Hello, my name is Mike, and it's great that you've come across my video.
This video is about refurbishing an old hacksaw that I got hold of at a household clearance. The first thing I did was to completely dismantle the saw. Unfortunately, the metal bracket of the saw was bent and I had to straighten it. While straightening it, the bracket broke and I had to weld it. Then all the metal parts were deburred and the threads recut. The surface was blasted with corundum and treated with a quick burnish, which creates a cool look in combination with oils. The thread of the screw was unfortunately defective, so I replaced the screws with brass screws. Polished, they also make a cool look. The handle was sanded down, treated with a dark stain and then also oiled and polished. The flanks of the metal parts were polished and finally everything was assembled. I think the result is impressive. A small test cut at the end was of course a must. What do you think?
--------------------
Support me and join the channel on Patreon.
/ revivemetalchroniclesr...
--------------------
If you liked what you saw and would like to support the channel, you can use the following affiliate link:
--------------------
⬇️ My Work Machines and Tools⬇️
Table saw amzn.to/3HL6bDy
Plunge saw amzn.to/3Si1tC0
Router amzn.to/3UrqSvH
Lab power supply amzn.to/3UqVeOL
--------------------
⬇️My Filming Equipment⬇️
Camera amzn.to/487sldM
Lights amzn.to/48QAG6R
Tripod amzn.to/3STwuxP
--------------------
Affiliate links don't impact your budget; I receive only a small commission from the seller, and you won't pay more for it.
--------------------
Did you enjoy the video? Then give it a thumbs up,👍subscribe to my channel, and please share it with others!
❤️Thank you very much!❤️
Mike