I'm planning to make for our hardworking church workers for this Teachers and Pastors appreciation sunday.

Love this tutorial...brilliant. Thanks for sharing

So relaxing and satisfying 🤩

Love this!

I love them!❤ I'm going to give it a go today!😊

How wonderful!

So beautifully done. Thank You For Sharing♥.

These are so beautiful! You did a wonderful job - thank you so much for the inspiration! I’m starting to get my toes into resin (no pun intended) and was wondering how to put words/scriptures into resin art and this is perfect!!

Very beautiful

Beautiful! Thank you for sharing! 🙏🤗💜

@Artshabits

Жыл бұрын

Glad you enjoyed it🙂

absolutely beautiful.

@Artshabits

2 жыл бұрын

Thank you Joanna❤️

Love this 😍😍

Preciosos 😍👏🏼

Absolutely beautiful 🤩

@Artshabits

2 жыл бұрын

Thank you so much ❤️

Beautiful colours chosen & lovely words ❤ Thanks for sharing x

@Artshabits

10 ай бұрын

Thank you so much!

Lovely bookmarks, I would jus like to know how can you prevent from bending as I have made before and they were bendy, I want to make another one, without it bending.

Beautiful work

@Artshabits

3 ай бұрын

Thank you very much!

Beautiful xx

@Artshabits

2 жыл бұрын

Thank you Susan for stopping by.

I'm Thai. I'm trying to make resin, but it hasn't worked. I tried to study many methods. But your clip made me understand a lot more. Gave me a lot of knowledge. I feel lucky to have found your clip. Thank you for sharing. Your work is very beautiful.

@Artshabits

3 ай бұрын

Hi Milada, I appreciate it so much. Thanks for watching 🙂

Love This ❤️

@Artshabits

2 жыл бұрын

Thank you Sandy ❤️

Thank you! I have a friend who wants me to make bookmarks for his church group & this is going to be so much easier than trying to figure out the library's vinyl cutter. Well provided I can get the black ink working on my printer again anyway.

@Artshabits

2 жыл бұрын

Hi Nirrina thank you and I'm glad I was able to help ❤️

@sallymoodley1422

Жыл бұрын

I agree...I pray your bookmarks came out great. Amen.

Thank you so much 😍

Can I replace the heat gun to hair dryer? And how long is the bookmark silicone molder that you use?

Very nice ❤

@Artshabits

11 ай бұрын

Thanks 🤗

Hi, you may have figured this out by now, but I imagine you would save a lot of time if you had simply created a text box in word or whatever you are using with the dimensions of your bookmark (or slightly less for margins), then print it out already formatted, instead of doing each line individually. I am bout to get started with Resin art myself as soon as the supplies come in. Been wanting to figure out the best way to handle prints, so glad to see the stickers work. Curious if you are using a 100% clear, or if one of the frosted solutions work. Or if waterproof matters in this application. Seems there are a lot of transparent options that end up being frosted, or not 100% clear.

@Artshabits

Жыл бұрын

Thanks John for your idea and will definitely try it. 😉 I used a transparent vinyl sticker that is 100% clear and does not frost when placed on resin and it is also important that the sticker is waterproof to avoid any problems.

I like it I want to souvenir it on my 18th birthday ❤️

@Artshabits

2 жыл бұрын

Hi thank you for watching. You can try this souvenir idea for your birthday.

Love this, so beautiful and a smart way !

I love your art work. Keep it up! Your new subscriber from Philippines.😚

@Artshabits

Жыл бұрын

Hi Thank you for stopping by Kabayan🙂

@homemakerspassionofficial

Жыл бұрын

@@Artshabits Wow! So you are Filipino too? And christian? God is really amazing!😊

@Artshabits

Жыл бұрын

@@homemakerspassionofficial Yes po ☺

Hi, beautiful work I have tried clear printable vinyl. do you need to coat it with something to stop it from smudging? Thank you.

@Artshabits

Жыл бұрын

Hi Elaine thank you for stopping by. In my case, I don't coat my vinyl with anything as long as the print is dry it won't smudge. I recommend using a good quality Vinyl. 😊

What printer are u using? I love it.

These are so pretty! I just bought molds, can’t wait to start making these. What did you use for the words? That looked easier than using vinyl.

@Artshabits

Жыл бұрын

Hello there, thanks for visiting. Actually I used vinyl sticker 🙂

wow so beautiful u made that one perfect! :3 wish ik how to make them :( 😢

@Artshabits

2 жыл бұрын

Hello mimi thank you for stopping by. You can also make rein art like this, I know that its not gonna be easy at first but with patience and determination. I know you can also do it😊

HI there do these bend a little if you over handle them? I have tried this twice and they break s. Am I using too much of 1 thing and not the other? Please help me they are beautiful and I would love to master this. They are easy enough but where am I going wrong?

@Artshabits

Жыл бұрын

Hi Moko, It can be normal for some resins, when poured in a thin layer, to be bendy. Some resin can be flexible after the full cure time. It may get harder by giving it more curing time, but that doesn’t always work. If you want to give the resin extra time to cure, make sure it stays warm and give it another two to seven days to fully cure. Another is your resin may be old or they haven't been stored properly. Also using colours not designed for resin may add water to your resin this may result in bendy, breakable pieces or resin cures sticky. If you think you try everything and still these problems occurred try to consider changing your resin brand. I hope these will help you, don't be so hard on yourself success always comes with failures, keep trying and experimenting 🙂

Just love these!💕 What is the font that you are using and what is the size?

@Artshabits

2 жыл бұрын

Hi thanks for stopping by. The Font I use is Gabriola and size 15

@trulyblessedsharia2681

2 жыл бұрын

@@Artshabits Thank you kindly 💕🌟💕

Hello! I really love your works! I just wanna know if the doming process is the mixture of both resin and hardener with the same ratio you used when you did the first layer?

@Artshabits

2 жыл бұрын

Hi Xindesu. Thank you! Yes same process as the first layer always mix resin and hardener before using 🙂

It's adorable omg😭🍓Can i color resin with water or acrylic colors or it shall be powdered

@Artshabits

2 жыл бұрын

Hi thank you for watching. You can use acrylic paint, alcohol ink or resin pigment but don't add too much or else resin will not cure properly.

why is when I use uv resin and item is done curing that it is morphing upwards. every time I do it everyone of them bends.how do I fix that.

Hi KastingHub, Beautiful!! Can you please tell me if you used a matte or glossy transparent vinyl sticker for this project? I couldn't tell by following your link. Thanks in advance!

@Artshabits

Жыл бұрын

Hi Mack, thank you for stopping by. I used transparent vinyl not glossy. 😊

@chrissiemack

Жыл бұрын

@@Artshabits Thank you for such a quick reply...I'm new to this and its a little intimidating! 😊

Beautiful! Are you using an inkjet printer? Thanks so much for sharing!

@Artshabits

Жыл бұрын

Hi Rui thanks for stopping by. Yes I'm using an inkjet printer

@RuiandCarla

Жыл бұрын

@@Artshabits thank you so much ❤️

This is amazing! How did you do the scripture stickers?

@Artshabits

Жыл бұрын

I printed it on a transparent vinyl sticker.

@BabyInYoutube

Жыл бұрын

@@Artshabits lamminating or not?

Can I use a regular printer or does it have to be inkjet printer?

@Artshabits

Жыл бұрын

Hi Margie, This kind of transparent vinyl sticker is only compatible with Inkjet printers.

Amazing,from where did you buy moulds?

@Artshabits

Жыл бұрын

Hi Maltee, thanks for visiting. I bought the mold here in Philippines in our local store. This can be purchased also on Amazon and AliExpress. 🙂

Do the vinyl outlines disappear with the resin topcoat?

@Artshabits

Жыл бұрын

Hi Carmen, They are not very visible when coated with resin.

Hi, edges of my stickers sometimes came out in after pouring resin, and then it ruined all my work, any tip? What I'm doing wrong?

@Artshabits

Жыл бұрын

Hi thank you for stopping by. Use a vinyl sticker with an adhesive, let the resin cure before attaching your vinyl and then dome it.

@sistersinthekitchen4284

Жыл бұрын

@@Artshabits yes I used vinyl sticker sheets with adhesive, always wait for 1st layer to cure, but when I pour final laye edges came of sticker and then they pop on top layer looks very unfinish

Great video. Better without music.

7:09 what did u use for cleaning

@Artshabits

Жыл бұрын

Hi Asia, thank you for stopping by 🙂 I use cotton buds to clean excess resin.

Laser or inkjet used to print labels?

@Artshabits

2 жыл бұрын

Hi Diane. I used Inkjet printer with pigment ink.

@mayaelle1298

2 жыл бұрын

@@Artshabits Pigment ink?

Can I use transparent sticker instead of transparent vinyl?

@Artshabits

2 жыл бұрын

Hi Lee thank you for watching. Yes you can use transparent stickers

@leebee6243

2 жыл бұрын

@@Artshabits you're welcome thank you for give me inspiration

Hyyyy i really love your work as a Christian I really wanna do this nd I like to gift this... Can you please tell me abt the golden paper.. Pleeeeessssss

@Artshabits

Жыл бұрын

Hi Rakkshita thank you for visiting my channel. The golden paper is called Gold Flakes

7:52 how long do u let it cure

@Artshabits

Жыл бұрын

I usually cure it overnight or at least 6 hours before attaching the stickers.

are these moulds reusable

@Artshabits

Жыл бұрын

Yes its reusable

Na akú fóliu to tlačíte prosím?

@Artshabits

Жыл бұрын

Hi Eva, it's a transparent vinyl sticker. 😊

Hi...where will I get vinyl sticker?

@Artshabits

Жыл бұрын

Hi Jain, I bought mine on Shopee here in the Philippines but this can be bought also on Amazon, AliExpress and in some DIY stores.

@pritijain7453

Жыл бұрын

@@Artshabits thanks a lot..wonderful creation

Mhm yeah appreciate the work but why is the song so catchy? 😁

@Artshabits

Жыл бұрын

😅 Actually the original song was copyrighted so KZread chooses the song😁