Hydraulic pumps are put together with extremely high tolerances in clean environments so no foreign dirt can get in. These guys take it apart and put it back together with a hammer and a screw driver. While laying in mud. Not sure what the one guy was doing inspecting these pieces. Does he even know what he’s looking for? This pump is definitely going fail completely from all the dirt that they put inside the internals. Looks like it still leaked in the end especially when I’d didn’t look like it leaked in the beginning.

@em4703

2 жыл бұрын

You'd be surprised, but they last. They wash them all with fresh gasoline, that's more than enough to dissolve and wash away all the contaminants. Is it optimal? No. But it will last a few more years of use, and that's all that matters.

@markshort9098

Жыл бұрын

Yeah he knows what he's looking for, he's just checking if if had enough dirt to make it all wear in properly 🥴

Уже сам процесс разборки вызывает большие сомнения в качестве дальнейшего ремонта.

@techkh971

2 жыл бұрын

cool

@misterigoprosto4550

2 жыл бұрын

Просто жесть какая

@xBAVx

2 жыл бұрын

А сборка молотком вообще супер))

Что отремонтировали заменили так и непонятно, заработал ли при этом экскаватор так же неясно, в общем сняли отмыли, пересобрали и в путь, на пару дней.

Разобрали, типа помыли с песком. И собрали... Кудесники епт)

@vikingmihinlank969

2 жыл бұрын

Видите, как нас в сервисах разводят, типа надо расходники менять, заменять изношенные детали, когда можно было просто помыть и все.

I watched the whole video. I’m still waiting for the “Amazing Skills”.

Ремонт это просто помыть? А что так можно было? 😆

@vikingmihinlank969

2 жыл бұрын

Где то тут было видос, про ремонт ТНВД, там принцип такой же был )

А разбирали зачем? Ни одной детали не поменяли (кроме уплотнений), даже НШ не проверили. Все как было изношено, так и собрали. Чисто помыть? Или на сдают нормы на мытьё на время :)

@techkh971

2 жыл бұрын

amazing

@misterigoprosto4550

2 жыл бұрын

Помыли в грязной жижи

@vladislavkucherenko3788

2 жыл бұрын

Да ладно! 13-20 шлифовка за кадром точно была... И да, в процессе сборки подшлифовывали с грязью.

@kuuru09

2 жыл бұрын

@@vladislavkucherenko3788 плунжера видели как запали в Цилиндры? Там выработка по 1 мм не меньше)))

@user-tt3vu2vo8h

2 жыл бұрын

это был обучающий процесс рядом пацан сидел и наблюдал спецы ему показывали а потом доверили мойку в волшебной жидкости

No torque wrenches were harmed in the making of this video.

@kenbakker3241

2 жыл бұрын

Proper torque was obtained using a "knockometer".

@kukipett

Жыл бұрын

They don't need a torque wrench, they have plenty of workers of different weight to pull on various lever lenght. That's why there are children around, just for the small bolts and the big guys take care of the big ones! Clever... no ??...

@markshort9098

Жыл бұрын

Don't need no torque wrench, just tighten it until it strips and back a 1/4 turn

Всегда обожал "специалистов " что работают на полу !

@viskyback1390

2 жыл бұрын

Особенно в песке и с гидравликой🥺

все в грязи, разобрали, поменяли резинки, намазали маслом, собрали... а ремонт где? everything is dirty, disassembled, changed rubber bands, smeared with oil, collected... and where is the repair?

@zonds

2 жыл бұрын

Tengo la certeza de que esa bomba ya la habían reparado, de ahí el color de los basculantes no pintados de rojo. Puede que hiciera relativamente poco de esa reparación y por algún mal funcionamiento la hayan desmontado, revisado y vuelto a montar. La limpieza si es algo que deberían cuidar y si quieren piezas nuevas que me llamen ;)

@TheSlayerworld

2 жыл бұрын

@@zonds Заебись! Круто!

good job, we have hydraulic pumps and parts

Dirt is death to hydraulics. No excuse, just poor training. They didn't seem to care. Grime everywhere.

Lavou tá novo,Pra que gastar com peças novas então .

Apart from the pump being dismantled, cleaned and re-assembled, nothing new has been replaced, not even an o- ring. So what was the problem with it?

@alexanderplatinotron2625

2 жыл бұрын

Just wash :) very dirty. I wrote some message but at Russian

@artyboy1958

2 жыл бұрын

I was thinking totally the same

@kitecattestecke2303

2 жыл бұрын

There where not enough dirt particles inside so they put some in now performance is raised

@rodneynikora358

2 жыл бұрын

I would of put some loctite on probably all the nuts and bolts

@Toppradd

2 жыл бұрын

Not to be precise but .. yes they did replace one o-ring .. just sayin

Special appearance; a work bench!

Класс, теперь но остался единственный вопрос, зачем ?

better than a Ritchie brothers 5 gallon overhaul

I bet the guys who built it at Hyundai would cry if they saw this

@tomrogers9467

2 жыл бұрын

Not really. Destroying equipment is good for new equipment sales!

All lines removed need to be caped to prevent contamination. We’re is the elephant.

Good brother😘

Я уже не говорю о пневматическом или электроинструменте, но у ни даже нет бит и насадок с трещетками. Они все крутят рожковыми ключами и шестигранниками....

@vikingmihinlank969

2 жыл бұрын

Дай им в руки нормальный инструмент, вы представляете, что они могли бы наделать? )

@mrsergey7469

2 жыл бұрын

@@vikingmihinlank969))))

Suggestion Cut some of the large rags into 35cm-by-35cm pieces. You will make them more usable and use fewer rags.

Good ❤❤❤❤❤❤❤❤❤

Republic of Uzbekistan. 👍👍

MR BEAN VERSION ON HOW TO NOT REPAIR A PUMP..🤣

зачем они его разбирали если новых деталей не ставили ))

@dexter2183

2 жыл бұрын

oring değiştirdiler.

@sakhmex

2 жыл бұрын

@@dexter2183 так они ставили старые на видео кольца

@user-ln3ri5zj4d

2 жыл бұрын

просто интересно что в нутри

для факеров педцентавра,там ваши.

Take it apart, roll it around in the mud and then put back together. All you need is a couple of old pallets nailed together, and you can elevate you work station 6 inches out of the mud. Cleaning stuff then standing it back on the ground, there must be a plank of wood about.

@kitecattestecke2303

2 жыл бұрын

That needs intelligence that is lacking here :-) did you see any new part that would justify the work? Nope

@user-pi8fv7zm5e

2 жыл бұрын

Ну что начинаешь то. Так глядишь прислушаются к тебе и начнут не только мыть но и новые запчасти ставить😁😁😁

@jasenalford9021

2 жыл бұрын

Exactly what I was thinking...have these people never heard of a "work table"!!!!

@cattleNhay

Жыл бұрын

Pakistan is on the lower end of IQ ranking countries…monkey see monkey do. Not me, we are #7 on the rank.

PARABENS POR ESTAREM DANDO AO JOVEM A OPORTUNIDADE EM CONHECER A DESMONTAGEM E MONTAGEM DE UMA BOMBA HIDRAULICA MUITO COMPLEXA, PREPARANDO- O PARA UM FUTURO PROMISSOR E VITORIOSO , COISA QUE SE VÊ EM POUQUISSÍMOS PAISES.. PARABENS TAMBÉM AO JOVEM PELO ZELO E RESPEITO COM A MISSÃO RECEBIDA..

God created pressure washers for a reason.

Half of the allen bolts are F****ed up in the process...good job

В начале думал не соберут а нет

They don’t even have slings ffs? No spare machine in the yard to save your back

How in the hell do these guys remember how to put this back together from memory..................................

@tomrogers9467

2 жыл бұрын

Because they do it every week or so. On the same pump. One day they might get it to work.

How to get the dirt from the outside to the inside?...must have great backs and leg muscles,I am jealous...very interesting seeing it apart

friend welcome very nice video .

Awesome work

CSA approved sandals

Nice air compressor.

무엇을 수리하는 영상입니까? 고장내고있는건가요? 청소를 하고있는건가요?

1:27 first start of a fresh rebuilt engine

Pump housing me se roker pistion to nhi nikale, kaise nikalta hai please btao

They leave the dirt on as an oil absorbent...much better then washing and its free.

*Which US city is this?*

A cheata-bar makes a great torque wrench

@10:00 Look, an actual workbench.

Explication en français

Love how it was disassembled before cleaning. But I do this type work daily and could not imagine wearing a skirt or sandals, so I guess I admire them for that.

@jaygee9249

2 жыл бұрын

You should try working in a skirt, its very liberating, but make sure you have panties on, you wouldn't want the chaps in the workshop seeing your bits when you bend over

Uhhhhhhh, looks to me like a lot of DIRT is going into the reassembly 😮.Not good

Newton meters = trust me bro

Well yeah why not.. this unit may cost around 4000 dollars which probably is the monthly salary of all people shown in this video.

If they wear their pyjamas to work, what do they wear to sleep? Bhahahahaha.

@tomrogers9467

2 жыл бұрын

Same clothes. All day every day.

OK 👍👍

But for me it is a renovation to be cleaned and new sealants, and where the replacement of pistons and valves will not work properly anyway

@carlosrodriguezdelacruz6718

2 жыл бұрын

For me also , only new seal and gaskets

Guys need to get official work tables !!!

Mis respetos para ESTA Gente con poka herramienta asiendo buen trabajo

Please donate some work table for them

If all the dirt wasn't bad enough, someone decides to fire up the grinder right next to where the pump was being assembled 🤦‍♂️

I love seeing that young boy working hard and so intent on doing it correctly!

@Thewicked

2 жыл бұрын

Joe Biden is that you?

باكستاني تسليكه😂 كلووو معلوووم إيش الإنجاز اللي عمله تنظيف ومطرقه ياخساره الوقت اللي طالعت الفيديو فيه.

Steel toed sandals ? Come on man.

Hay quá

I wonder if they ever have to go back and look at the video to put something back together properly.

Hydraulic mechanic's resume: I can squat the entire day, have open-toe sandals, loose-fitting clothing, a young son not going to school that can help, and a hammer to pound with the best of them.

Смазали маслом то, что изначально было в масле, собрали и заебись ремонт!

Ωραίοι τεχνίτες αλλά πάσχουν από εργαλεία όπως πάγκος εργασίας πλυντήριο εξαρτημάτων πάντως καλοί είναι.....

I have to get me one of those magic hammer they have!j

@vladislavkucherenko3788

2 жыл бұрын

Вы не сможете этого сделать! Эти волшебные молотки и тряпки с грязной водой имеют магию только в их ареале обитания. Не тратьте зря время - пользуйтесь своим наборами инструментов и завидуйте этим самоуверенным мужчинам!

These pumps are so difficult to rebuild properly. Tolerances are very important or it will not perform. Installation of the seals exactly correct is mandatory. In the US the money for this rebuild would be $4-5 thousand. A total rip off. I’ve seen these being rebuilt in less than 4 hours.

все понимаю, но не понимаю зачем на корточках трахаться? Стол железный не великая проблема же

@misterigoprosto4550

2 жыл бұрын

У них так принято.Все на земле

@vladislavkucherenko3788

2 жыл бұрын

Специалисты нулевого уровня и должны работать на таком уровне. Уже потом, после десятка лет такой работы им доверяют более сложные задачи - уже на столе. Это следующий и высший технологический уровень в их условиях выживания...

I can do Bangladeshi hydraulic side work I can be employed

What is this working conditions

Benches were created for a reason .

Piolet pump kiderena

Hi 👋👋👋👋👋👋👋

Young boy, work hard too👍👍 Good video ☕☕

so not one air tool was used and that one red allen bolt didn't get tighen and glad there was a new bearing, but and why wasn't the bolts cleaned and or it sandblasted or repainted and the service wasn't milled or smooth or that yellow wheel didn't get cleaned or replace the rollers that were worn or show if it even worked when it got back in :\

They tore it apart but does it work ????????????????//

naftaremont aga mitte restaureerimine...

REMEMBER: Always remove the dirt on the casing BEFORE disassembling the unit ! !

А может скажет кто господам Индусам. что на свете есть верстак с тисками . И очень интересно - кто , за что отвечает ? Кто главный?

Bhai aap ka aadres kya he

I suppose you gotta do what you gotta do ,with the limited infrastructure. BUT... If I had done this, I would end up having to buy the owner a new machine out of my pocket on these practices... just saying...

Genious

Warranty. Until is leaves the lot. To many hammers.

hi

K5V63

These guys are awesome

Ale mi to remont aby umyły i uszczelniacze nowe a gdzie wymiana tłoczków i zaworów nic im to nie da głupiego robota

HHAHAHAHAHA..what ate u doing??? Like seriously???

lifestyle in Kanakistan

Need to clean the place up how anyone could work in that shit

Ugh..what a mess🤦‍♂️

Abonnement en français

Всё самое интересное за кадром, на видео только мойка и мойка

K3V63

These are the hands that get things done!

Imagine a Hyundai technical representative viewing this video. Slaps forehead and groans いったい何なんだ! (freely translated "What the fuck!)

Гениально- сначала разобрать, а потом грязь счищать. Сразу же нельзя было, иначе это говно бы внутрь не смогло попасть

JAWA @27:29

Did it work properly? Video cut short...