6773 Жыл бұрын
Our company also has such a CNC lathe pin process, but this process works in automatic mode, and we process the parts above the vane pump
I would have torn that part up using a vertical lathe. The metal removal rates on a vertical lathe are really something to see.
@entgaming7930 Жыл бұрын
I am big fan boro
@swanvalleymachineshop Жыл бұрын
Nice one . 👍
@shawnhuk Жыл бұрын
Also, I wouldn’t mind if you posted the rpm’s for certain stages
@ChrisMaj
Жыл бұрын
I play around with the rpm as I go.
@juliusmilo5959 Жыл бұрын
Good job...
@entgaming7930 Жыл бұрын
I am satisfying your working
@za3terbouncho648 Жыл бұрын
very wonderful . thank you
@marcochiavarini2825 Жыл бұрын
Chapeau
@alessandropezzella4121 Жыл бұрын
❤
@Tokar_metal_stanok Жыл бұрын
👌✊👍
@diopmoumine1887 Жыл бұрын
Très belle surface
@aniveshchaturvedi9886 Жыл бұрын
please show when you revert the job or in between processes. thanks
@wahrheitrecht3239 Жыл бұрын
💯💯💯💯💯💯👍👍👍👍👍👍
@christianfeldmann8287 Жыл бұрын
I mein that Black one insert
@ronaldfairhurst2914 Жыл бұрын
what tolerance range was on a part like this, I hate measuring large diameter bores with an inside mic if the tolerance is less than a .001 + or _
@ChrisMaj
Жыл бұрын
Within 0.002"
@ShainAndrews Жыл бұрын
I'm pretty sure a guy can order one of those from McMaster-Carr. LOL
@ChrisMaj
Жыл бұрын
They don't make them that big, it's a special order.
@jimsvideos7201 Жыл бұрын
Some napkin ring 😅
@ikbendusan Жыл бұрын
what is that black build-up that appears on the insert?
@ChrisMaj
Жыл бұрын
Just from the heat.
@shawnhuk Жыл бұрын
With a ring that big, why still use the smaller chuck?
@ahugo765
Жыл бұрын
Probably because he wanted to use the self centering capability of the 3 jaw chuck when clamping on the ID of the part.
@raghavsharma1977 Жыл бұрын
What is the total machining time for this job ?
@ChrisMaj
Жыл бұрын
About 3 hours.
@Jasondr13 Жыл бұрын
Hi im Jason just a question, do you have alot of experience on forged parts because we recently do alot of stainless steel forged parts and have alot of interupted cuts to do, do you have any tips, like what kind of cutting tools are better for it ?
@ChrisMaj
Жыл бұрын
I hardly ever do any ss, so I can't really be any help to you. Sorry
@Jasondr13
Жыл бұрын
@@ChrisMaj no problem man thanks for answering tho 👍
@danthoreson4062 Жыл бұрын
Awesome job. that print wasn't fun to look at
@jutto64 Жыл бұрын
D2 Metal?
@christianfeldmann8287 Жыл бұрын
What Brand is the insert?
@ChrisMaj
Жыл бұрын
Kennametal and Korloy
@entgaming7930 Жыл бұрын
Heye bro how r you
@SunilKumarSunilKumar-eg6mm Жыл бұрын
Sir please cnc model kya h
@ChrisMaj
Жыл бұрын
Hankook PROTEC-9NC
@user-ex8np5xm2e Жыл бұрын
09:25. А ОЖ, религия не позволяет? Или так и надо, чтобы резец горел?
Пікірлер: 50
That surface finish never gets old on these big parts.
Chris you are very skilled with the manual guide, could you show videos of you doing the programming as well? I always follow your videos and I'm from Brazil, I work with the same command as you on the cnc lathe and I rarely use the guide, I'm still a layman, A hug! 🇧🇷🇧🇷
Im amazed how many times you need to turn the part and indicate it ..great work.
Muy buen trabajo maestro 👍 magnífico
Great job, Chris.
Very good video Chris Maj
Vraiment tu fais du bon boulot
Nice bit of heavy tuning mate 👍 thanks for sharing 👍
Bardzo fajna robota
Our company also has such a CNC lathe pin process, but this process works in automatic mode, and we process the parts above the vane pump
Thanks for sharing 👍
Thanks for sharing, cheers
これはSCM440の鍛造品ですか? 私も多くの車輪や歯車の加工を行いました。 その多くが製鉄所で使用されています。 いつ見ても確かな精度で加工されていて素晴らしいです。
I would have torn that part up using a vertical lathe. The metal removal rates on a vertical lathe are really something to see.
I am big fan boro
Nice one . 👍
Also, I wouldn’t mind if you posted the rpm’s for certain stages
@ChrisMaj
Жыл бұрын
I play around with the rpm as I go.
Good job...
I am satisfying your working
very wonderful . thank you
Chapeau
❤
👌✊👍
Très belle surface
please show when you revert the job or in between processes. thanks
💯💯💯💯💯💯👍👍👍👍👍👍
I mein that Black one insert
what tolerance range was on a part like this, I hate measuring large diameter bores with an inside mic if the tolerance is less than a .001 + or _
@ChrisMaj
Жыл бұрын
Within 0.002"
I'm pretty sure a guy can order one of those from McMaster-Carr. LOL
@ChrisMaj
Жыл бұрын
They don't make them that big, it's a special order.
Some napkin ring 😅
what is that black build-up that appears on the insert?
@ChrisMaj
Жыл бұрын
Just from the heat.
With a ring that big, why still use the smaller chuck?
@ahugo765
Жыл бұрын
Probably because he wanted to use the self centering capability of the 3 jaw chuck when clamping on the ID of the part.
What is the total machining time for this job ?
@ChrisMaj
Жыл бұрын
About 3 hours.
Hi im Jason just a question, do you have alot of experience on forged parts because we recently do alot of stainless steel forged parts and have alot of interupted cuts to do, do you have any tips, like what kind of cutting tools are better for it ?
@ChrisMaj
Жыл бұрын
I hardly ever do any ss, so I can't really be any help to you. Sorry
@Jasondr13
Жыл бұрын
@@ChrisMaj no problem man thanks for answering tho 👍
Awesome job. that print wasn't fun to look at
D2 Metal?
What Brand is the insert?
@ChrisMaj
Жыл бұрын
Kennametal and Korloy
Heye bro how r you
Sir please cnc model kya h
@ChrisMaj
Жыл бұрын
Hankook PROTEC-9NC
09:25. А ОЖ, религия не позволяет? Или так и надо, чтобы резец горел?