Replacing tap washers and O rings
Тәжірибелік нұсқаулар және стиль
Here in detailed description, is how to replace a tap washer, the fibre sealing washer, and the spindle O rings. Access to these parts and the lubrication of the parts is covered in detail.
This videos is linked to my website, sdbplumbing.com.au/ for my plumbing business. My business being in Brisbane, Australia. Please enjoy.
Пікірлер: 88
This is the best youtube video for repairing a tap .. not sure why, but all other vids neglect to replace O rings and fibre body washers
Kudos to you Sam, serviced the ancient kitchen taps today.
Your description of where the leakes will show on the spindle was a game changer.My o ring needed replacing a following your instructions made it easy.Thanks 👍
It doesn't get any better than this. Clear and concise.
This is the best basic plumbing educative video on youtube. Good job mate.
@northsidebrisbaneplumber7008
Жыл бұрын
Wow, thanks!
Just took me ten goes until I Finally found a good replacement video. Appreciated Blokes 👍
Thank you for explaining what/where it leaks when which part is compromised! Not a lot of videos do that - just fixes the problem, no further knowledge. Much appreciated!! Great video!!
Simple but the best explanation. Thanks. Had a plumber in to look at mine leaky taps. Advice is I need to replace them which costs $490 for 4. These taps are only15 years old. I will do what you said and see whether the problem is solved.
@northsidebrisbaneplumber7008
4 жыл бұрын
$490 for 4 taps is very expensive!
Bro I was waiting for you and those brass washers to get a room!
Cheers mate. Was wondering why my repair didn’t work. Missed the O Rings. You saved me $50 - $100 😊
Nice and simple, so easy to follow. Thank you! You should do more videos just like this one for other plumbing fixes. I’d watch them!
@TS-yd6cn
2 жыл бұрын
Me too, this video is just so straightforward and reassuring!
Thanks. Appreciate the detail on the black rubber o-rings.
Great video, thanks. Discovered a groove in the seat of my cold so yeh, more work to do. But it's improved a lot. The cold was also missing the red washer for whatever reason. They both had a little teflon tape on the spindle threads, so I re-did that also. My old crappy washers had swelled up and would not fit back up through the bases. Used side cutters and needle pliers to force them out.
Excellent video. Clear instructions and I got to know what I need to change to stop leaking tap, thank you.
This is what I am looking for. Best explanation and easy to understand. Thanks
Clear. Concise. Informative. Good video. Thanks mate.
Thanks, helped a lot. I changed only tap washer and body washer as my tap was leaking. Seems fine for now. I didn't do the o ring yet but will do if it leeks in future.
A pro sharing his craft......priceless ! Ty Sir
Brilliant! Utterly brilliant - I hope the plumber I call is as professional in dealing with the dripping hot water tap over the wash hand basin as you are in this video. In this instance I would accept cheap & cheerful (washer replacement) why? because both the sink & tap hardware will be upgraded soon - still in the process of searching for a compact wash basin. I also want to replace all the bathroom hardware: (hot & cold)shower & bath set, also have a shower rail with hand spray installed, need the tap outlet over the bath replaced and also the hot & cold taps over the laundry trough & finally the washing machine taps & inlet hoses to the washer need replacing. Oh almost forgot - those dreadful grab rails over the bath also need to be replaced to something a little more sleek in style, & finally there is the mixer tap in the kitchen it is cumbersome for pot washing - worst design ever. I therefore need a plumber I neither have the skill set nor the tools to do the work. I procrastinate getting the work done because I have yet to find a plumber that I feel confident will A). do the work, & B). not over charge.
You made it so simple and easy to understand. Thanks mate.
Thanks for that. Great instructions and explanation.
The best video DIY on the subject ever - pity you are not in Melb. We would use you for the too hard stuff! Congrats
@northsidebrisbaneplumber7008
4 жыл бұрын
Thanks Debbie
Excellent Small & Precise Video, many thanks.
Excellent video...off to try to fix my garden tap now
Very helpful thanks. I'm going to try the needle nose pliers method of removing the o-rings, instead of a tiny flat head screw driver. I love hearing the "proper English" terms like spanner wrench, anti-clockwise, tap grease , etc 😊. lighting and camera work could use a little improvement but good work .
great video, clear and able to follow, love to see more!
A great video! You should do more for other little plumbing jobs
Mate simple and great instructions!
Thank you very much! it's very helpful to me this morning!
This is the very useful video! Thanks!
Very good instructions, thanks for that!
Top video, concise and complete
I like how you say Very Good. It is very good!:)
Thanks for your video, you explained it very well 😊
Very information and straight to the point. Top job /ThumbsUp
Great video, very informative
Best video I’ve seen - thank you
@northsidebrisbaneplumber7008
4 жыл бұрын
Thanks hope to do more soon
Excellent stuff. Thank you.
Best explanation ever. Question though. Your spindle had 2 'o' rings. Every spindle I have bought at Bunnings or even those I repaired only had one 'o'-ring mounted. Why different???
very good. I learnt a lot. Thank you
thanks for this explanation!
thankyou i have exactly the same taps.... although i discovered a couple of bits missing in mine and my cold water taps' shroud does not sit flush on the basin 🤔 never has....i will have to use the reseating tool though as it's still got a bit of water coming out after i turn the water tap off ..... the hot water all good 👍🏼
Awesome video! Thank you.
Really nice video. Thanks
Greetings...Thanks. Appreciate your info. Bathurst NSW.
you are a pro bro, very well explained
Perfect explanation champ!
Appreciate this video champion, thanks!!
Good video,well detailed.
Excellent explanation. Thankyou.
Brilliantly explained. TY
Thanks for making that video
Wow thank you! I was just about to call a plumber. :)
Great vid.
Great instructions
This is a very good basic tap maintenance video but before commencing this job do turn off the water at the mains where the water enters the property. If this is not done, you will surely get a good shower when you remove the tap spindle. Another important step is to make sure that the seat where the tap washer is to seal is clean and smooth. And don’t forget to turn the water back on at the mains on completion. Even though doing this job is probably illegal, it is a simple task requiring only basic skills.
Cheers mate, just saved me a big bill
Great Video, thanks so much!
Brilliant thx for your tips
Great video
Cheers for the video! My spindle doesn't wind all the way down like yours...could it be the threading inside of the spindle needs servicing?
Very Good Thank You !
Thank you, you're a life saver, but now my tap goes round and round, help.
Off to buy some brass tap seats, thank you.
Very helpful Thankyou!
Thankyou very much
Well explained
Should you/I apply the grease to the red fibre washer too? That is where my hand basin tap seems to (still!) be leaking from... Other reading I've done says that the fibre washers absorb a little bit of water and expand to provide a better seal and I'm not sure if a layer of grease will stop them being able to do that.
Do you have to turn the water off at the fence first?
Thanks. Why didn't you lubricate all the rubber rings?
Thanks for such a thorough and informative video. May you get good karma for this.
What size of 2 rubber O'Ring..?
Old spindel turned brand new? What happened couldnt remove old one?
DO MORE VIDEOS PLEASE
you put too much greas on should be under o ring too to stop them rotting thats what its for and whats the size of the o rings.
thank god for u tube
Good video but you didnt make something very clear. How do you feel about the brass seals over the plastic ones
@30ksubs34
4 жыл бұрын
Just used the plastic, works gr8 :)
material list would of been nice.
So that was the brass one, not the plastic??? Haha
That's a shifter mate
Best explanation ever. Question though. Your spindle had 2 'o' rings. Every spindle I have bought at Bunnings or even those I repaired only had one 'o'-ring mounted. Why different???
@redangrybird7564
4 жыл бұрын
I think the double O ring taps are of higher quality.