Replacing a bicycle drivetrain. Bike frame cracked. Unpredictable end
Ғылым және технология
In our bicycle workshop, today we have a mtb bike with the task of changing the drivetrain.
I will show you the main signs when you should replace the drivetrain on your bike.
How to accurately diagnose a bicycle chain for wear and stretching.
You will see how you can determine that a bicycle cassette has already exhausted its service life.
On the client's bicycle, we will change: the cassette, chain, bike cranks, and we will also need to replace the bicycle bottom bracket.
The bike bottom bracket also requires replacement, as it makes additional noise when rotating.
New bike cranks have a different seating depth during installation.
At the very end, there will be a moment unexpected for me)
Bicycle frame to be replaced)
A video that relies on technical sounds rather than speech. Language-neutral; designed for international audiences. Presented as a DIY tutorial.
Those who are into bicycles will find this video a treat.
00:00 How do you know when it's time to replace the drivetrain?
00:38 How to check the tension of a bicycle chain.
01:17 How to determine the wear of a bicycle cassette.
01:42 Bicycle cassette wear measuring tool.
02:42 How to change a bicycle cassette.
03:54 Installing a new cassette on a bicycle.
04:21 How to remove an old bicycle chain.
04:52 Unpacking a new 8-speed bicycle chain.
05:49 How to determine the elongation of a bicycle chain without a special tool.
06:23 How to quickly remove bicycle pedals.
06:51 How to quickly remove bicycle cranks.
07:40 How to choose the right bottom bracket for new bike cranks.
08:51 How to quickly remove the bike bottom bracket.
10:29 How to choose a new bike bottom bracket according to the frame size.
11:09 Unboxing the new bike bottom bracket shimano.
11:32 How to clean a bicycle frame in the area of the bike bottom bracket threads.
12:15 Bike frame cracked.
Share this video with your friends,
it will help the development of the channel! 📈😘
Пікірлер: 93
If you liked this video, share this video with your friends ❤ it will help the development of the channel! 📈 Thank you for your comment! 😍
That heartbreak(revelation) at the end.
@NiceBikeService
4 ай бұрын
Thank you for your feedback! 😘
@Sustrii
3 ай бұрын
That is why the first to do is a full clean and then a visual inspection.
スプロケット測定ツールが存在することはじめて知りました😮 このチャンネルはとても勉強になりますサンキュー😄
@NiceBikeService
4 ай бұрын
コメントありがとうございます！😍 このビデオが気に入ったら ❤️ このビデオをお友達とシェアしてください。 それがチャンネルの発展に役立ちます！📈
I've been using an XT M770 HollowTek 2 crank with the original large and middle chainrings since 2008. I have also been using an XTR M970 9spd. cassette with the 4 L cogs being made from 6/4 Titanium since 2011.
@NiceBikeService
4 ай бұрын
In those years, the quality of the components was much higher, one could say that they were "eternal"
_Nice Video, schönes Video._
die tandenborstel is echt goed gevonden :D
@NiceBikeService
4 ай бұрын
Echt heel handig
Therapy👏👏
@NiceBikeService
4 ай бұрын
😺💁❤️
Pressing F for that frame... :/ I could see the original BB you remove didn't even had a seal... My GF bike came with the same style of BB, 1 rainy ride and it was done. Good job! Will you record the new frame build?
@NiceBikeService
4 ай бұрын
Thank you for your comment. If the owner of the bike receives it and brings it to our workshop, we will make a video
Ótimo trabalho
@NiceBikeService
4 ай бұрын
Obrigado pelo teu comentário! 😍 se gostaste deste vídeo, partilhe este vídeo com os seus amigos ❤️ isso ajudará no desenvolvimento do canal! 📈
Merci .
@NiceBikeService
4 ай бұрын
😽❤️
Great video as always bro. I have one question though, i was servicing my bearings because they sounded gritty and needed to be regreased and when i was done, i was just gonna tighten my wheel axle bolts to how they were when the axle broke. (The hollow part where the quick release goes into)Is it replaceable or do i need a new hub? I dont want to spend any more than i need to. My hub isnt a freehub its just a standard hub for a freewheel. Thanks in advance and keep up the great work.
@NiceBikeService
4 ай бұрын
Thank you for your comment. Yes, the pole can be replaced separately from the hub, the main thing is to find the same one of the same diameter and length
@natanaeltzul1-248
4 ай бұрын
@@NiceBikeService thanks alot
Men sizni vedyolaringizni topganimdan xursandman
@NiceBikeService
3 ай бұрын
foydali bo'lishidan xursandman! fikr-mulohazangiz uchun rahmat! 😘
how does that cassette checker works ? how to use it ? is it possible to use new chain instead of that tool ?
@NiceBikeService
4 ай бұрын
If the teeth of the cassette are new, the links of the meter will fit perfectly on the teeth. If the cassette teeth are worn, the distance between them becomes larger and the last link will not align with the tooth when pulled. If the teeth of the cassette are worn out, there is no point in installing a new chain, as it will slip. You need to change the entire transmission or roll it on the old chain
之前我问过您更换刹车的问题，您推荐shimano mt200。我听从您的建议，已经将它更换到我的自行车上，性价比很高的刹车（一个月前我在测试这款刹车由于捏的太紧我摔倒了，手上的伤到现在还在痛😂） 我还想再问您一个问题，我的来令片呈八字形，也就是上窄下宽的形态。上面窄的部分会蹭到碟片我该如何去调整它？ 感谢您的回复😊
@NiceBikeService
3 ай бұрын
感谢您的反馈。翻译器翻译得不好，所以我可能无法正确回答您的问题。 如果制动盘与制动片刮擦，请尝试用钳子或专用工具将其弯曲。最重要的是要稍微弯曲一点，以免弯曲得更厉害🐱。
@cqwx1574
3 ай бұрын
@@NiceBikeService Thanks for your answer! Brake pads may be called different in different countries. Our country (China) calls brake pads "Lai Ling pads", which is the brake pads (brake pads) you said, so it is not your translator that has a problem, but my problem, sorry. I revised my question so that you might understand The solution you mentioned seems to be the solution to the brake pad (disc) deflection, but it is not this problem. My brake pads is a figure eight, which means it's narrow at the top and wide at the bottom. The narrow part on the top will rub against the disc. How do I adjust it?
@NiceBikeService
3 ай бұрын
The pads may wear unevenly. In such cases, remove the pads and make them flat with a file or grinding wheel. If you don't have any tools at all, you can even grind them on a rock or concrete, which is sometimes done when travelling. After this procedure, there will be no problems with the settings
@DiversidadeVisual
2 ай бұрын
Até nos automóveis, fazemos esse procedimento de adequar a pastilha ao disco. Uma readaptação! Ótima pergunta, ótima resposta!
It's time for welding work to save the frame
@NiceBikeService
4 ай бұрын
There is a chance to change the frame in the store under warranty
@statom985
4 ай бұрын
so its the new frame that broke already ? carbon ?@@NiceBikeService
@sebastian-FX357Z1
3 ай бұрын
The frame looks like it's from the cannondale trail series, aluminium hardtail frame. Not all cannondale frames have lifetime warranty, so u better check out it first before buying it.
Радует качество монтажа и эстетика работы у канала. Интересно что с делал владелец на велике раз убил раму. p.s Слава Украине
@Jdk5
4 ай бұрын
Я думаю нічого не робив такого, бо виглядає чистий і охайний, ніби то дівчина їздить, просто від старостітріснула, алю рами мають таке. Героям Слава
@NiceBikeService
4 ай бұрын
такі штуки вилазять, коли на раму збоку тиснуть (на пірья) без колеса. та все може бути, брак також.... Героям Слава✊💙
Bevor man am Fahrad irgentwas macht kontroliert man es auf Schäden um sowas zu verhinden.
@NiceBikeService
3 ай бұрын
Vielen Dank für Ihr Feedback! 😘
So is the frame warrantied or is it scrap this bike and buy a new bike?
@NiceBikeService
4 ай бұрын
Yes, the manufacturer gives a lifetime warranty on the frame for the first owner of the bike, of course, if he or she has complied with the operating conditions of the bike
Tu mesures 73x123 sur l ancien boîtier de pédalier et tu prends ensuite un 73x118 pour le remplacer ?... Beh heureusement que le cadre était cassé, sinon il y aurait eu des problèmes d'alignement et de frottement des manivelles sur les bases...
@NiceBikeService
3 ай бұрын
Je vous remercie pour votre commentaire. Vous êtes très attentif😺
@laika436
3 ай бұрын
@@NiceBikeService , de rien, c est juste que je ne comprenais pas pourquoi 118 alors que je venais de lire 123 juste avant sur l instrument de mesure... Rien de grave, bonne continuation 🙂
Vai ter que substituir o quadro mesmo?
@NiceBikeService
3 ай бұрын
O proprietário da bicicleta tentará substituir o quadro ao abrigo da garantia
is it a proper way to measure chain wear ?
@NiceBikeService
4 ай бұрын
This circuit measuring tool is quite accurate. But, for example, Campagnola antsugts have slightly different gaps, so the measurement on them will not be accurate
thats wy i check first the frame from the bike before i repair it
@NiceBikeService
3 ай бұрын
Thank you for your comment. Yes, you are right, but such cracks are not always easy to find
@SolidxSnakexDuke
3 ай бұрын
@@NiceBikeService no not realy i see that wen i check the frame first on important coners
Хеппі енд😂 якщо купляв в офіційному магазині то нову раму дадуть, або взагалі новий ровер. А я що ні? то буде відео як зварювати аргоном 😂🎉
@NiceBikeService
4 ай бұрын
Не знаю, як зараз, а до повномаштабного вторгнення міняли, хоча доводилося деякий час чекати.
ありがとう？！
@NiceBikeService
4 ай бұрын
お役に立ててうれしいです！ご意見ありがとうございます😻
comme quoi la marque ca veut rien dire ,moi je me suis monté un full carbone aliexpress que je torture depuis presque 3 ans et au moins 20 000 klm et il est toujours en forme cadre,roues,tige de selle ,selle , potence, guidon etc 😁 c'est un alu ou un acier ?? il a fait quoi le client ??
@NiceBikeService
4 ай бұрын
Au cours de plusieurs années d'exploitation de l'atelier, nous avons rencontré plus d'une fois des fissures sur des cadres en aluminium, quelle que soit la marque du fabricant, il arrive parfois qu'il y ait un défaut. Pour une raison quelconque, ces cadres ont des endroits plutôt faibles où se trouvent des joints soudés. Le propriétaire du vélo tentera de changer le cadre sous garantie
Assalomu alaykum .men urta osyodanman aniqroĝi Uzbekistondanman.quygan vedyolaringizni kuzatishni boshladim.men ham velo ustachiligini qilyapman faqat menda bunaqa sharoyitdagi ustaxona yuq.bu natijalarga necha yilda erishdingiz.google jarjimon orqale õqishingizni umidqilaman.ishlaringizga omad tilayman
@NiceBikeService
3 ай бұрын
Fikringiz uchun rahmat, Ukrainadan salomlar. Bizning ustaxonamiz taxminan 8 yil oldin ish boshlagan, kanalga esa 1 yildan sal ko'p bo'ldi
R.I.P the frame.
@NiceBikeService
3 ай бұрын
😿
Czy się spawa takie pęknięte ramy?
@NiceBikeService
2 ай бұрын
Nie, nie spawamy. Istnieje możliwość wymiany tej ramy w ramach gwarancji
👏😅 👍
@NiceBikeService
4 ай бұрын
😺
8:45 für rechts Gewinde benutzt du wohl andere. 😅 !? ..dies mal verschont 🤕 oder?
Find someone who can Tig Weld and jobs a good 'n .
@NiceBikeService
4 ай бұрын
We hope that the customer will be able to replace this frame under warranty
Did the customer know about it? Lol???
@NiceBikeService
4 ай бұрын
He, like us, did not know about it
This frame is gone!
@NiceBikeService
4 ай бұрын
😉
Cog ?
@NiceBikeService
4 ай бұрын
What?
Y ahora?
@NiceBikeService
4 ай бұрын
new frame )
@jrclad2964
4 ай бұрын
Un cordón de soldadura si es aluminio o acero, y quiere conservar la bici.
the end is not happy
@NiceBikeService
4 ай бұрын
😿
ひととうりやってもフレームが割れてれば全て無駄
@NiceBikeService
4 ай бұрын
残念なことに、私たちはその亀裂にもっと早く気づかなかった
チェーンガイドで 割れてる部分見えなかったから 判らなかったんでしょうね・・・ アルミフレーム？では ここが割れる事は珍しいのかな ヘッド周りの方が多いような
@NiceBikeService
4 ай бұрын
最も興味深いのは、これが同じオーナーによる2つ目のひび割れフレームだということだ。
@kszyfnik
4 ай бұрын
Właściciel tego rowerka musi być zdolny
@user-vm9no7fu2b
4 ай бұрын
このオーナーの ペダリングに凄く癖があるか 同じ衝撃要因で フレーム壊してるか？？？ ２０年以上前のフレームなので 経年劣化？？
@NiceBikeService
4 ай бұрын
車での運搬方法を間違えて、バイクを傷つけてしまったのかもしれない。フレームはかなり新しかった。
WAY TO MUCH TALKING IN THIS VIDEO SKIP IT
@NiceBikeService
3 ай бұрын
That's right, talk is the minimum. More action.)
thumbs down :-((
@NiceBikeService
3 ай бұрын
😿
Fajne masz te przyrządy :)
@NiceBikeService
4 ай бұрын
dziękuję za komentarz 😍