Thank you for making a very easy, useful and short video, I’m sick of seeing people talking for hours and doing less 😖

You are a freaking genius man! Subscribed and liked all at the same time!!!!! Our expensive plotter cutter broke a simple gear and I had to buy the entire unit to replace it. A simple cracked gear is all it is, and you just saved lots of money and frustration of cutting plans by hand with a razor knife, and never having to buy the whole part again!!!! THANK YOU!!!

Excellent video. Now I can repair my thicknesser sprockets. :)

Great demonstration, good for other similar replacements. Inspirational.

Great work pal thanks for sharing.

I have replacement gears for a 1960s Athearn HO scale steam engine for my brother and they work great. I used smooth on products for my project. I used the task 8 resin for tge gears and the dark blue silicone for the mold. It helps to use a mold release agent to get the parts out.

You are a dang genius! Thanks you

Tq. Learned something from your posting

Very good indeed, I will remember.

perfect! can you please tell me a little more about this silicon and what type of shop it should be available from.

are there not fibers like used in concrete to mix in for stronger teeth ? makes me want to 3d print models to cast with stronger material.

Great to see people makimg things like this rather than throwing the entire machine away. The corporate greedy giants probably would not even sell you a small gear like this

@Metqa

11 ай бұрын

I have an ice cream machine by bella. one tiny small plastic gear inside the motor cracked in half. It's like pulling teeth trying to get them to tell me how to replace it. They all act stupid as if the part can not be replaced but they still make the model so they MUST have gears for it. I can't use this video because I don't have a duplicate gear. the original cracked in half. I may be able to glue it back to gether temporarily but it is literally smaller than a pinky fingernail in width and the thickness of a chopstick tall.

That's amazing, I would love to follow that but I don't know how to do mixtures you use. What is the name or brand of resin and silicon you use. Because i have broken gear for paper shredder and as you said it's hard to find a replacement. I bought a new paper shredder of same brand and I like to duplicate first the good gear of it and fix the broken one so that I can use it again and not to dump it.

good

Very very good ;)

Beautifull

Put some WD 40 into to the mold ! Gear get out so easy!!

2K Harz ohne Armierung, wie stabil wird das? Ich nehme immer entweder Baumwollflocken oder Kohlefaserstaub um eine Verstärkung zu erzielen.

क्या-क्या use Kiya bhai aapane

No sé sabe el nombre de los productos

Cómo se llaman los productos que usan?

What did you do in the first A and B. Is this resin epoxy or silicone resin?

Wow excellent skill

What if the two gear wheels are of different diameters?

Thank you could you give a link where to buy these products?

@vincedeblasi4849

Жыл бұрын

I am in Canada, so I don't know if these links would work where you are. They are both from Amazon: www.amazon.ca/gp/product/B092MQN85L/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 www.amazon.ca/gp/product/B00CA5VY3U/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

@didiersee

Жыл бұрын

@@vincedeblasi4849 Thank you very mutch i'm Belgian and i speak french. Congratulations 😉

brands of silicon mold and epoxy pls. thank you

@vincedeblasi4849

Жыл бұрын

For the mold I used "Smooth-On ECOFLEX 30" liquid silicone rubber mixed 1:1. For the resin I used "HTAIER Epoxy Resin Crystal Clear Kit" mixed 1:1.

Wauuuu dónde

Hi my friend, Can you send me the names of the materials you used?

@vincedeblasi4849

Жыл бұрын

For the mold I used "Smooth-On ECOFLEX 30" liquid silicone rubber mixed 1:1. For the resin I used "HTAIER Epoxy Resin Crystal Clear Kit" mixed 1:1.

@allabena2647

Жыл бұрын

@@vincedeblasi4849 Thanks.

The link of the used products, PLEASE.

@vincedeblasi4849

Жыл бұрын

I am in Canada, so I don't know if these links would work where you are. They are both from Amazon: www.amazon.ca/gp/product/B092MQN85L/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 www.amazon.ca/gp/product/B00CA5VY3U/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

@marcop4037

Жыл бұрын

@@vincedeblasi4849 Thank you so much.

i would have mixed in some kitty hair.

Made the first K for U :-)

Which material used in making forma. Nice please reply for onward subscribe thanks

@vincedeblasi4849

Жыл бұрын

The mold form was made of scrap 1/4" plywood glued together with hot-melt glue. I should have waxed the interior to make the silicone release easier. The silicone rubber mold material is a "Smooth-On" Silicone Rubber Compound with a 1 to 1 mix ratio. The replica was made with a 1 to 1 mix ratio Epoxy Resin and Hardener.

@mustafaerkek4263

Жыл бұрын

Can it be used as a gear permanently such as plastic one? Have you tried?

@vincedeblasi4849

Жыл бұрын

@@mustafaerkek4263 the resin gear is still working perfectly after 2 months daily use.

@mustafaerkek4263

Жыл бұрын

@@vincedeblasi4849 I appreciate.Thank you

Nama lem cilicond nya apa ya?

@vincedeblasi4849

8 ай бұрын

For the mold I used "Smooth-On ECOFLEX 30" liquid silicone rubber mixed 1:1.

Alt yazı kullan.

3d printing is more easier than this process

@tomc8157

Күн бұрын

True, but you'd have to find a STL or make your own 3d model of it. Which I'm doing now since mine doesn't exist in the real world or virtual.

the problem is new gear will be smaller

Заменили пластиковую деталь на деталь из эпоксидной смолы без каких-то добавок, и это должно потом в каком-то механизме работать?🤔 🙄 Перестаньте такие опыты делать

I wonder of I can copy my thumb release. Its old and made.of.plastic and started to crack..saddley they are.not made anymore and i really like this model...i dont want aluminum because it gets cold when hunting.