Restoration of rusty old straight razor. This time better
Тәжірибелік нұсқаулар және стиль
In this video I'll be restoring an old rusty straight razor. In my last razor video the handle probably isn't as good as I can do but I'ts still my second watched video at the moment so I felt like I had to make another one with handle that sticks with the original design. (psst. the intro is a satire...)
I started by disassembly and rust removal. I used MC-51 rust remover overnight. After that the blade was easy to clean. This was followed by hours of sanding to remove some of the pitting from the blade. I think, when doing something like this you should try to find the balance of not removing too much material, as the blade is already very thin and still removing at least some of the pitting. After the sanding I evened edge on a diamond sharpening "stone" (actually thin plate amzn.to/2Xkfh0F). Then I polished the blade with metal polish compond and dremel with wool felt bits (amzn.to/2GpOpqk & amzn.to/2XhO1zO) and stropped in on 12 000 grit Micro-mesh pad someone recommended for me in the comments (amzn.to/2ICDr2i). Later I'll use a leather strop when needed. Abrasive stropping is not necessary in when using a razor but think it makes a good finish in this case.
I drew the design of the original handle on piece of walnut and cut it to shape on bandsaw. Then a shaped it a bit more on a belt sander and drilled holes for my pins. Only after this I split the handle in two halves to keep them as identical as possible. then I shaped the inside of the scales. the handle needed to fit between the scales. I also made a wedge for the other end of the handle.
I made a test vacuum chamber from glass jar and hoped it will hold up for the test and not crack. I merely added a tube to the lid and sealed it with silicone. I used cheap but powerfull vacuum pump I found on ebay. First time I tried it but it seemed to be well worth the money. Typically the ones that are not only the motor could cost easily over $100. You just need to figure out the electrics yourself. I used just a test set up with the electronics and I will do proper connections now that I have tested it works well.
The vacuum chamber was filled with Borma Wachs Holzhärter (amzn.to/2DeY9So) Which is a wood hardener typically applied to rotten wood surfaces etc. But I figured it should work similarly to cactus juice. Cactus juice would have been insanely expensive to ship (maybe $50 or more for just shipping) and I couldn't find anything similar locally. I submerged the parts in wood hardener and slowly pulled a vacuum in the chamer and waited for the bubbling to stop (wood had no air left). Then I let the air back in and the wood is left with vacuum which will then start pulling the wood hardener in. this could take an hour or so. You can see it worked because the wedge I used did not float after the process. The product I use will dry in room temperature unlike Cactus juice. But since the pieces were filled with it I wanted to speed up the drying by placing them on a radiator.
After parts had dried I assembled the handle using brass pin set I found from from ebay. I also put washers between blade and scales to allow better movement for the blade.
Thanks for watching. Please subscribe, like, comment and share as that helps me to create more content in the future.
SOME OF MY TOOLS:
RUST REMOVER: www.mc-51thebestrustremover.c...
POWER FILE: amzn.to/2URHvPq
CHUCK NORRIS’ TOOTHBRUSH: amzn.to/2YfXUj2
CORDLESS DRILL: amzn.to/2Wois77
BETTER ROTARY TOOL: amzn.to/2WF75I6
PRESS FOR ROTARY TOOL: amzn.to/2Uiv1Eu
2-AXIS TABLE FOR THE PRESS amzn.to/2WPkttl
MY FILMING GEAR:
MAIN CAMERA: amzn.to/2JvtKox
MAIN TRIPOD: amzn.to/2OlpYgn
MICROPHONE: amzn.to/2I80iDz
VIDEO LIGHTS: amzn.to/2FpJDaB
MAIN LENS: amzn.to/2Fm8yMk
CINEMATIC LENS: amzn.to/2TmNdHH
WIDE ANGLE LENS: amzn.to/2U7iJha
GOPRO: amzn.to/2U3eqU3
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ kzread.info/dron/f_s.html...
---------------------------------------------------------------------
Restoration playlist▶ • Tool restorations
---------------------------------------------------------------------
Пікірлер: 2 200
I love how he has a sense of humor even though he never talks 😂😂
@awesomeness2010100
4 жыл бұрын
That’s true comedy. Actions are able to reach far wider audiences than words ever will!
@tarunkasa9579
4 жыл бұрын
funny how words can be communicated without them being spoken eh
@infernalchaos1066
4 жыл бұрын
Buster Keaton is all the proof you need that great comedy doesn't require words.
@LostSpectre496
4 жыл бұрын
Straight sense of humor...get it...ge- yeah I'll stop...
@Thicbladi
3 жыл бұрын
Evangelos Killer mike nope memes are good although only teen memes tbh
This man doesn’t deserve all this hate
@ironicanimations
4 жыл бұрын
Ilnar Usmanov I know right?
@levissk8boy
4 жыл бұрын
This is the best name I could come up with did you not see the first 10 seconds of the video?
@levissk8boy
4 жыл бұрын
This is the best name I could come up with yeah same... but people are so sensitive these days I just knew what they were referring to hah! and I like your name btw lol
@sakuraogami6885
4 жыл бұрын
This is the best name I could come up with nah, they're hating on something so stupid.
@registrationaccount5704
4 жыл бұрын
2.7K Dislikes?! What did this man ever do to you??
I guess you can say that people couldn't "handle" the first attempt
@yishaiabro9273
4 жыл бұрын
*BADUM TSS*
@sarahmegatronprime6346
4 жыл бұрын
This comment is underrated 👌🏼
@TerrifiedTaylorGaming
4 жыл бұрын
I laughed harder than I should've.
@davidwebb1721
4 жыл бұрын
Best comment on here XD
@her0966
4 жыл бұрын
Hee hoo
KZreadrs: Leave snitty comments criticising his work Him: Casually opens package with an axe
@LLLadySSS
5 жыл бұрын
Yeah Lmfao I was about to comment on that shit 😂😂😂😂😂
@allhailthewatcher8488
4 жыл бұрын
They wanna talk shit but can’t do it themselves
@jamesfishlipsie
4 жыл бұрын
M
@KaosKontrol92
4 жыл бұрын
Axe? That's a gopnik pocketknife my friend!
@Ethan-pr1zh
4 жыл бұрын
No correlation...
He pulls out the axe like "say my handles are terrible again I dare you"
@EctopicElm00707
4 жыл бұрын
To be fair, his blade restoration was great, but the handle was dreadful
@zechariahsanders8273
4 жыл бұрын
I still didn't like his scales, they're waay too thick
@turtlemaster680
3 жыл бұрын
(Video ends)
@pandatwee
3 жыл бұрын
That axe was so extra. Loved it!!
"who's a good boy?" *pets the rotary sanding machine*
@UltimatelyEverything
4 жыл бұрын
😂😂
@GR_R2
4 жыл бұрын
Belt
@onetwothreefour162
3 жыл бұрын
My favorite part
Love how everyone hated on the first version and I bet none of them could even restore a rusty fork
@Thicbladi
3 жыл бұрын
Only people who restore stuff or know what their doing criticize stuff like this I mean I think he did a good job on the blade but the handle just didn’t look original he’s not the best at restoring wood but his metal restorations are amazing
@killerjack3737
3 жыл бұрын
@@Thicbladi The fact that you have enough faith to believe the only people criticizing are people who know what they're talking about is just too wholesome, so sure. Whatever you say, man.
@Thicbladi
3 жыл бұрын
Killer Jack no I said either people that restore stuff or know what their talking about because the average person wouldn’t see anything wrong with it now someone who actually knows antiques would be able to tell that it’s not how it should look
@killerjack3737
3 жыл бұрын
@@Thicbladi I mean, you watch enough restoration videos at three in the morning and I'm sure you can begin to pick up a bit of a discerning eye, with or without any practice in the art.
@Thicbladi
3 жыл бұрын
Killer Jack umm takes a lot more than that because you need to be able to tell what it used to look like by looking at it even if the pattern isn’t even remotely there anymore
This dude legit said who’s a good boy to a sander
@ondralavicka3455
5 жыл бұрын
You dare challenge the truth?
@RNDM85
5 жыл бұрын
I thought it was funny that he covered the bandslip sticker with tape... Go to the good boy part then rewind a bit to see 0 tape before he says good boy... Curious what the thought behind that was lol ....
@scottwallace3900
5 жыл бұрын
Tristan Perry I thank my grinder ever time I use it for not taking any of my fingers it's tried a few times over the years
@bishorb.
5 жыл бұрын
Eric Dennis probably another subliminal “subscribe” note
@leontiefmodell650
5 жыл бұрын
Even includes the obligatory under-the-chin-scratch. I was sold instantly!
I love that there is no music and just the sounds of you working.. total asmr.
@cod-beastkyx1726
5 жыл бұрын
blew4200 exactly
@brute3339
5 жыл бұрын
Play these videos at 2x the speed
@isaiah3680
5 жыл бұрын
Fun fact his earlier vids back in his knife making days did have bgm
@jordantran7989
5 жыл бұрын
legit can actually sleep to this
@pheonixmann1114
4 жыл бұрын
That Dremel can go to hell tho
That package being opened with an axe was unexpected But welcoming
@fuzzy4248
5 жыл бұрын
A suprise to be sure but a welcome one
@Bri-gq3lx
5 жыл бұрын
@Vestra I BELIEVE it's an undertale character, but I could be wrong as I don't even know if that's what they even call the fandom(I never played the game(s) so I could be totally wrong xD).
@kitohhh
4 жыл бұрын
UnAXEpected
@IronBoy-hf2lp
4 жыл бұрын
@@Bri-gq3lx close. Deltarune.
@antpaste
4 жыл бұрын
@@kitohhh missed opportunity, right? Lol
"I lost a finger doing this luckily it wasn't mine" lol that had me dying i love this channel it's great 😂😂
Came for the fine craftmanship stayed for the aluminum foil origami swan!!! Great video keep the great work.
@tommygunengineer9184
5 жыл бұрын
Swan? I thought he was trying to re-create the Loch Ness monster! lol
@elisashue5086
Жыл бұрын
@@tommygunengineer9184 looked like Nessie. Lol
“I once lost a finger doing this” “Luckily it wasn’t mine” Funny af 😂
@masonlahoe2931
5 жыл бұрын
Who's finger was it then 😑
@blipblorp
5 жыл бұрын
You had me at the first half not gonna lie
@danielvuori6655
5 жыл бұрын
Mason Lahoe r/youngpeopleyoutube
@nothankyou5524
4 жыл бұрын
Everything lost turns up sooner or later. I wouldn't worry too much about it.
@neilhewson5392
4 жыл бұрын
When did they stop being called cut throat razors?
Hes definitely hot I can see through the blurring effect
@mop9507
4 жыл бұрын
nabila huda fix daddy
@quimbus_bingley
4 жыл бұрын
That pfp says it all
@nabilahuda3447
4 жыл бұрын
@@quimbus_bingley what pfp? I Cant see Or am I blind?
@kylelawsuit6356
4 жыл бұрын
nabila huda I’m pretty sure they’re talking about uwugamez.
@nabilahuda3447
4 жыл бұрын
@Pan_With_A_Wrench same
In the beginning he said “Shave His Belly With A Rusty Razor” which for whoever doesn’t know is from Drunken Sailor an Irish Sea Shanty
@stashmerkin9576
3 жыл бұрын
Came here to say that!
Nobody : KZread recommendations at 3 am : restoration of rusty old razor blade
@shitsjon
5 жыл бұрын
Nobody: Me at 3am: mmmmm dirty thing no dirty
@Celticshade
5 жыл бұрын
Accurate
@jonesyjones2476
5 жыл бұрын
Genesis its literally 2:41 what the fuck
@carlitos9908
5 жыл бұрын
Jonesy Jones it's 2:40 for me😂
@doseofdames
5 жыл бұрын
same here at 4am
Your sense of humor adds a lot to the videos. Keep up the good work👌
@Agownsrs2
5 жыл бұрын
your*
@natecausey
5 жыл бұрын
Angelo *Your
@danteolivo9981
5 жыл бұрын
Yall literally said the same thing
@AHMED-bo1zw
5 жыл бұрын
Nathan Causey ❤️🌺❤️
@franzferdinand2240
5 жыл бұрын
@@danteolivo9981 edit..
Me: Trying to fall asleep. Some fly in 3 am: 4:17
@GamingCentral80
5 жыл бұрын
Sucks living in a third world country.
@GamingCentral80
5 жыл бұрын
@@altzu Not my fault you live in a Kenyan hut.
@Blepple_2005
5 жыл бұрын
@@GamingCentral80 salty
@cagrsengul5701
5 жыл бұрын
@@GamingCentral80 You dont have fly's in america ??
@GamingCentral80
5 жыл бұрын
Çağrı Şengül I never said that. I just don’t sleep outside.
I knew I wasn’t the only one who talked to my tools like pets! There’s dozens of us! DOZENS!
People really use this as a tutorial? I watch this shit for fun lol
@ihavenoclu_2972
5 жыл бұрын
oscar hernandez same
@ihavenoclu_2972
5 жыл бұрын
Yo, wtf I’m famous this is the most likes I have ever gotten (Edit) damn 6 likes, I’m speechless
@yourdoseofoscar
5 жыл бұрын
@@ihavenoclu_2972 lmaoo you and me both
@morrishodges187
5 жыл бұрын
Good for you..No ones cares
@aprad9526
5 жыл бұрын
Morris Hodges i care
That axe was definitely necessary to open the package. 😂😂😂
@raiptv3393
5 жыл бұрын
5:34 kzread.info/dash/bejne/nZdtutGOkdWpdtY.html
@jeanbonvart4201
5 жыл бұрын
psycho opening
@ryker1725
5 жыл бұрын
He’s a try hard for cool things
@pokeystotle
5 жыл бұрын
And to show all the douchey little bitches that crabbed last time that they aren’t actually safe.
@sleepingdragon93
5 жыл бұрын
It's a nice axe why the hell not
At 12:05 are we going to ignore the fact that he pulls out an anvil to lightly tap on the metal with a hammer
@t-kozy39
4 жыл бұрын
probably just needed a taller work surface
@Charlie97L
4 жыл бұрын
I mean, that's how you use a hammer rivet? But yeah it is a HUGE anvil for the job at hand. :)
@bodaciousdoggo8971
4 жыл бұрын
2FAST sometimes it *do* be like that
Normal People: Ill just use scissors to open the package Odd Tinkering: *wE doN'T Do tHat hERe*
@ericaleonardi6620
5 жыл бұрын
Yesterday I used my scythe to open a plastic package 😇
@Hauntwrk
5 жыл бұрын
Erica Leonardi I used a chainsaw
@ericaleonardi6620
5 жыл бұрын
@@Hauntwrk wow! Amazing idea!
@fabiogonzalez4636
4 жыл бұрын
Didn't you realize he is just trying to show the excellent work in sharpening and polishing an axe? C'mon
@thomasmurrell9832
4 жыл бұрын
You guys are wimps. Just the other day, I opened my package with my diamond sword!
When a cutter or a scissor is too mainstream to open packages.... this guy use an axe instead, brilliant!
@OddTinkering
5 жыл бұрын
Let's see who's going to use a chainsaw 😁
@davidsugia240
5 жыл бұрын
@@OddTinkering why did you blur your face, mate?
@raiptv3393
5 жыл бұрын
5:34 kzread.info/dash/bejne/nZdtutGOkdWpdtY.html
@hades_cbr
5 жыл бұрын
A cutter or a scissor?
@BloodSprite-tan
5 жыл бұрын
hold up, did somebody say chain saw? well have you seen AVE? Bosch makes a mini chainsaw. ave used it to open packages as it's pretty much the only thing it's good for.
Why am I Addicted to these videos
I think I like your restoration videos the most because they're more fun and personal. Like you leave us messages not just about what you're using/doing, but to tell jokes and humor us.
The more I watch these videos the more curious I get about how he look like🤷🏻♀️🤷🏻♀️
@neinzukorruption9321
3 жыл бұрын
there is a video where you can see part of his face. nice young finnish boy :-)
25 seconds into the video, he pulls out an axe to open a package. SUBBED!
I’m glad I wasn’t the only one that invested in a label maker.
OK, opening a parcel with an axe is just superb! Someone should carve a statue of that.
"Who's a good boy?" HAHAHAHAHAHAHAHA! LOVE IT!!!!! With a belly scratch.....classic!
Excellent job, love the vacuum pump you improvised nicely! Keep it up I love watching these videos!
Never seen him before but recently fell down the KZread rabbit hole. As soon as i saw that axe I subscribed. with his great sense of humor I regret nothing😂 although watching him cut things gives me anxiety
@miks2819
5 жыл бұрын
Me too
@thehaunted8055
2 жыл бұрын
Nice tongue ring
Obligatory naming of every liquid he puts his project in including water
@justinmielsch5936
3 жыл бұрын
Because reasons
@Bluecrimson217
3 жыл бұрын
That doesn't sound like liquid steam.
Beautiful presentation with a SENSE OF HUMOR..& no silly music! Soon u’ll have thousands of comments..BEAUTIFUL!
I thought you had a big azz joint.....😭 Lol SMH. Still watched tho
@leonkouider8869
5 жыл бұрын
Hahahaha same here
@youtubecomment2218
5 жыл бұрын
Rob Rack samee yo😂
@claudioromao2
5 жыл бұрын
ahah
@screwedupH.
5 жыл бұрын
Rob Rack i swear mayn😂
@hyair38
5 жыл бұрын
Me too haha
Who else thought the thumbnail was a joint?
@bwing6265
5 жыл бұрын
Me XD
@PSICK1234ikillallracistrolls
5 жыл бұрын
Me lmao.
@lamarcogolliday2268
5 жыл бұрын
Yes that's why I am on this video
@al3xzs
5 жыл бұрын
stoner🤣
@lucara7096
5 жыл бұрын
Me
This guy does so good with restorations and probably better than any of the haters do yet they still diss on him. Dude you do wonderful stuff. Ignore them. The only thing anyone should be commenting on is for you to be safer using your tools. Please stop getting your hands so close the the blades. Every story about someone getting hurt starts like yours.
Them: So what did you spend your Saturday doing? Me: *SANDING*
Thought that thumbnail was a joint so i clicked
@fernyjones
5 жыл бұрын
Kkkkkkkkk im High as fuck rn, thought the same tingg
@DenianWriter
5 жыл бұрын
pass the boof
@sytestorm
5 жыл бұрын
Exactly what I was doing 😅
@jamescito99
5 жыл бұрын
Hahahaha same
@fernyjones
5 жыл бұрын
5 days later, high as a kite now and looking them comments again
There's always something so satisfying about watching these types of videos
Very entertaining, amusing, and quite satisfying. Thank you, now I can have a good night's sleep.
Excellent workmanship and now a beautifully restored straight razor. Thank you for sharing.
The wood hardener and vacuum pump was genius! That would do nicely. If you do another, start with treating the wood first, then shape it. Make a fence for your saw for accurate thin, straight cuts and use the old scales (handle) as a template to match the proportions better. Practice on scrap wood first. The scales are important to the balance of the blade. Your scales are a bit too thick and heavy and the rivets stand too proud for my taste (use thinner washers next time), but it was definitely an improvement over your last razor handle. Thanks for the video.
More people should appreciate the "shave his belly with a rusty razor" joke
@forcerous_5127
5 жыл бұрын
I sadly didn't get it.
@zombiezombie0
5 жыл бұрын
That’s what you do with a drunken sailor early in the morning
Looks like you need to restore your scissors too 😅 great videos buddy! Keep it up!
I like that you are not getting demotivated by hate comments and taking it into opportunity to make changes and learn from it, most of the people get effected negative!
You've done a beautiful job on both handles 😊
I’m pretty sure most of the people who criticized couldn’t even sharpen a blade to save their lives
@tsu2613
5 жыл бұрын
The Mechanix as if sharpening a blade is hard in the slightest
@tsu2613
5 жыл бұрын
The Mechanix you are getting worked up over nothing im simply saying that sharpening a knife is possibly the easiest thing on planet earth
@themechanix2311
5 жыл бұрын
tsu Simply stating what I wasn’t talking to you Are you getting worked up by trying to stress the fact that sharpening a knife is easy? Some people can barely cook for themselves, so I’m sure there are lots of people who can’t sharpen a knife
@tsu2613
5 жыл бұрын
The Mechanix thats an obvious statement of course people do not know how to cook, it is a skill to be learned and is also much harder than sharpening a knife which literally just involves the person rubbing the knife against sharpening objects
@themechanix2311
5 жыл бұрын
tsu Not that simple Hold the blade the wrong angle and you fuck up the edge Also I’m talkin about basic cookin Not Gordon Ramsay level cooking
My high ass thought it was a joint on the thumbnail
Enjoyed watching you work, and can now say that hollow-grinding an old razor by hand definitely is a LOT of work!
When someone uses an axe to open a package You KNOW they just got serious
your videos always calm me down when i feel anxious - it helps my brain get reassured somehow. :)
@dr.celsius886
5 жыл бұрын
i also watch these videos to help with anxiety. tysytube has good videos too
@davidhayden9336
5 жыл бұрын
BUILD SOMETHING FROM WOOD IT WILL HEAL YOUR SOUL. IF IT IS USEFUL TO SOMEONE YOU LOVE THEN THERE IT IS SOUL HEALED, SATISFACTION.
@jeanbonvart4201
5 жыл бұрын
Don't harm people, do something usefull with your time, be away of problems.
I don't think anything on KZread is more satisfying than these videos
This razor turned out so much better than the previous one. Well done. ATB Marc-Belgium
Him: "I once lost a finger at these" Also Him: "Luckily it wasn't mine" Me: Intresting
I wasn't planning on subscribing but then you gave the belt sander pats and tummy scratches and that pretty much turned things in your favor. You got yourself a new fan and subscriber 👍
@stefanspyridis1770
5 жыл бұрын
Chris L yes! Haha.
I think I found my new favourite channel.
Knowledge, skill, very nice result. 3 strop hot towel badger shaving brush, mug, Truefitt and Hill 1805 shaving soap. Your razor after so much work deserves nothing but the best. I think that watch is part of your subtle humor. I know a chap such as yourself has a Seiko tuna can somewhere.
Ahh my favorite ASMR KZreadr
Haha loving this guy's personality 😂
Best type of these videos for sure. not annoying or frustrating in any way.
Beautiful work, thank you for saving this old guy ✌🏻🌟 The beginning, showing the hated comments was legend 😅 You made my sunday ⚒️🗜️👏🏻👏🏻
Damn, the sound of his work makes me feel sleepy quick asf! Great sense of humour too!
Nice job, flipping off the grippers and complainers. You do a nice job making something as mundane as salvaging an old razor entertaining! Keep doing what you do, and keep improving your level of quality... your sense of humor is great!
I could watch your vids all day . Keep up the good work
Dude, i watched few videos of you. Nothing to say but YOU ARE SIMPLY AMAZING. Great job and content. Sub
I like how there is no background music but only the sound of rust
I love that he took it as a challenge and killed it. This man is quality af. Imma let those complaints slide but if u all come for my guy like that again that straight razor gonna be gettin a lot of action.
Your videos are creative and original. I for one am thankful for your hard work.
Yes! YES! Yeeeees! Now folks, THIS is what youtube is for!
I really like his sense of humour!🤣its just worth it wasting my time here🤟
Hmm. Axe going dull? Your humor has a Canadian wiff to it. I am inspired to restore something myself.
I love this guy's humor, how I just discover his channel.
50% of the comments: - "I THOUGHT THAT JOINT IN THUMBNAIL" - other 50% "Axe.... Weird flex but okay"
@Sookyamooda
5 жыл бұрын
Elijah Young no one ever said it looks like a blunt. A blunt is made from a a tobbbaco leaf which distinguishes itself from the look of a joint.
@daanlinssen2385
5 жыл бұрын
Weird flaxe
@Sookyamooda
5 жыл бұрын
Daan Linssen flaxe wired but 0k...
@LilSnowieGG
5 жыл бұрын
✋🏼 just here for the axe 👍🏼
@eibadahmed6419
5 жыл бұрын
I see you trying this comment layout on mobile I respect
You’re so smooth man. Almost too smooth though. Serial killer vibes 😅
@Unconfined.
5 жыл бұрын
JoybuzzahzTV DONT WANNA KNOW EITHER 😅😂👐🏾👐🏾
@franc5016
5 жыл бұрын
@JoybuzzahzTV and you?
@jennifermartines6633
4 жыл бұрын
m.kzread.info/dash/bejne/fWp4w7Gadta_gNqU.html
2 functional razors, each brought out to their best. Good work on both!
Bravo! Your hard work really paid off. Looks great.
0:15 when it says: "don't use knife to open"
@makinwaves8147
5 жыл бұрын
Sebro where did you see that?!?!?!
@sebbensteb
5 жыл бұрын
@@makinwaves8147 No..nowhere... it was a joke
@makinwaves8147
5 жыл бұрын
Sebro damn I was hoping he actually put that in there!
@user-kv7pr7xs6k
4 жыл бұрын
He said ight bet let me go get my axe
Nobody: His gloves: I don't feel so good
So creative, making the little vacuum pump, what a cracking little video.
I like this guys sense of humor.
Wow You have lots of quality tools... your work are super relaxing and amazing
The "men at arms" nostalgia when the intro rolled in 😭
I'm really enjoy what you did there! No music just only satisfy sound.
I got one love your work. Pay no attention to those that seek to discredit you. You are amazing
5:33 "For legal reasons, that's a joke."
Pretty rude comments 😅 maybe you didn't do the best job in the world last time, but do those people really feel the urge to be so mean? 😅 Anyway good job! :) Edit: I just watched the last razor video and I like the handle D: it's not like the original, ok, but I don't think it's ugly.. I don't understand why people are complaining so much...
@whalethebeast2195
5 жыл бұрын
It’s not that it’s ugly it’s that it would be non functioning
@drunkenmasterii3250
5 жыл бұрын
@@whalethebeast2195 no it was ugly and this one is too thick. It's about practicality. I enjoy his restorations, but handles seems to be his weakness in most videos where handles are needed.
@Gos1234567
5 жыл бұрын
Drunken Master II you’re a prick,what the fck would you know about restoration
Lol that Man At Arms style comment intro. Loved it.
I loved it! Such a great sense of humor! I almost blew my milk through my nose with that hidden “Subscribe” sign. Nice touch. Nice guy. I’m gonna keep watching.
Great video! And I like your sense of humour;) To avoid damaging the vacuum pump, I would add an empty intermediate container to recover the foam or liquid that could be sucked in. For my taste the handle would need to be polished and varnished (comment translated by deepl ;) )
Challenge accepted challenge completed. Good job!
Keep doing your thing you're very skillful at what you do.
You really had fun making this video, love your humor.
"the channel name changed" wait I'm new what was the old name
@scarlettefoxx5585
4 жыл бұрын
Same
@Naomind414
4 жыл бұрын
The original name was DIYcoolstuff :)
@youngpotato9083
4 жыл бұрын
@@Naomind414 I thought that was someone else
His next video should be a restoration of his workbench it’s all dirty😂
I really love your videos. The way you do things is so methodic.
I fell asleep watching these videos. This guy's videos are so relaxing.
"Shave his belly with a rusty razor"....LOL.... one of my favorite songs
Dude shows off skill and hard work yet people talk shit! Bet they couldn’t even pick out the belt sander in the video.
@1xlaz2
3 жыл бұрын
I don't know how to cut hair, but I can tell when a barber fucks someone's hair up.