Spectacular video of this procedure, you have the knack of voicing what other people need to know..even if they do not know it yet. Funny enough I have to pull mine this next couple weeks for a re-seal due to leaks progressing to probable air leaks causing running problems so this and your timing video has given me great confidence where before I had very little.

@downtheshedwithbyron

2 жыл бұрын

Sweet bro

@deanwitt7903

10 ай бұрын

@@downtheshedwithbyron quick question . I lined my timing marks up at TDC with the Z marks all lined up and removed the timing sprocket with puller . However I have a feeling I may be on the exhaust stroke and not the compression stroke . The pump has gone in to be rebuilt now but is this going to matter ?

I think we can safely say you are now classified as a ‘guru’. Also, well done for actually posting the first quality video/tutorial on arguably the most daunting of all repairs on this model type. 👍

Loving the Gq series, quality content and quality workmanship 👍

Doing this swap as we speak this weekend and this is the only video I found to actually help me Alot along the way without having to jump video to video 👌👌thanks man big help

@downtheshedwithbyron

3 жыл бұрын

Thats what its all about helping out a mate 👍 Take it easy bro

Very in-depth video mate! Good stuff and keep it up!

Hi Bryon, Man you are one cool dad . Love how you get you children involved with the projects . The bids are very informative and clear to understand. I wondering anyone could help me . I have D21 TD 2.7 turbo . Went to start this morning cranked over . Sputtered then blow a load of blue smoke then dropped. The has good compression and brand new head complate with valves ect about 40 thousand kms ago , block bores fine

Top notch job!!! Best video I’ve seen so far regarding removal and install of the IP. I’m currently researching how to do this on my TD27 powered Nissan Homy, and it’s tough to come by any sort of useful information on this subject here in the USA(especially when it was never even sold here). This video was so helpful. Thanks for taking the time to do this and share it with us.

@downtheshedwithbyron

8 ай бұрын

No dramas mate im glad i could help you Take it easy Byron 👍

What an awesome channel I have just found! You legend!!!

@downtheshedwithbyron

2 жыл бұрын

Cheers Dan Take it easy mate

Another Quality video mate well done.

Awesome video, thank's for sharing !

Byron - Thanks so much for this video - we are a shop in the US and we can't find any service information for this vehicle - your help has been amazing 👍

@downtheshedwithbyron

5 ай бұрын

Sweet hope all went well

Very helpful m8, two thumbs up👍🏾👍🏾

I could have used this a couple years ago 🤣 love the vid Byron!

Super detailed and actually shows eveeerrything and where shit is and size really good video mate

@downtheshedwithbyron

Жыл бұрын

Cheers bro

Bloody great video mate cheers! 🍻

@downtheshedwithbyron

Жыл бұрын

All good brother

Awesome mate I’m just about to do the same on my GQ thanks for the tips 👍👍

@downtheshedwithbyron

3 жыл бұрын

No dramas mate Take it easy 👍

@dcmprospecting5429

3 жыл бұрын

Hey mate did you have a contact email address I also make and sell stuff to suit GQ I like to send you one for you and the Boys to use while out 4wding 👍🏼

@downtheshedwithbyron

3 жыл бұрын

Mate that would be awesome Probably through the Facebook mate facebook.com/Down-the-shed-with-Byron-108421360945303/

Hey mate thank you I’m taking my pump out this week thx for your video

@downtheshedwithbyron

Жыл бұрын

No dramas bro

Wicked vid and info. Will be putting my 12mm on very soon. Keen as 🤞🏾

@downtheshedwithbyron

2 жыл бұрын

Yeah boy

Awesome video . I know not much about diesels but I’ve got a leak on the inside by look of it on the injector pump so I reckon it’s time to pull it out myself and send it to be reconditioned. Your video might have saved me alot of money . I know a garage would rip me big time for this job . Thanks .

@downtheshedwithbyron

Жыл бұрын

Good on ya mate have a crack

The long bolts off the cover plate will also fit into gear bolt hole if you don’t have a puller , this is almost identical to the D21 Navara TD27 pump removal ….

@downtheshedwithbyron

2 жыл бұрын

Thanks champ 👍

Just an update , all the I for you you gave on this vid was identical to doing the injection pump on my 1992 TD27 D21 Navara , thanks for the awesome vid it gave me the confidence to do the injector pump myself albeit with slightly less room than the td42 , many thanks 👍👍

your videos are fuckin quality mate. very underrated channel. keep it up buddy, take it easy

Very helpful video mate

@downtheshedwithbyron

9 ай бұрын

No dramas mate

Very thorougher mate 👍🏼 you’re only missing the Barra 😉

@downtheshedwithbyron

3 жыл бұрын

Haha cheers mate

Good man. Some good tips

@downtheshedwithbyron

Жыл бұрын

Cheers mate

you make it so easy

Nice 👍🏻

@downtheshedwithbyron

Жыл бұрын

Cheers

Grouse channel mate subscribed

@downtheshedwithbyron

Ай бұрын

Cheers mate 👍

Champion

Number 1 again

Mate, how did you prevent the timing gear (and crank) from turning when you torqued it to spec? Also, in regards to your other vid on plunger adjustment, I was just curious where your pump timing marks ended after using the tool to adjust it? Were you back to being lined up or advanced? Thanks heaps!

@downtheshedwithbyron

3 ай бұрын

Hey mate To Torque that nut up i didn't have any dramas of it turning Crack? Id say it wasnt located right maybe After doing that plunger high im not sure where it lines up id have to have a look

I have a small fuel leak on the line under the injector pump. No the fuel delivery lines. What do you suggest?

@downtheshedwithbyron

Жыл бұрын

Sorry mate for a super later reply How did you going? Get it sorted

Hi Byron. Td42 pump leaking, can I replace washers and rubber o rings with patrolapart kit? following your instructions to take it off then replace?

@downtheshedwithbyron

2 ай бұрын

Gday mate Could give it a go and see how you go mate

@bears2604

2 ай бұрын

@downtheshedwithbyron wasn't sure if if leaking meant it was always something more serious! But if it can be just some rubber o rings and washers I'll give it a go' thanks mate 👍

no scouring ,no lip . Injector pump was reconditioned about 5 yrs ago by previous owner . Not during giving it just got new seals as he could not start it . I changed the fuel filter blend system . notice the little gauze thimble fitting under banjo belt was missing ! Also when changed the filter I bleed any water out of the old one . The alarm on dash need not light up . There was a fair big in . I took of the little hose supply near the in injectors and primped the system again .Just hot I flew drops ? So i got my mate to turn on the ingition thinking cut off solenoid may be closed. Could not hear anything . Only the relay to the glow plugs . Checked power to soleloid. Getting 10.8 volts . Also when tried to prime I notice diesel going out of the injector pump . The plumger was firm . That when j thought maybe the solenoid not opening. Please I anyone has any ideas . I much appreciate it . She been a great reliable truck and got very fond of her . She had lots of love and well cared for suspension, Oil changes , new gearbox ect Thank you so much anyone .

@downtheshedwithbyron

Жыл бұрын

Hey did you still have a dramas with the patrol or work it out

It is the line under the front of the pump.

@downtheshedwithbyron

Жыл бұрын

Rogee

Are they good on diesel ? Are they burn alot ?

@downtheshedwithbyron

Жыл бұрын

They love the diesel mate

Any Rough idea on when the ve front wheel hub how to vid will be up bud? Package came earlier then expected 🤣🤦🏽‍♂️

@downtheshedwithbyron

3 жыл бұрын

Ill try and help you out tomorrow bro but it will be on a wh statesman some process

@downtheshedwithbyron

3 жыл бұрын

Hey Shane All done i hope the video helps you out 👍

@stabrio78

3 жыл бұрын

@@downtheshedwithbyron yeh sweet, thank you mate, will go check it out now 👌🏽

For some reason my GQ won't start when it's under half a tank. You think the fuel pump could be stuffed? Or something else

@downtheshedwithbyron

Жыл бұрын

Not sure dude havent had that fault before. Do you need to prime it to get it going again? Could be lift pump Ive got a video on teating your fuel system maybe try that

@TheAgeOfTheWolf

Жыл бұрын

@@downtheshedwithbyron nah don't need to prime. Starts fine when fuel is full. It's bloody odd haha. I'll check out the vid

@downtheshedwithbyron

Жыл бұрын

kzread.info/dash/bejne/qZptqJNxitGogrQ.html

@downtheshedwithbyron

Жыл бұрын

Faulty gauge?

how many km on when you changed it and why was it getting noisy

@stevenhropic4744

2 жыл бұрын

And what was happening with it. Did the revs just run away on the old pump, what causes that?

@downtheshedwithbyron

Жыл бұрын

Gday guys I used a pump that my mate had sitting on a shelve for year, km dont know. This is our old project gq patrol sowas use the part we had. And after 17 year out of trade school i remember the old fella telling us if you need to shut of a diesel use a block of wood so i had that ready and yep it ran on. Why so i give the pum to A1 Diesel in Perth for exchange for another 1 for my mate GU just a 10mm and i asked old mate for a quick report. The spill ring on the rotor has seized and has taken out the governor lever. So yeah that about the stroy. If yous get time check out the project GQ we our building Take it easy Byron 👍 kzread.info/head/PLT3hYQMIKL8vWtsn-MOAa5iDiQTx6JSju

Any link to the correct size h puller please

@downtheshedwithbyron

Жыл бұрын

Snapon H puller similar to the steering wheel puller

Hay mate any issues with the timming ect ?

@brendonlumani4448

2 жыл бұрын

Jjst about to do mine and yeh bit scared to do

@downtheshedwithbyron

2 жыл бұрын

Hey mate no dramas runs sweet but ive bought the tool to do the job should do a video on it

@downtheshedwithbyron

2 жыл бұрын

Give me a week or so and I'll see what I can do 👍

does it have to be a specific piston at TDC or just match the two timing marks and you’re sweet? about to tackle this job on my gq and don’t want to stuff it up 🥲

@downtheshedwithbyron

2 жыл бұрын

Gday mate TDC of cylinder 1 making sure the timing marks line up

@jayarre1839

2 жыл бұрын

@@downtheshedwithbyron probably a dumb question, but can you determine what cylinder you’re at tdc on, without checking if the valves are rocking?

@downtheshedwithbyron

2 жыл бұрын

Yeah mate with the timing mark on the harmonic balancer then check if the timing marks are lined up on the fuel pump drive gear Z in to ZZ

@jayarre1839

2 жыл бұрын

@@downtheshedwithbyron awesome, cheers heaps mate! bloody helpful video.