Response Surface Methodology Box Behnken Design in MINITAB | RSM Box Behnken Optimization
Hello
Contents of video
0:00 - Intro to machine, and material
0:17 - Box Behnken design generation in Minitab (RSM)
1:17 - Design Standard Order
2:05 - Analysis in Minitab
2:45 - Model Adequacy
3:40 - Model Summary and ANOVA
4:53 - Contour plot generation in Minitab Box Behnken
6:33 - 3D plot generation in Minitab Box Behnken
7:08 - Response Optimizer in Minitab Box Behnken
8:36 - Prediction of response variable material removal rate
Myself Mohsin, In this video I have explained the following
1. Introduction to Parameters as per BOX BEHNKEN design
2. How to Make a RSM BBD Design in Minitab
3. Data Input in Design Expert
4. Data analysis in Design Expert (RSM BBD)
5. Contour plot in Design Expert
6. ANOVA of RSM
7. 3D plot in Design Expert
8. Prediction of response in RSM BBD Design Expert
Links of all playlists are given below
Probability and Statistics
• Probability and Statis...
Design of Experiment
• Design of Experiment
Data Analysis and Optimization
• Data Analysis and Opti...
In case of problem, please contact me on 00923325056162 or miq0054@gmail.com
Follow me
/ mohsin-iqbal-qazi-1a73...
Instagram mohsin.qazi.39
#rsm, #design_expert, #box_behnken, #optimization
Пікірлер: 19
Thank you
@EngineeringandInfo
6 ай бұрын
You're welcome
Brilliantly taught Sir.
Sir in the starting how fill the navigator
Well precised 🤌
@EngineeringandInfo
Жыл бұрын
Thanks
Parameters found to be insignificant means that these parameters have no effect on MRR ""or"" still have negligible effect on the response variable(MRR). 4:18
@EngineeringandInfo
Жыл бұрын
Very minute effect.... seems to be negligible
Which article did you get the data from? Can I ask for a link to that article?
@EngineeringandInfo
2 ай бұрын
Experimental data in my lab
Thank you for the video:) how can we reach to a optimal desirability value of 0.99 during optimization? Should we have contraint where we have maximums?
@EngineeringandInfo
Жыл бұрын
Your can set the constraint to maximum. But in case of Experimentation, the range of investigation depends upon the machine operating specifications
sir how to interpret from desirability plots, What were the other two factors set to when plotting the response as a function of the main effect in each column of the figure of desirability? Displaying a response surface when there are 3 covariates is challenging. Please explain how these plots can adequately reflect the response surface.
@EngineeringandInfo
Жыл бұрын
We can't display the response surface with three covariates. Desirability is the optimization of response variable.
I hope it won't affect the analysis if we check or check not run randomize runs? am I right?
@EngineeringandInfo
11 ай бұрын
Yes. No effect.
@divyang089
11 ай бұрын
@@EngineeringandInfo Sorry for disturbing you again. By default we should go for unblocked design, if it is not instructed in assignment. I have four factorial and total response 31
what is the benefit and drawback of Number of center points 0:40
@EngineeringandInfo
Жыл бұрын
The more the centre points... better will be the central mean value.... that's why usually keep 5 to 6 points