Great video! I’m 70 years old and this reminds me of the times that I was my dad’s helper when he performed maintenance on the family vehicles. He also taught me patience. When the going gets tough, walk away. Cool down and go over everything in a methodical way. Eventually the “light bulb” will come on and you will realize your error and correct it. No harm, no foul. We need more automotive machine shops and repairers like you - honest and truthful!

@CarlWestcott-ou7gp

5 ай бұрын

I like it good show I am a retired mechanic 😊😊

@maddawgnoll

4 ай бұрын

Probably one of the hardest things to overcome is that frustration. Walking away from the job to collect oneself is very hard to do. I try my best to do so, but occasionally I become too stubborn for my own damn good. But, I'm learning. That step back to recollect is truly beneficial

@Rwalt61

4 ай бұрын

I was my dad's helper too. Where I learned the art of rebuilding carburetors.

@Joe-hu7di

Ай бұрын

@@maddawgnoll I am an elevator mechanic. I tell the young guys and have to remind myself when we are troubleshooting a couple of hours to walk away. Fixed more jobs 5 minutes after coming back than than I could count.

When I was young and didn't know any better, I pressed them out, pressed them in, bent the yokes and broke my drive shaft in about 2 weeks, bought a used one and replaced it. I've come a long way, and I give a lot of credit to the old timers who still take the time to show the willing how to do it right the first time❤

@MarkShinnick

4 ай бұрын

Well said:)

@OtherDalfite

3 ай бұрын

Really easy to fuck them up with a press. I don't know why people say to use them. Hammer and sockets or this way is superior. Presses suck

I've had to replace U-joints many times over the yrs being a tech and this is the best tutorial I've ever seen 👍. Unfortunately every shop I've worked at never had the luxury of a blast cabinet, and some didn't even provide a torch setup.

Dave you are an awesome teacher. Straight to the point and clearly demonstrated. I just found your channel and it’s becoming one of my favorites.

@strykerentllc

6 ай бұрын

Tiger Tool has entered the chat...😑

@Rscmgw23

6 ай бұрын

@@strykerentllc… that one went right over my head. What is a tiger tool?

@strykerentllc

6 ай бұрын

@@Rscmgw23 Google not work? A search for Tiger Tool would have revealed to you that it's a company who manufactures and offers tools. One of which removes universal joints with ease. The real bonus is they make another tool that presses them as well, without having to use a vise or calling on another set of hands, taking those hands away from making money on another customer's vehicle. A heat gun melts the polymer out of the newer OEM joints without running the risk of annealing the yoke as is the case with a cutting torch. He's teaching alright but the level of knowledge he shares falls short. Seeing another one of his videos where he's doing a 1 ton RAM front pinion bearing on a 14-9.25 AAM axle is another example where he didn't do a proper install when he set the pinion preload torque to 70 in/lbs. when the max is 25 in/lbs.. Cheers!

First time I did u-joints I dropped a couple of needle bearings when I used a hammer to drive in the joint. Now I use the vice for all of it. Love all the videos.

I am doing all three on my RAM 2-piece driveshaft now. I got the Moog grease-able joints. I initially replaced the carrier bearing only, because it was shot. U-joints seemed OK. But after installing the shaft in the truck, there was bad vibration at 50 MPH and up. So, replacing all the U-joints now. The factory U-joints were a bear to remove. All the clips broke and were tough to remove. Used BIG NASTY and a chisel tool to break the clips into small pieces. I have a DAKE 25 Ton press, but I was worried about bending the yokes. The driveshaft is 20+ years old and has plenty of rust. I ended up cutting the U-joints out with a 3" cut off wheel and my die grinder. Then I pressed out the cups. Cleaned and de-burred the yokes and basically did what Dave did in his video here. Thanks Dave!

Damn... This man is worth his weight in Gold. His knowledge and techniques as well as patience are all next level. I wish we could all have leaders like this in all of our lives.

@user-uj3zk2cx8t

8 ай бұрын

He's using a vice to change ujoints. Not reinventing the wheel. You people will worship anyone

@bustjanzupan1074

6 ай бұрын

@@user-uj3zk2cx8t Yes, but he is still doing it quite good.

@terryhill4732

6 ай бұрын

​@@user-uj3zk2cx8tyes it was pretty simple if you've done it before but several people are looking for leaders now because they aren't skilled at nothing that's why so many join cults and worship false prophets which this mechanic is not by repairing a U- joint

@Corvacar

29 күн бұрын

Most of the time so never had a helper. It makes an immense difference in ease and time of installing. Fergieman

A hammer & a couple of sockets is all I know

@toddgittins5692

9 ай бұрын

Crude

@georgecarry6023

9 ай бұрын

😊😊😊

@jonb7470

9 ай бұрын

Much quicker too

@built4speed305

9 ай бұрын

You've never picked up a hammer in your life except that plastic toy set from hasbro when you were 8👉🎯✌️

@timothykappel198

9 ай бұрын

Definitely not beating these out without heat or a press.

Guys who are trying to learn the trade of. fixing cars should watch ALL of Dave's videos. He explains things very well. I had to teach my self how to do U-joints. No one taught this at the automotive school that I attended.

@bobwilson758

3 ай бұрын

Huh ? Really - dang . That’s not right / teaching is a skill in itself !

Scotty Kilmer watches Dave's channel to learn how to do the job right. When I'm done watching Dave's videos, I don't have a headache. If I watch a Scotty video, I need an aspirin afterwards.

@TheRethuglicanOfficial

3 ай бұрын

No one Inside a library Scotty kilmer: REV UP YOUR ENGINES

@garreysellars5525

21 күн бұрын

I agree Scotty is a bit too animated

You're a great teacher. I worked as a Transmission R & R tech and I can say it can be a tricky operation. Great work. Great video too man. You don't talk like an info-mercial salesman. I want to start a Firestone super center here in Vermont. It's tough to find 100% Auto Service like they provide.

@DavesAutoCenterCenterville

8 ай бұрын

Thanks 👍

@DavesAutoCenterCenterville

8 ай бұрын

Best of luck in your business ventures. Thanks for watching.

Great to watch the right way to install u-joints and that is one nice vice. I was taught to always mark the yoke and put it back the same way as they are balanced as a unit.

I use a side grinder and cut the shafts. A socket and punch out the caps. Clean it up real good and then use a large c clamp to press and do the same job. This however is the best method for shop replacements I've witnessed. Good job!

Just to add. Mark the slip yoke so it goes back in same line as it came off to keep it in balance. I was taught to use a wheel cylinder hone to clean up the cup bores. We always pushed the cup in further so u-joint got better grab on other side cup when pressing it in. Great video.

@eurbanautotech

4 күн бұрын

@WhiteKnight5775 Ya, I push the cup in further too. I find it makes it so much easier. I use the Snap-on balljoint press kit to do them. Most shops I've been at either haven't had a good vice or had it attached to a tiny table against a wall.

I’ve done many of them through the years. It’s nice to watch someone care about someone else’s vehicle as if it were their own!

I haven't done a u joint in 30 years, thanks for the refresher!

Watching these videos is like food for my soul. As a technician who prides my self on quality workman ship I can't stop watching. Great example Dave is for the industry, especially in today's times.

Dave is the last of real men doing real men work! ❤

I love the way you describe and teach as you go ❤😅

@built4speed305

9 ай бұрын

He is indeed THOROUGH

I remember when i was young mechanic, 16 or 17, i bought a 54 chev 3/4 ton and i was having a hard time changimg the u joints and i asked my father for help and with a hammer and old piece of railroadtrack and in less than 5 minutes he had them changed, pissed me off because i thought i should be able to do it as good as him but that was a good learning day lol. Thats a different job than whats' Dave is doing in the video. Nice to see father/son videos also

Thanks, Dave. Very similar to how I was taught some 55 years ago, except for the heat. That you applied the pressure with the hammer to the cross, or spider, was how I was taught except we didn't have such air tools in the workshop then. May I suggest that you mark the slip yoke and the shaft so they go back in the same line. I'm retired now but I recently came across a you tube series by Professor John Kelly of Weber University Automotive Section on U joints. It was very enlightening. went into measuring axial play and the potential for that to cause vibration. Very well worth a look, particularly sections about 5, 6 and 7.

Nice vid, but... You forgot to mention to rock the new joint on a flat surface checking to see if one set of cups are bigger than the other (Yes, there are some like that). Also, when you're finished and checking the new joint for smooth operation. In the event the joint is tight (you'll feel it), you need to relieve some stress that's held in the yoke. I keep an old chisel that's been ground flat and strike the ears of the yoke where the joint is tight. Works like a charm. Finally, I'd avoid heating the ears of the yoke to the point where they're glowing. You're changing the grain structure of the steel at that point.

@djnone8137

7 ай бұрын

It was too hot My stepdad did it this way. Ase master mechanic 30 years but never got em this hot

@mr2_mike

4 ай бұрын

Use calipers to check size. More exact, if you don't know the vehicle you're working on. I also would be cutting the old one out. Then cleaning rust lol.

@clanehoss

4 ай бұрын

Gfys guy

What you guys do is infinitely interesting. I’ve never been around this stuff and I appreciate the work that you guys do. New subscriber! Please keep the education coming!

This is awesome info, Dave. Thanks for the willingness to share the wisdom. You and your guys make the world a better place.

I remember heating up the GM Ujoints that had the nylon the held the caps in. Always made a nice loud POP and you made sure no one was in line of the cap as they shot out of the yoke

Great video, Dave. Auto Shop basics 101 (1958, freshman year in high school). In this day and age of electronics, the young guys forget the basics.

After watching your vedios i reckon havnt studied anything in 2 years of my diploma of automotive. Iam learning from the beginning while watching your vedios .. thanks for that.

Dave is an incredible teacher, SO much detail. I strive to be as good of a teacher to my apprentices, as Dave is.

I could watch this all day long - I’d love to see longer videos on rebuilds maybe split into 3 videos

Patience, cleanliness, and teamwork. Nicely done

So many new mechanics don't even know how to change joints anymore. At the machine shop i work at, we use a cut off disc, does well enough to remove the old one and we use the same method of putting a new joint in, with a socket and vice.

You took me down a personal history road I did that job on a small (1970s) British car. Since the joints already came with C-clips I just used the bench vise my dad had to push one end out using≠ size sockets. I remember how tricky the needle bearings were, but I did not screw up. I did not know modern cars still had the room for installing u joints with c clips Dad had a bit of tools; he was a milling machine operator (miss u 😢) Really nice job

I like how you did one completely in first, when I do u-joints I’ve always done both at the same time and it’s hard to get the shaft in the needles perfect, can’t wait to try it next time

That's a neoprene retaining clip that injected from the factory if you had heated it more it would've squirmed out of those holes and they would come out easy as pie

Listening to you is a joy. Thanks for the tutorial.

I love watching daves videos on youtube and tik tok. He is such a good mechanic and boss! I wish i could work for him. Very well spoken and does such a good job explaining. Seems like he has alot of patience too. Love the videos!!

I’ve always wondered how to replace a u joint. Thanks dave for a step by step done the right way. 👍😁

This is a really great educational video. I'm retired now, but over the years I've busted many a knuckle changing those without a vice or press. And sometimes on the roadside too, and in the middle of the night.

@Outdoorsy368

6 ай бұрын

Oh yea me too also it's gotta be colder than a well diggers a## too!!

Great video on how to! Also, good details! I've changed several u joints. The worst one was on a pick up all the needle bearings were gone, and a third of the trunnions were worn off.

Dave, you're a top-notch professional!

Man that was intense! Great job as always.

Congratulations on your new TV show coming up. It's nice to see hard work paying off. Be watching all of your new shows. Thanks for putting wholesome back on TV!

By the power of Dave I can change a U joint now! Thank you sir! Keep it up!

Yes,I did that to a 2 piece tailshaft for my car last week, they're a bit more difficult to do by yourself although I found out that I can rest the rear shaft in the vice while I press the cups into the yoke while moving the trunnion around. I also mark the shaft even on a tailshaft which has a universal joint on both ends before pulling it apart,I had to mark the mounting ears on mine because both halves are phased 180° apart, it's so that the shaft won't likely vibrate in either case. I wrap the caps with electrical tape because I like to keep each cap on their trunnion that they came off originally. I recently had a Guibo which looked alright cause vibration (it was warped) in second gear from the time that the Guibo was brand new so I slipped a spare used Guibo into my car last night & early this morning I drove it & the vibration went away !

Great videos Dave. Your showing people good honorable work. Love it

Dave, I'll disagree with you on the greasable joint preference, and especially to one with a zerk in a cap as opposed to in the cross. though I would love to hear your response. My reasoning is because I regularly see factory sealed joints hit well over 200K KM on work trucks up here in central BC, Canada, but greasable aftermarket replacements from Moog, SKF, etc. are usually doing very well if they can beat 60K. Compare a factory Spicer joint on a Dodge front axle etc. with a Moog, and it's easy to see that the Moog seals are trash in comparison - and they have to be, to allow grease to purge out. And once those seals have opened to purge, they let water in more easily also, so they NEED to be re-greased very regularly, whereas a sealed joint needs no attention for years. For highway trucks, probably not such an issue, but a large amount of my workload is 1 ton service trucks that live very hard lives coated in mud down bush roads, on ranches, in pit mines, and such, and the aftermarket joints just don't hold up. Having said all this, I've only been doing this for a little over a dozen years in comparison to your career, so I'm always open to opinions.

@thedude828-ed2nn

Ай бұрын

I agree with you i think moogs are trash i had factory spicer on mine it was great. I ended up putting a new rear end on my truck but long story short my pinion flange was a 4 bolt and the new rear end was 6 bolt so i found a u joint conversion yoke for 6 bolt and had to take the u joint of but the conversion piece added a inch and a half to my driveshaft so it was a waist of time and i ended up just changing the pinion flange to a 4 bolt. I tried out a moog u joint it was garbage so i needed my truck to drive to work and i couldn't get a spicer u joint in time so i did end up getting a Napa u joint that has worked so far but i learned just because its greasable doesn't mean its good id go with the factory spicer any day of the week.

@garreysellars5525

21 күн бұрын

My dodge original non grrasable only lasted 50 Thousand Ks Fitted grrasable using Wynn's grease now have 307thousand On the clock Maybe service maintenance is key

Great mechanic, smart businessman, and a nice guy! Thx Dave

Nice to see that.Its been years since I have had to do that. Nice refresher👍

Best U-Joint video on the internet - Awesome and thanks for the lesson!!!

Dave I got to tell man that I love to watch your videos you are the boss and you are working hard. Keep it up man.

Just done mine on my jcb loadall, thanks for your advice n help dave !

Good info. My only gripe was the vise, I was told to never put a driveshaft or yoke in a vise. It might have been an abundance of caution as I was a beginner, but I have always followed that advice.

@crackpotfox

5 ай бұрын

Really the best way is to use a press and press the cups out and in. A vice works fine, but isn't really ideal.

@markcollard9326

5 ай бұрын

I bought a 6 ton press from harbor freight, it has paidfor itself numerous times already. It paid for itself on the first job I used it on, replacing every single suspension bushing on my son's 95 Del sol. I would recommend one for any shadetree mechanic that has the space for it. Have a great day.@@crackpotfox

I've done tons of u joints when I was a tech for chrysler, I'm still a big fan of my u joint press.

🔥usually heat till plastic comes out those factory holes, looker pins in there. Usually Center push mark in shaft and Knuckle for reassembly, had them 1/2 rotation out and bad vibration 🔥👊🔥🏍🔨⚙️really enjoy your videos and how killer your shop Is

@DL101ca

9 ай бұрын

I always mark them too, so they go back the same way.

@jeremymullen5378

9 ай бұрын

@@DL101ca I said that, mark both ends up a Center punch

@johnhoops3531

8 ай бұрын

@@jeremymullen5378 uh or yellow tire crayon.

@jcanfixall1585

3 ай бұрын

I think those joints have been changed in the past because the nylon seal didn't squirt out, also only an idiot would get them red hot...

I didn't have a vise years ago, but I did have a huge c-clamp that worked. A little wonky at first, but I was able to manage. Great video!

First year apprentice here who’s only just learning to replace uni joints. Thanks for this great video!

Man you put in a lot more effort than most on these u joints. It refreshing.

Using a cold chisel, mark the mating inney and outey yoke parts. One strike on each side of one pair, two strikes on the other pair on the other U-joint. Heat up slightly the end tube of grease gun, torch, sun or oven and inject warm grease into Zerk to reveal at seals while still on the bench while working the joint. Purge the air in the internal grease passages. Always grease while U-joists are warm from driving and after mud-stuck. Grease joints and chain saw bar tips while hot/warm before storage. Push out the water and grit so it doesn't sit in there and rust then bind when cold start up.

Good job! I do my farm equipment joints the same way except I add a little high quality grease in each cup to insure the needle bearings stay in place. Really like your vids!

Dave and crew, you have a proper shop and a top notch workplace God 🙌 bless

Great KZread Channel , like your work ethic and Honesty .

Glad to see you still do this..someone told me they just replace the shaft..

That's exactly how you do it. You're a very good teacher .

A great teaching and informative video that all of us can benefit from, thanks for sharing!

Love ya work Dave!

An old ER doc here, these are what we call the pearls of wisdom, from a multitude years of experience.

Really nice demonstration.

I'm an Automotive Student andI learned alot from this guy. I also love the fact that he is no BS type of a guy and make things even better.🎉🎉🎉🎉

'An element of risk...' yeah I can relate to that, a familiar feeling as I've replaced many universal joints on my British Clasics over the last 45 years. Great video!

Love this channel more and more

You makeit look easy, Dave! Great demonstration!

Thank you, Dave for an excellent tutorial

Great information, thank you for your in sharing. Keep the info coming

Back in the day, I don’t remember the exact years, some u-joints had plastic injected that surrounded the caps. That is the only ones I used heat on, unless it was absolutely necessary. I’ve changed a ton of them with a hammer and brass drift.

For getting them back in, I use a C-clamp and sockets. I used a hammer at first but that knocked the needle bearings out of place and I crushed them until they broke. I used a needle from the old U-joint. I learned to keep some old needles around as well.

Add a little grease to your needle bearings. This will assist holding the needles in the cup. Great channel!!

Great job Dave & Joey!🤩🤩

Awesome ! ,Now I figured how the u joints are put together !

Basics are fundamental! Love it!

Thank you for sharing, Dave and Joey; and the camera side too.

When Dave performs his magic tricks it educates his audience by teaching them the complexity involved in learning to become a wizard. Not a job, a highly involved profession. Dave clearly demonstrates his commitment to the highest level of professionalism.

Awesome workshop, you should be very proud.

Dave your shop is literally equipped to fix ANYTHING. Love the videos man.

Love this channel!

Always enjoy Watching a Master Mechanic

That vice tap trick is a great example of experience.

Thanks for the step by step. In my younger days I broke the yoke on a big Buick. The junkyard had all you can carry for $25. No guarantee. I carried 3. The ones I didn't use we threw in the dumpster. The part going into the transmission was about one inch shorter but works. I asked if it didn't work could I trade it for another " no refund" so I carried three

Missed you mention marking joint so to put it back in , in the right orientation , love your down to earth approach

Great tutorial.....Most times i just use the vise to hold it and use a ball joint press to do the work. Have never had a sand blaster or anything, just some emery cloth...

Damn, what an amazing vise you’ve got there, love it. Amazing tutorial btw, your shop is amazing 👍🏻

Very good. I replaced the u joints on my Jeep Wrangler front axles same way.

Basic mechanic tasks explained in depth. Thank you.

You’re a great teacher man

Great training! Interesting how there's two different style clips.

Thanks - son = a thousand & 87 Dollars ! No foolin’ - you fellers stay good ! Team work is Good /fun work ! You are living your lives ! I would have enjoyed working your shop sir !

a lot of great information!! thanks for the video!

Good video! Good camera work! Nice & thorough T.Y.

It’s too bad I didn’t watch this video earlier. I did it with a hammer and deep socket Thank you for sharing. Have a good day 👍

I did a few of these. I used a C clamp do to the job. I have a Chevy to do next. I love your videos.

You do great work I am 33 years old right now and hope to be as good as you some day and have a shop like yours