Clever dowel maker design. We shared this video on our homemade tool forum this week 😎

대단한 기술입니다~ 존경합니다

@TreeAnWood

2 жыл бұрын

관심 가져주셔서 감사드립니다. 👍 다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~

Brilliant I really like that no t track needed fantastic many thanks Keith ❤

ITS OFFICIAL... This wins the Internet today😄🤘🏻

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

이게 말이됩니까!!! 네모가 동그라미가 되다뇨!!!

@TreeAnWood

2 жыл бұрын

해보니 되긴 되더라고요.. ㅎㅎ

Amazing! an adjustable dowel maker? Wow!!!

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. There are many other videos, so if you are interested, please watch.

Good job, but I think you need to reconsider your table saw safety techniques, good luck 👍

@TreeAnWood

3 жыл бұрын

I will take good your advice. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Excelente Proyecto.... Felicidades....

It's very useful, let's do a good job, see you again

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Que ferramenta incrível, parabéns!

Awesome! You must have spent a part of your life as a machinist/ engineer.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

EXCELENTE,FELICITACIONES.

@TreeAnWood

3 жыл бұрын

Thank you for the compliment. :)

Wonder tips thanks

Don't show every saw cut and every screw driven. The mute button and 2x speed are my favorite controls BUT this is a great project, well executed and a fresh design. Thank you and best wishes.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Nice video 👌👌👌👌👌

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Good job...

@TreeAnWood

3 жыл бұрын

감사합니다. ^^

Great job.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

That Muzak though 👍

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Amazing

very cool

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

great job. would love it if you put some plans with measurements. thank you

@TreeAnWood

3 жыл бұрын

I'm sorry. There is no drawing because it was made long time ago. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Clever

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

우와~~ 이렇게 하는 군요 ㅎㅎㅎ

@TreeAnWood

3 жыл бұрын

댓글 감사드립니다. 이 영상을 보시는 분에게 조금이라도 도움이 되시길 바랍니다.

Muy bueno extraordinario

@TreeAnWood

3 жыл бұрын

Thank you for the compliment. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@vitralzelada

3 жыл бұрын

@@TreeAnWood eres un genial en la solución y te reitero mis cordiales felicitaciones

@TreeAnWood

3 жыл бұрын

Thank you very much. 👍

What type of router bit did you use in the router when making the dowels? Great video, thanks. Andy UK

@TreeAnWood

2 жыл бұрын

Below is a link to where to buy the bits. ko.aliexpress.com/item/4000991067130.html?spm=a2g0s.9042311.0.0.27424c4dYCdQCm Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

Nice work.Great design. Despite what some say, it is not an overly complicated or complex project for someone with good table saw experience and measuring skills. I machine the ends to fit into a 5 point socket and use with a drill adapter. Keep up the good work. I would hire you for my shop any day.

@TreeAnWood

2 жыл бұрын

Thank you very much for the compliment. It's an honor for you to hire me. Always be happy and healthy ^^ I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

Now Thread them.

Very hard can cteate simple like shaperler pencil

Alat serba canggih mesin semua .coba bkin kreasi yg serba manual boss

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos

13:13 that was a monster .......... dowel :-)

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Muito bom gostei muitíssimo

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Jeeze! I hope he doesn't accidentally back over the jig with his car!

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

안녕하세요~ 혹시 저 전산볼트에 그대로 물려도 전동드릴그 이빨이 안 뭉그러질까요~?

@TreeAnWood

3 жыл бұрын

관심 가져주셔서 감사드립니다. 지금까지 사용해 본 결과 드릴에 따라 틀리겠지만 문제가 없었습니다. 좋은 하루 보내세요~~~

Genius

@TreeAnWood

3 жыл бұрын

Thank you for the compliment. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Excellent work...the entire video would be much better if you dropped the corny noise in the background like the guy beating on (????) .

@TreeAnWood

3 жыл бұрын

Thanks for the advice. 👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Buen artilugio Pero poca seguridad al usar la sierra de banco En el minuto 5.20 y 12.40 se ve la mano izquierda y la ropa suelta cerca del disco ( sierra)

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Bien chafa tu invento amigo

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

It will be possible, your advice as to how I should do or the method, to round only the square or rectangular tips of rods or wooden sticks, which are used to make beach extension chairs or deck chairs, the rod or stick, measures by a side 2 and 1/2 inches and on the other 2 inches, which would be 6.25 cm X 5 cm, that is, the idea is that the rod that rests on the floor is rounded and not square or rectangular, which would look more aesthetic. Thank you and I ask for your contact.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Será posible, su asesoramiento en cuanto a como debo hacer o el método, para redondear solo las puntas cuadradas o rectangulares de varillas o palos de madera, que se utilizan para hacer sillas de extensión playera o reposeras, la varilla o palo, mide por un lado 2 y 1/2 pulgadas y por otro 2 pulgadas, que serian 6,25 cms X 5 cms o sea la idea es que la varilla que descansa en el piso quede redondeada y no de forma cuadrada o rectangular, lo que se veria mas estetico. agradecido y ruego su contacto.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Could you produce some drawings / plans we could buy?.

@TreeAnWood

3 жыл бұрын

Sorry. There are no drawings made in the past. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Потрясающий станок и не мене потрясающий результат работы на данном станке. Респект конструкторской мысли!!!

@TreeAnWood

4 жыл бұрын

Thank you for the compliment. :)

@ginoc.p.30

3 жыл бұрын

Weon cero seguridad.

@whiteglovesmusikant6204

Жыл бұрын

ty ruski da?

Göstei

@TreeAnWood

3 жыл бұрын

.

Faster and easier on table saw for large dowels…

What is the type of user wood?

@TreeAnWood

3 жыл бұрын

I used the pine wood.

If you have a lathe easy peasy.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Metterò Heros italiano

отлично показаны методы сборки, но к чему такие сложности ??? на токарном станке круглые дюбеля сделать гораздо проще !!!

@TreeAnWood

3 жыл бұрын

Thanks for the advice. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Bisa order ga om, bikin sendiri belom sampe otak saya seperti nya. Sama alat nya kurang memadai.

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

which cutter did you use for roter ?

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I used "DCA Router Trimmer AMP02-6 " Please refer to the following youtube video. kzread.info/dash/bejne/mmWZ1MGlndzHYrg.html I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@ivanbersini16

2 жыл бұрын

thank you

Un millón de likes!!!

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

넓이 74cm-->너비 74cm

@TreeAnWood

2 жыл бұрын

관심 가져주셔서 감사드립니다. 👍 다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~

resizable large

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

The poor battery drill has not enough torque to really be good at this. It would be much better with a keyed chuck and 110v powered drill. The batteries are weak and it is no match for 110 volt drill.

@TreeAnWood

2 жыл бұрын

Thanks for the good advice. I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.

Likes too short, just ordered a large dowle off Ebay

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Bu tahta yapılışı nı bende istiyorum

@TreeAnWood

3 жыл бұрын

I'm sorry. I haven't created an old video drawing. Only these days, I added drawings to videos. Thanks for your interest.👍

Здравствуйте. Скажите пожалуйста, что за фрезер у Вас?

@TreeAnWood

3 жыл бұрын

I used "DCA Router Trimmer AMP02-6 " Please refer to the following youtube video. kzread.info/dash/bejne/mmWZ1MGlndzHYrg.html I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@mariyapopova4262

3 жыл бұрын

Порнография высшей марки.

الحمدلله

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

혹시 원주목 홀드 제작 도면을 좀 받을수 있을까요?

@TreeAnWood

3 жыл бұрын

관심 가져주셔서 감사드립니다. 👍 죄송한데 초기에 만든것이라 도면은 따로 없습니다. ^^;;

@user-op9ow1qi8u

3 жыл бұрын

@@TreeAnWood 네 답 주셔서 감사합니다^^

Bisa. Beli. Ngga

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

you should sell these

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch. These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.

Itu. Alat. Yang. Bubut. Kalau. Beli. Berapa. Bos

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

QUE BROCA USASTE EN EL ROUTER

@TreeAnWood

3 жыл бұрын

I used "DCA Router Trimmer AMP02-6 " Please refer to the following youtube video. kzread.info/dash/bejne/mmWZ1MGlndzHYrg.html I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

Ridiculously complex. Is this good for continuous production of, say, thousands, even 10k's of dowels? Lots of nice jigs

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

@root1657

3 жыл бұрын

If you are going to do that many, make it metal, but yeah, the concept could be the same, just protecting against wear and repeated stresses.

Дюпеля такие ни к чему а вот черенки для садового инструмента вполне, и если небольшая кривизна то на токарном не сделаешь а тут влегкую только скорость вращения дрели на более малые обороты.

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

@user-tz8ui5gj8d

2 жыл бұрын

Благодарю! Возможно Вы правы. Однако существуют, помимо прочего, традиционные методы, и соответственно технологии, проверенные временем требующие применения "дюбелей"(название в разных традициях разные) подобного размера. Возможно этот станок устраивает автора, несмотря на то, что, возможно, "калибрование" заготовки зафиксированной в " центрах", и вращаемой вручную, даже без токарного станка, при использовании фрезера, кажется проще. Для кого как.

🤦‍♀🤦‍♀

Не делайте как этот дядя!

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

@user-xo7cq6jd7v

3 жыл бұрын

@@TreeAnWood 🤔знать бы, что это значит...)

一

@TreeAnWood

2 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

0

@TreeAnWood

3 жыл бұрын

The requested drawing has been sent. Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos. Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~ There are many other videos, so if you are interested, please watch.

Or you can use a lathe 😂

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍 I hope it will be helpful to those who watch this video even a little. I will try to reward you with better videos.

I don't like your taste in music ( and you progagly don't like mine) so why make us listen to YOUR choice in music just to see your take on a dowel jig?

@TreeAnWood

3 жыл бұрын

Thanks for the advice. In the next video, I'll pay more attention to music selection. Have a nice day. Thank you.

@fortfrank

3 жыл бұрын

Steve Mitchell.. does your computer not have a VOLUME CONTROL ? just use that instead of being so negative.

Дружище, купи токарный станок и научись на нем работать.

@TreeAnWood

3 жыл бұрын

Thanks for your interest.👍

l

Complicated