Love the finish, I do that a lot with pieces that I attach to my van. Pretty wild driving down the road and the looks I get

Excellent, excellent video!! All tutorial videos should be like this. Thanks for posting.

I turned off the volume and watched and learned. Thanks! Beautiful result, great art quality zone here. 👌

@darlenecini5068

4 жыл бұрын

XD same lol

This is a amazing product with stunning results:-) thank you.

@smoothon

6 жыл бұрын

Thank you for watching. Don't forget to subscribe.

@MultiTom1956

6 жыл бұрын

Smooth-On ,I already have :-) thank you once again.

Impressive. I liked seeing the fact that this could be done in brass as well.

This is my first time seeing this process. Amazing and Awesome!!!!!!! I love the mold you chose to do. It looks fantastic:) Hopefully, so day I can give it a try:)

WOW! This is really interesting to watch and inspirational! I'll be keeping an eye on you guys as I'm starting up my little business soon. I'm wanting to mass produce products and it looks like I'll be able to do that with ease with your products! Cheers!

Beautiful

Bentley Advanced Materials is our distributor in the UK. You should be able to contact them for purchase.

Verry late to see ,just now ,helping boost my knowledge ,so many thanks

Mixing different pigments with the resin and metal powder can produced these types of finishes.

wow very very nice and talented:) God bless you more and more knowledge.

This is great, thanks for the video.

@smoothon

2 жыл бұрын

Thank you for watching!!

really nice prossece sir

GREAT! NICE VIDEO AND GREAT CLEAN WORK. WHERE YOU GET THIS IN TORONTO?

Is it possible to cast a positive with this method for a sculpture that has been cut up and needs to be reassembled? My first assumption would be "NO" but I thought I'd ask anyways. I guess the real question is, if so how would one reassemble several pieces, seal the seams and buff the metal?

~thanks for this tutorial, it was very helpfull !

Which tint was used in the copper example?

Smooth-Cast 325 tends to be a better gel coat material, but the same process could be followed with other resins. Note that Smooth-Cast 300 never gets quite as black as Smooth-Cast 325, so this might affect the finished appearance.

Wow nice, you have a video tutorial of how to make or process of silicon rubber mold?

@smoothon

2 жыл бұрын

Perhaps this will help - kzread.info/dash/bejne/g6yAtbiuiKq6ftY.html

Me gustó mucho

Love it!👍👍

@smoothon

5 ай бұрын

Thanks for watching, and don't forget to subscribe!

Wow amazing ... Where to buy the molder ?

Hi! Great tutorial! May I know if the same can be done for smaller pieces like jewellery parts? Thank you!

@smoothon

9 ай бұрын

You can absolutely use metal cold casting techniques for small, jewelry castings.

Is it necessary to use a silicone mold, or can you also use polyurethane?

nicely done

@smoothon

8 жыл бұрын

+nabeel john Thank you!

@nabeeljohn4875

8 жыл бұрын

+Smooth-On can you please tell me about sculpture of fibre work

instead of brushing, can I use the 325 and powder in a rotocaster situation ? I have a hollow part I want to do and would really like to have the bronze effect cast-in instead of painting. thanks

@smoothon

9 жыл бұрын

Francois Mayer Definitely, many of our customers produce cold cast metal pieces via rotocasting.

I have a question: Can I use Smoothcast 300 instead of the transparant one? It seems to be the same when adding the black tint, no?

Can you please show us how you make that reusable mold rubber on that model. Thank you so much..

@smoothon

9 жыл бұрын

The process is a pour on one piece mold using OOMOO silicone as shown in this video: Mold Making Tutorial: How To Make a Silicone Rubber Mold Using OOMOO 30

hi! I would to know how i can clean my brush after used to put a+b+powder on surface. Thank you!

@smoothon

9 жыл бұрын

Kiashaal We recommend disposable brushes, as cured resin will be impossible to clean out. Uncured resin can be removed using mineral spirits.

Given the cost of all these elements is it really viable to do these, unless its part of a restoration ok but as merely a decorative element in a home, seems a lot ,,,

Are these products available inthe UK?

Hi! Thanks for your technical. Where can I buy these products can you give the names of the liquids and browns powder. what's the store? Thanks.

Is there anything more beautiful than classical art. I font think so.

@smoothon

7 жыл бұрын

Thanks for watching!

Extremely interesting. Lea ray

where can i buy this product or other simirar in mexico?

is it good for making prop armor?

I've seen other videos where they dust the mold with the powder first I like this method better but is there a advantage of one way over the other? Also I was planning on using the Smooth-Cast Onyx, will this have an effect on witch method I should use?

@smoothon

7 жыл бұрын

It is often difficult to keep the heavy metal powder on the surface of the mold. This method eliminates that issue. This process and e performed the same way with ONYX with excellent results.

@VortexHHO

7 жыл бұрын

Thank you for the quick response.

Hi Sir, can u please make a video on how to create a fiberglass mold with out using latex or rubber?

@smoothon

6 жыл бұрын

Hi Tony, thank you for your idea.

In this video there is no mention of a parting agent being used, is a mold release not needed? Also I was wondering how well the onyx adheres to itself as in an already cured piece? was thinking of casting one color then casting the rest with another.

@smoothon

7 жыл бұрын

Great Question. A mold release is not needed when pouring a urethane resin into a silicone rubber mold. When creating a multi-layered casting, as seen in this video, you will want to make sure that you pour your Smooth-Cast® ONYX against the Smooth-Cast® 325 filled with metal powders as soon as possible to achieve a better adhesion.

Great video!! When i want to make the copper one, is it the same amount of copper powder as bronze in the video?

@smoothon

5 ай бұрын

Yes the amounts of metal powders will be the same.

Second question: is it feasible/possible to use two metal powders in a single cast? Project is a knife blade silver or aluminum with a brass or bronze hilt.

@smoothon

7 жыл бұрын

This is definitely possible, but takes some practice.

I am wondering if there will be issues using an acrylic coating on top of wax. Would there be fewer issues using an oil based coating? Thanks much!

@smoothon

3 жыл бұрын

Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/

Sweet music

good

Can these be metal plated?

From where do I get all these material in Mumbai, India?

Vc fala portugues quero muito aprender a fazer.

gostaria de contato para aquisição de moldes.

i want to do work sir

does it come in pewter?

♥.♥ Thanks For Your Nice Vids.

Is it possible to use these powders with smoothcast 320? I already have the 320 resin and pigment on hand.

@smoothon

10 жыл бұрын

It is, but the results look better with a clear resin like 325.

Check out our resin casting tutorial on metal cold casting with real bronze powder and resin buff.ly/11lBXQX #smoothon #casting

@shivanityagi5406

8 жыл бұрын

this product is in india aveleble

@sehamwosaibi

7 жыл бұрын

Smooth-On

Ive tried adding a clear coat to your products and it tends to make the object sticky over time. Has anyone else had this problem? Am I doing something wrong?

@smoothon

2 жыл бұрын

Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/

Do you sell a kit that has all these products in it, including the rubber to make the mold?

@smoothon

7 жыл бұрын

Hi Nick, we currently don't but if you contact us at 1-800-381-1733 we can guide you into everything you need.

How plyable is the material after casting? Would i be able to bend it without fracture?

@smoothon

8 жыл бұрын

Ryan, once it is fully cured, the material is rigid. It may bend if mild heat (150F) is applied.

@sathiyarajb5183

7 жыл бұрын

Ryan Calleja

Is it possible to rust the surface after everything has cured?

@smoothon

6 жыл бұрын

+Nicolas de Cosson yes, there are faux rust solutions available from art supply stores.

i'm making a fairly small figure from my mold and ended up just making a 1:1:1 mix of smooth Cast 326 and brass powder for the entire cast, skipping the brush on stage entirely. however when i put it in the pressure chamber, it seems that all the brass powder gets pulled down toward the bottom of the mold (the top of my cast) so that it doesn't have an even distribution of brass in the resin. Is there anyway to prevent this without the brush on stage? also not using the pressure chamber causes bubbles, but i get a more even distribution of the brass. any ideas?

@smoothon

9 жыл бұрын

Hi David, The settling of the powder is why we recommend a gel coat. We also recommend Smooth-Cast 325 over 326 because it has a faster cure time.

@MaximumChung

9 жыл бұрын

Thanks for the quick reply. I'll try the 325 instead next :)

do i get all this Martial to make this kind of item in Mumbai [India]

@smoothon

10 жыл бұрын

You can purchase these materials in India from: Midas Traders Pvt. Ltd. Mercantile Chambers 12, J. N. Heredia Marg Ballard Estate Mumbai - 400 001 Republic of India Tel: + 91 22 30263034 / 22643026 Fax: + 91 22 22643025 Mobile: + 91 95940 23001 / 98207 68066 midastraders@gmail.com Contact Person: O. P. MISHRA - Manager (Commercial)

Hi , where can i get this mold plz.? Iam craft makers , and soo interesting in your products. Thx

@smoothon

7 жыл бұрын

We have a full list of distributors on our site at: www.smooth-on.com/distributors/

@howzitgaunpeeps

7 жыл бұрын

went to the site using the link provided. got a computer voice and a box interface requesting password details to my hard drive. hard drive damaged and the voice telling me to go to some website to download a fix for it. didnt catch all of what it was saying. was too busy trying to close down the page the browser . anything to stop it. so theres some kind of virus there. just a heads up.

Could I please know where to find this mold?

@smoothon

3 жыл бұрын

We do not make molds, but have a list of moldmakers who may be able to help you: www.smooth-on.com/moldmaker/

What if you are casting one both sides? Like minting a coin this way, how is that done? Also, when you add the metal powder, does the final product get the weight like the metal, and does it easily break?

@smoothon

10 жыл бұрын

If you want to cast more than a one sides piece, you could 'slush' the gel coat of resin with metal powder around the inside of the mold before backing the gel coat up with unfilled resin. This urethane resin is quite strong, and will get heavier when the metal powder is added.

@justinroski4994

10 жыл бұрын

Or just stop trying to counterfeit.

@BrickMovieProduction

10 жыл бұрын

Well it's for replicating medals, with my own design, which has the coin size and that shape where I live. I have no intention of counterfeiting money, why should I do that? That is just stupid.

@justinroski4994

10 жыл бұрын

I was just kidding. :P

@BrickMovieProduction

10 жыл бұрын

Haha lol ;-)

Is there any non toxic way to cold cast? Every article I have read about using resin says its very poisonous to breathe in.

@smoothon

8 жыл бұрын

+Siha You can also cold cast using duoMatrix NEO - a gypsum based product: www.smooth-on.com/duoMatrix%E2%84%A2-Systems/c8_1174/index.html

where i can find this materials in bangalore

@smoothon

9 жыл бұрын

Hello, We have a distributor in India. I have noted below the link to our distributor list and the one closest to you. www.smooth-on.com/pages.php?pID=105 Midas Traders Pvt. Ltd. Mercantile Chambers 12, J. N. Heredia Marg Ballard Estate Mumbai - 400 001 Republic of India Tel: + 91 22 30263034 / 22643026 Fax: + 91 22 22643025 Mobile: + 91 95940 23001 / 98207 68066 midastraders@gmail.com Contact Person: O. P. MISHRA - Manager (Commercial)

Can you get a mirror finish out of this?

@smoothon

5 жыл бұрын

Not a full mirror finish, as the metal particles are not the right size for a 'chrome' effect.

how many pieces we can cast from this mold

@smoothon

10 жыл бұрын

It would depend on the detail in the mold. This is a reusable mold rubber, designed for many castings.

Can this be done with urethane?

@smoothon

4 жыл бұрын

It is better to use a silicone mold, as silicone does not require a release agent. The drier surface of a non-released casting is easier to burnish.

حلووووو

vary naic videos.... but on ditels me..

You guys should put the links to everything on your video. That way I can buy it by just clicking on the links

@smoothon

5 жыл бұрын

Great idea - we added the links. Sometimes the card links are limited so we will add them to the description if necessary.

Is there a gold one available?

@smoothon

7 жыл бұрын

+Vikas The OG. Yes, It is called Goldfinger

@zickiezickie

7 жыл бұрын

Where can I buy these metal powders?

@smoothon

7 жыл бұрын

We sell them on our website. www.smooth-on.com/product-line/metal-powder/

glad i'm not the only one to think it. lol

What if you wanted to cold cast a piece of stage armor, a wearable full breastplate...what resin product would work best for that?

@smoothon

3 жыл бұрын

You could try our Smooth-Cast 65D for that application.

Is it just me, or is the background music very similar to the music from Gran Turismo?? LOL

looks like chocolate bar :P

where I can find this materials in Qatar

looks like chocolate

It's much easier to brush the inside of the mould with a thin dusting of bronze powder before backfilling with your resin mix. Also you can sprinkle bronze powder on the resin just as it starts to set so the back will also have a bronze finish. Then all you have to do is burnish with 0000 steel wool.

@smoothon

Жыл бұрын

This can also be done, but the gel coat method can allow for more aggressive burnishing.

6:38 mmmm.....looks like chocolate......

You can purchase this material from: Mörph Industries, S.A. de C.V. Calle Lucerna No 10 tercer Piso Colonia Juárez, Delegación Cuauhtémoc Ciudad de México C.P. 06000 Phone: + 55 57094085 Phone 2: + 55 18810516 Email: morphindustries01@yahoo.com

@miosotisosorio7086

5 жыл бұрын

The mold too?

wwoowwwww

Looks like liquid chocolate

What ever happened to dialogue? Why does it have a silly soundtrack?

Step 10' steal the original from the museum and replace with the one you just made

جججججججججججججججج

ахуенна!