There is just something about a random person on the internet fixing up old nostalgia things that makes you feel calm and collected after a tough week.

@zapataboy9377

2 жыл бұрын

Same, also the fact that i could have never bought these items when i was a kid (and now they are old and obsolate) gives it a different vibe

@nekosanestacado8661

2 жыл бұрын

Dude your name is literally max Payne get lost scrub

@BeinZilex

2 жыл бұрын

@@nekosanestacado8661 who the fuck is nekosan estacado

@resEG

2 жыл бұрын

Many many thanks

@unoreu

2 жыл бұрын

@@nekosanestacado8661 look at your name and think twice

I remember doing this heat gun and thermal paste repair job on my PS3 by following a youtube guide back in around 2008. It was something that felt way beyond my capabilities but I had nothing to lose attempting it. I was so damn proud of myself when the PS3 fired as normal. I was always worried about having it running for too long after that, but it kept me going until I got the slim version. The slim eventually developed issues too, usually disc drive related. The PS3 gen had terrible reliability problems.

@windowstips1430

Жыл бұрын

My ultra slim has been alright

@fascistalien

Жыл бұрын

​@@windowstips1430the ultra slim is the best version by far, cause the simplicity of the hardware.

@windowstips1430

Жыл бұрын

@@fascistalien ya

@JawsFan27

Жыл бұрын

I guess I was lucky since my PS3 never had issues. Even after a decade, it never acted up.

@honza9929

11 ай бұрын

yea im trying to fix mine cuz of the yellow ring of death

I just got a launch PS3 for $30. Aside from the disc drive needing replacing, it works perfectly fine, which for a console from November of 2006 is incredible.

@---777---

Жыл бұрын

Not for a long time, gpu will fail eventually.

@FG-td4vs

Жыл бұрын

@@---777--- Not if you replace the thermal paste and stuff. Should be fine

First time I’m catching one of these. I’m new here from the candy machine and went down the retrobrighting hole with your videos (as well as some other restorations). Just wanted to say thanks so much for making these high quality, relaxing and informative videos :)

Restoration eg your like one of the few actual legitimate restoration channels nice job

Great video, very nice to watch, however as I'm sure many have told you in comments already - this isn't going to solve the issue. The CPU and GPU are not at fault here, the issue has been mistaken to be the solder balls cracking or overheating for many years, but only a few years ago we discovered the real cause of the issue. The actual culprit was the low profile NEC Tokien capacitors, which are the pairs of black rectangles you see a pair of next to the CPU and GPU on either side. The problem is they slowly stop working over time, causing the YLOD. The reason we never discovered these were causing the fault was because applying heat to the CPU / GPU as you do in this video also heats up the NEC caps, which temporarily makes them work again from the heat - this caused people to misdiagnose the CPU/GPU to be at fault. The real fix is actually relatively easy. :) You heat up or scrape away at one or two of the NEC capacitors to remove them. Personally I recommend using a small knife and a soldering iron to destroy and melt away the capacitors, instead of using a heat gun to desolder them, since there is many tiny capacitors and components located nearby them. Once removed, scratxh away at the board below to reveal the copper, since there is a large grounding plane around them, and then replacing each NEC cap with 4 tantalum capacitors at 470uf (iirc), soldered to the positive the capacitor used, and the revealed grounding plane. After replacing one or all of the NEC caps with 4 tantalum caps, the PS3 will reliably work again :) The best part is that this is a lasting fix, it won't stop working after 10 years or anything

@gtturbo6156

2 жыл бұрын

T aurait une photo à nous montrer du remplacement des condensateur que tu parle. Sa m intéressé de réparer la mienne de façon sur.

@janekverhulst8693

2 жыл бұрын

No it depends per every console we can diagnose it by how long does it take to get the light. Heres a vid explaining it kzread.info/dash/bejne/h4ymsrBrnajYmbA.html

@warmaster336

2 жыл бұрын

These systems are so old when you take them apart the thermal paste is always dried up causing cpu gpu to overheat causing solder balls to crack underneath causing ylod sometimes I could be the nec tokin if you reflow the cpu gpu remove the heat spreaders put mx4 your console will be so quiet you will barely hear it

@georgigeorgiev349

2 жыл бұрын

The Thermal Paste is the fault on some consoles like Xbox 360

@warmaster336

2 жыл бұрын

@@BeinZilex replaced maybe but a reflow does the trick

Awesome job with the fix. Excellent video.😎

Another top-notch repair of a video game console. Most excellent. 👍

Amo esse console parabéns pelo vídeo e sucesso ao seu canal❤

Your videos are so relaxing and satisfying u.u

Using heat isn’t going to bring it back to life fully. It may be temporary but there’s no telling how long it could last. But most likely that issue is going to happen again. There is a diagnostic tool that you could purchase and it reads the syscon chip on the motherboard. Then it gives you error codes and that will tell you the issue. But considering this is a G01 and the temps get very high on this model I’d say that it’s probably the GPU solder bumps since the underfill was ment for lower temps but the PS3 worked the gpu like no tomorrow. The issue was eventually fixed in late 2008 with a higher temperature underfill. The underfill issue caused the solder bumps to crack under thermal stress so it might need a new gpu but it wouldn’t be worth it on this type of model Edit: also when you didn’t fix the thermal pad it made me die inside

@deathtrap1976

2 жыл бұрын

I've also heard that the NEC TOKIN chips near CPU and GPU might be responsible for the system's malfunction.

@Kurumisama

2 жыл бұрын

The fact he didn't removed the HDD before anything else, that right there I lost any hope

@Cristian121212100

2 жыл бұрын

YLOD is usually caused by the nictoken capacitors, usually heat brings them back to life but not for long, like you said, there are replacements that are better than the nictokens

@w0lf4llo84

2 жыл бұрын

@@Cristian121212100 not for these older models. Yes they are the same exact caps between all the phats but the model that are the K01 and below have a bad underfill on the GPU ment for lower temperatures. The early phats usually get very hot too. The RSX usually fails because the solder bumps between the die and the substrate crack due to thermal stress. So yes it could still be the Nec Tokins but there’s no real way of telling unless they do a diagnostic test

@07wrxtr1

2 жыл бұрын

Bingo! I sent mine to some gorilla mod place in MN; bought me about 6 months of use then that was it; bought a slim and was happy with it until the pos plastic casing would have some random rattling noise depending upon fan speeds… so after that I said F this, n built my first gaming pc n never looked back!

I fixed my PS3 because of your instructions. Thank you Resto! Much love from Indiana.

@starkiller7057

Ай бұрын

How long did it go!?

There’s also thermal paste under the IHS plates (the big metal plates that the thermal paste was on) it’s difficult to remove but replacing that paste would also exponentially help in keeping it even cooler too

@w0lf4llo84

2 жыл бұрын

I remember trying this on my PS3 and it made the temps higher because I think I bent the IHS lmao

@resEG

2 жыл бұрын

I really agree with you, thanks for watching❤️

@resEG

2 жыл бұрын

thanks for watching❤️

@TKdoh

2 жыл бұрын

It does more harm than good, not worth the effort. See a lot of people do it to these but it’s really not necessary.

@w0lf4llo84

2 жыл бұрын

@@TKdoh on some older models it is. The gpu is actually pretty easy to do. Just take a flat head and pry up after you use a heat gun on it

Very satisfying watch. Always great when you see these old classic consoles brought back to life. Well done sir.

@notthatdigusted7468

2 жыл бұрын

I'm surprised this system is thought of like that an old console to me is a colecovision, Magnavox Odyssey, Atari 2600, 1970s Pong 5 System, Intellivision, RCA Studio I and II, etc.

@beezle_dubz

Жыл бұрын

I wouldn't say PS3 is a classic quite yet, but it's definitely getting there.

I remember back in 2009 having the YLOD and then Sony not apologising for their poor design for this console overheating. Bringing back nightmares but also nostalgia fixing it up with my dad 😆 needless to say i flogged it on ebay as spare parts and used the money to buy a slim line which i still have to this day! 🥳

@powerpc64

Жыл бұрын

the ylod is caused by several other things, not just overheating

@blvcksymbiote

5 ай бұрын

yo m*mma gets animated at night

Wow, I can't believe I watched the whole thing and was extremely satisfied

you're the boss! Amazing video as always man! 😎😎😎

@resEG

2 жыл бұрын

You're the best!, Glad you enjoyed it! ❤️

💕💕fantastic relaxation❤ ASMR

@resEG

2 жыл бұрын

Glad you liked it!!

This has motivated me to pull out my old first gen PS3 Fat to get her back working

Awesome job, friend! Congrats!

Great job, I enjoyed it very much. I think I could take this apart but I could NEVER reassemble it. You may want to consider investing in a small air compressor and a small vacuum to blow out and suck up dust and dirt. It would make things so much easier for you. Thanks for the video!

Vídeo muito satisfatório, é muito legal ver o aparelho funcionando normalmente

@Arink22

4 ай бұрын

Xander?

丁寧でわかりやすい！

It was very interesting to watch you! You are like a teacher! thanks!

@resEG

2 жыл бұрын

Glad you enjoyed it! thanks for watching❤️

Really like the chanal. Has made me want to restore my old consoles for myself.

@resEG

2 жыл бұрын

Glad you enjoyed it! ❤️

Just a little word of advice, if you're ever to clean one of these again, I would suggest using a microfiber towel instead of a paintbrush on the top cover. The paintbrush has a high chance of creating normal scratches and micro scratches on the glossy plastic.

@lyasu69

Жыл бұрын

Agreed, that's exactly what I observed he makes mistake on cleaning it this way especially the plastic

@drewskii2082

Жыл бұрын

Is it silly for me to say that those scratches can be restored? Like wasn’t there some spray and stuff you could buy back then to restore cd scratches?

@keystoneranger7100

Жыл бұрын

Even if you do try to "fix" the scratches after they are there, they will never truly go away, you will just repolish the already scratched finished which most times will actually make it more visible. Your not wrong though, sometimes that can work but its not guaranteed.

@marcokemper6349

9 ай бұрын

This brush seems to be super soft

Great job on the fix.

That is a fantastic transformation!!

@resEG

2 жыл бұрын

Many many thanks

This technique is common, but YLOD recurs quickly. I also got several PS3s from discarded items at a hotel run by an acquaintance, so I repaired them many times, but in the end YLOD recurred. After all, once YLOD occurs, the PS3's CPU and GPU contact surface tear is not easily cured.

Todavía uso mi PS3 fat 80 gigas retrocompatible y ya en marzo cumple sus 15 años. Maravillosa consola! Greetings from Mexico City!

@resEG

2 жыл бұрын

¡Me alegra que lo hayas disfrutado! ❤️

@rol_rob2603

Жыл бұрын

Nunca se te dañó?

@capitanprincejuanteruelfurio

Жыл бұрын

la PS3 solo es retrocompatible la de 60gigas la de 40 80 y 160 gigas no eran retrocompatible

@capitanprincejuanteruelfurio

Жыл бұрын

lavar la tapa no soluciona la luz amarilla para reparar la

@Frandash9

Жыл бұрын

La de 80GB es semi retrocompatible (compatibilidad limitada con juegos de PS2). El 75% de los juegos funcionan bien. Los demás sufren caídas de framerate, alentamientos, errores gráficos o cuelgues aleatorios. Las únicas 100% retrocompatibles son las de 20 y 60gb hechos en USA y Japón por tener el procesador del PS2 integrado (Emotion Engine)

Man I wish I was smart and able to fix tech like this dude

I heared there was drama with a refurb seller in canada not even opening up their devices. so I wanted to know what comes with refurbishing. so many great channels that do amazing work

Valeu pela aula... Parabéns pelo bom trabalho...

@resEG

2 жыл бұрын

Muitíssimo obrigado

@marcio3960

2 жыл бұрын

@@resEG eu que agradeço. Bom dia...

@TGSOnly

2 жыл бұрын

Obrigada pelo video, e pela descrição em português BR! Show de bola o canal!

Excelente vídeo. Saludos y bendiciones desde Colombia 👌🏻👍🏻

@resEG

2 жыл бұрын

¡Me alegra que lo hayas disfrutado! ❤️

This video recalls my memory of my old fat white ps3. It died of the same reason - triple "dood". I still keep it and I really hope I can send it to you for repair. Its just like it happened yesterday. 😢😢😢

This reminds me of my childhood PS3. After years of love, it suffered the same fate (although instead of refusing to come on, it would just die randomly when in use. You can imagine the frustration). We knew how to fix it but didn't have the means to (and my dad doesn't feel comfortable with soldering anymore since his eyesight is bad at times), so whenever it got so bad we couldn't stand it, my dad and I would take it apart and put the motherboard in the oven. Not the most glamorous fix, but it worked for a while and we got some extra time out of it. We still have it somewhere and I've always hoped I'd be able to have the means to fix it c:

Ótimo vídeo ❤❤

@resEG

2 жыл бұрын

Que bom que você gostou! ❤️

Que video lindo e satisfatório amigo, parabéns! Farei o mesmo no meu ps3 aqui em breve ! Obrigado

I go way back with assassins creed 3 Fire video

That is such an awesome little screwdriver set. I have one too.

Big mistake ... There is also a paste under the RSX plate that needs to be replaced .... That's why the ps3 gets hot ..... You have to cut the plate and replace the paste there, it is the main cause of overheating

@user-ph2hb6rc8l

Жыл бұрын

yes

I did this twice to my 60gb PS3 years ago (reflowed). It's a temp fix, it won't last. The NEC Tokin capacitors are the main culprits. They need to be replaced for better quality, tantalum capacitors. Paste under the IHS also needs replaced. Both not an easy task. That's why my ps3 currently sits in a cupboard lol.

@resEG

2 жыл бұрын

¡Me alegra que lo hayas disfrutado! ❤️

@jeffescortlx

2 жыл бұрын

This. Reflowing should not be recommended as the first step anymore this is been proven a few years back. Reflowing doesn't "fix" them the majority of the time. It just temporarily rejuvenates the NEC capacitors. The real permanent fix is to just replace the capacitors and not to reflow the chips unless absolutely necessary.

@cheeryos116

2 жыл бұрын

@@jeffescortlx ya try telling that to the people who think it's a cracked solder joint that needs reflowed 😂 they're gonna die on that hill. they think that since reflowing it "works" that it must be one of the bga joints and couldn't possibly be anything else. I've got an A01 delidded with LM applied to the dies and am waiting til I need to replace a cap to replace a cap.

@jeffescortlx

2 жыл бұрын

@@cheeryos116 your not kidding. In my own video I have people commenting that it's only failed caps like 2% of the time and that it's a myth that the NEC's fail commonly. In a video where I literally only replace the Caps without a reflow and it fixed YLOD.

@Scott-M1

2 жыл бұрын

@@jeffescortlx Yep, it's 100% the NEC's. Toshiba laptops failed because of them as well.

Thank you so much. My PS3 hasn’t been running in about two years thank you so much. I am 14 years old and to me this is simple but I’ve been taken computer science for two years just to do this.

You Repaired a lot of PlayStations! Awesome Work!

@resEG

2 жыл бұрын

Yes, thanks, Glad you enjoyed it! ❤️

@rafalmarkuszewski7772

2 жыл бұрын

this is not repair

Muito Bom, porém faltou um detalhe até aonde prestei bastante atenção, só faltou ele colocar a bateria da bios no lugar, mas fora isso deu certo! Parabéns pelo belo trabalho. ^^

@JLInacio

Жыл бұрын

Percebi isto tbem.

Esse console é lindo demais 😍

Hvala, svaka čast najbolji si!!!

@resEG

2 жыл бұрын

Puno puno hvala ❤️

Nice work !!!

Lo malo del reflow es que puede durar 2 semanas o 2 años. Es una lotería, buen video sobre el desmontaje de nuestras gorditas.

@GATTY22

11 ай бұрын

Si o si hay que va cambiar el estaño debajo de los microprosedores, utilizar estaño con plomo que es más resistente a los cambios constantes de temperatura

جميل ورائع مبدع شكراً لك 👍🏻♥️

@resEG

2 жыл бұрын

شكرا للمشاهدة والرد الجميل

Thank you my ps3 Hvala tebi sto sam pomocu tvajih redosleda popravio svoj plejstejsn 3.

@PC.Aleksa

Ай бұрын

Bros ps3 is not gonna last long

Yep!My favorite repair video:D

@resEG

2 жыл бұрын

Glad to hear it!❤️ thanks!

Ylod was diagnosed wrong for all these years, maybe because of the 360 RROD (and that was diagnosed wrong too, it was not for a break connection between motherboard and GPU, but a break inside the GPU itself). The problem it’s not the gpu or cpu chips but probably one of the NEC capacitors gone bad. With reflow you just force this component to work, but the issue will appear again. And when it will happen, check for a short in these capacitors.

@resEG

2 жыл бұрын

It still under testing, I bought 470uf / 6.3V Tantalum Capacitors, and I will replace the NEC capacitors if the issue (YLOD )will appear again again, Thanks for the tip!❤️

@elbrayxd9352

Жыл бұрын

@@resEG PS3 uses 1200uf / 2.5v capacitors, you could put 4 400uf / 2.5v parallel capacitors

@eXxtrazZz

5 ай бұрын

this was debunked tho

@therestorer1325

4 ай бұрын

​@@resEG can you do a video for the replacing I would be happy thanks

Ficou top. Já aproveito e jogou logo um jogo pesado de PS3. Pra testa logo a CPU. Top

@gemsm7377

2 жыл бұрын

mas assassins creed rogue é levinho

@AntonioCarlos-pf8or

2 жыл бұрын

@@gemsm7377 e deve ser mais os gráficos tava top

@GabrielSpider007

2 жыл бұрын

@@gemsm7377 mas é um jogo que 2014 que no ps3 é melhor que no xbox 360 e no pc o jogo fica travando

great Restoration

I've had my PS3 stopped for years. I was told that the NEC Token capacitors also caused problems. I will try to fix it. Thanks for the tutorial.

@resEG

2 жыл бұрын

thanks for watching❤️

Reheating the solder on the CPU and GPU isn't going to help, the real issue is the NEC capacitors (the flat black ones). They become slightly re-conditioned after the heat-gun treatment but the problem is going to come back. You need to replace the NEC capacitors with identical resistance and capacitance.

@Cerberus-db1bq

2 жыл бұрын

Didn’t someone discover that the capacitors was just one of the issues? I saw someone on KZread reball something and I forget what it was- I don’t know enough about motherboards to remember lol. I’ve wanted to do this type of repair to my YLOD but I keep it for a rainy day when I want to try and fix it

@B9NE

2 жыл бұрын

3 or 4 470uF tantalum capacitors to be exact for each NEC.

@mikejonez724

2 жыл бұрын

It was just recently determined that those capacitors were not the cause of the YLOD they're totally fine to keep.

@Ohem1

2 жыл бұрын

@@mikejonez724 Care to elaborate? I’m not gonna deny there could be other reasons for YLOD like bad solder points (some very early models had bad quality solder), but given the correlated result by replacing the capacitors it’s hard to argue against the methodology so I’m eager to hear the claim.

@B9NE

2 жыл бұрын

@@mikejonez724 10 to 20% could be NEC TOKINs. The majority is usually the RSX.

Muito bom parabéns

@resEG

2 жыл бұрын

Muitíssimo obrigado

This isn't just a random guy fixing nostalgic stuff .. It's THE random guy fixing nostalgic stuff and giving everything a soapy bath..

great 😃👍 ASMR relaxation

@resEG

2 жыл бұрын

Glad you think so!

Mano poderia dizer que curso você fez para aprender a desmontar e montar tudo isso véi

Parabéns Vc conseguiu colocar esse PS3 de volta a vida

@resEG

2 жыл бұрын

Muito obrigado ❤️

Que Satisfação Aspira 😎😎

Exelente work👍

Amei ❤️

@resEG

2 жыл бұрын

Muitíssimo ❤️

@SilveiraMichael

2 жыл бұрын

@@resEG mas sabe que esse reflow não é garantido ? o ideal seria substituir as esferas de solda

@makinamara321654

2 жыл бұрын

Esse canal é BR? Kk

@user-rj1kp2ou1e

2 жыл бұрын

@@makinamara321654 and you will

@imgk01

2 жыл бұрын

@@makinamara321654 não

Bonito tutorial para que funcione 10 minutos y salte de nuevo la luz amarilla. La unica solución es reballing, te cobran lo que cuesta la Ps3, es resoldar todas las soldaduras del chip y aun asi con el tiempo vuelve a morir por mal diseño de hardware como todas las consolas de Sony.

@jovas01ful

2 жыл бұрын

10 minutos no a mi me dura como dos meses más y vuelve la luz amarilla dewpues tengo que volver a calentar otra vez pero yo meto toda la placa al horno a 250 grados por 4 minutos jajajajajaja ya lo he hecho como dos veces y si funciona por un buen rato de todos modos si no lo haces ya quedaría inservible la consola

@yoshykennet4859

2 жыл бұрын

Ya no se empeñan en hacer las cosas bien y todavía le ponen que es una restauración por que lavo las piezas de plástico, es una porquería su trabajo, todos las cosas que según el restaura las hace a lo tonto sin saber

buen video esta bueno soy tecnico y esta muy bien detallado los procesos segui asi saludos argentina

great work

Все четко красиво.автор молодец.но вряд ли проработает долго

@user-ty2jp1gf2p

2 жыл бұрын

реставрация на один день)

Mi consola favorita,tiene un diseño increíble, la mía igual murió por luz amarilla,la mandé con un "técnico" y aparte que no la reparo me rompió el seguro de la tapa de Playstation y se quedó con mi cable de alimentacion.

@Cooke125

2 жыл бұрын

Should’ve just bought another one there cheap these days

@theshield1613

2 жыл бұрын

Original Ps3 looks better than the ps5

Now I can make my ps3 work again in the world of the living Thank you

This is awesome

@resEG

7 ай бұрын

Thanks! I’m glad you like it.

Exelente trabajo amigo 👏¿ tienes vídeos de reparaciones de los joysticks de controles?

@resEG

2 жыл бұрын

Muitíssimo obrigado ❤️

I was never open a PS3 fat because I never owned one but I've heard there's a lot of issues with the mostly because the motherboard I have a PS3 Slim 160gb I can say for sure that I open that one completely and clean it you have to be very careful when opening it and taking it apart one little mistake can cost you your PS3

@resEG

2 жыл бұрын

I really agree with you, thanks for watching❤️

I have the same console, same issue. I saved this video for my future fix

انا لسه ما جربة الطريقه لاكن بس واثق فيك👊👊استمر يا وحش⬆⬆

It's shocking that the fan didn't had much dust on it despite being such a old console

@michaelpopowich5095

Жыл бұрын

9 months late but I think from that this console possibly wasn't used much even with all the scratches and the ylod or it has been taken apart before idk couldn't tell you

É uma boa solução temporária mas em breve pode voltar a dar defeito , A Sony deveria ter colocado a fonte de forma externa e assim não aqueceria tanto , Mesmo com um cooler muito grande ainda deu muito defeito .

@rrmultimarcas424

Жыл бұрын

Esse defeito é solda fria?

Great video!

@resEG

2 жыл бұрын

Glad you enjoyed it

WoW nice 👍🏾

Is it a permanent solution ?

@PC.Aleksa

2 ай бұрын

If the nec tokins are problem then no but if the gpu was problem 70% of the time it will work if you do it with flux and a lot of heat

@starkiller7057

Ай бұрын

​@@PC.Aleksano need for de lidding?

@PC.Aleksa

Ай бұрын

@@starkiller7057if you’re console has high temperatures or the fan is loud than you have to delid rsx and cell .if you want to reflow a ylod console it is best to heat the chips and then delid it when you delid the chips then you can do the proper rsx reflow (do not reflow the cpu the cpu is good) and then repaste it

@PC.Aleksa

Ай бұрын

You have to use heatgun at the front and the back of the RSX

Прогрев чипа да временную работу, пустая трата времени, хотя людям контент такой заходит, но по факту эта работа псу под хвост!

Muito bom. E a bateria? Foi trocada ou ficou sem colocar? Achei excesso de pasta térmica. Mas muito bom vídeo.

Nice job 👍

Great job as always friend, that model apart from being beautiful was backward compatible, it hurts about overheating.

@resEG

2 жыл бұрын

Yes it was, Glad you enjoyed it! ❤️

@Fabulousideiumn

Жыл бұрын

That’s not PS2 backwards compatible.

I'm convinced that my first PS3 console eventually gave out because of lack of thermal paste on the CPU. But I didn't know that at the time. Plus I didn't know how to open it up, much less had the resources and/or capabilities to fix it myself so I just ended up calling their consumer service line and traded in that PS3 for another one. It was the super slim model

Thanks man

Yo tenía la misma, llegué a desmontarla lo menos 15 veces, haciendo lo que tu haces, pero me duraba 20 días a lo sumo. Al final la vendí y compre la slim.

@resEG

2 жыл бұрын

gracias por ver

@Vro_xppy

2 жыл бұрын

sad

relaxing video

@resEG

2 жыл бұрын

Glad to hear that❤️thanks!

Nice video, bro 👏👏👏👏

@resEG

2 жыл бұрын

Glad you liked it

Wow just keep going! :=O love vids especially restoration consoles. I have question for long time to ask u @Restoration EG where i can buy laser for PS2 or that is only available in Merica i ask bcuz i am from Europe ? tnx for respond :=)

The joy of fixing things but in asmr

These videos make me relax #ASMR

@resEG

2 жыл бұрын

Glad you enjoyed it! ❤️

It’s crazy how old the PS3 is now. I still remember when it was the latest game console.

lovely

Excelente vídeo.

@resEG

2 жыл бұрын

Many many thanks

Won't last long doing this. Should have Delidded the RSX cover and the other cover, re-apply thermal paste and boom you just gave this ps3 5+ years of life

BRAVO une PLAYSTATION 3 fat sauvé de la déchèterie 👍👍

That was my dream as a 13 years old young boy! But my family could't give me one at the time of financial crysis, thought. And when i was having my money, it long gone the era of it. Nice to see a restouration like this. I'll buy one for honor one day if i found one in good condition.

Muy bien organizador de tornillos👍

@resEG

2 жыл бұрын

gracias por ver❤️