Hi Paolo, I just sent you an email asking you for the adjustment program for my XP-800. I took apart the printer, replaced the ink absorb er, put the printer back together following your step by step instructions on the video. I could have NEVER done it without your GREAT easy to follow video. Thank you so much!!

Just replaced the waste ink absorber assembly (purchased from Amazon). Thank you! I could not have done it without your excellent tutorial!

@PaoloMarcelli

4 жыл бұрын

Thank you for your kind support!

Instructions were accurate and easy to follow. It took me less than 15 minutes to complete the swap. Thanks, Joe.

@twinvisionphoto

2 жыл бұрын

ho joe did you have to use a reset key? and if so where did you get it from?

Thank you Paulo, brilliant video. I have an Epson XP-760 and your instructions worked perfectly. I bought an Epson adjustment disc on-line for my XP-760 first, which worked flawlessly resetting the inkpad counter (the free versions would not work for this printer). Once that was successful completed, I then following your instructions to get to the inkpads. Just a thought for anyone to do with cleaning the inkpads. Like you, I washed mine, as you described and gently squeezed them to get the final amount of ink out. But then, I put them back into clean water and let them swell up with water again. Without further squeezing, I pulled them out of the bowl (dripping away!) and carefully spread them out on wads of newspaper to drain and sun-dry. (It is unusually very hot today in the UK, it took no time at all!) After drying, (unlike yours) they were “plump”, with (like yours), a small amount of discolour, but other than that almost like new, plump such that they filled the ink pad container almost as before! I did not bother to use any other chemical cleaners as I surmised that they were good enough to go back in. Without your video, looking at your flattened pads, I would not have thought to not squeeze the water out. It probably makes no difference as they would no doubt soon swell up with waste ink anyway!

you're a great one! I tried the procedure on an Epson XP-850 setting the compatibility of the 2 programs on Windows XP. The only thing different from your video is that I had to select both the options in the "Check & Initialization" menu, ie "Main pad counter" and "Platen pad counter" because otherwise the latter was not reset. Thank you!

Thanks for sharing this, so kind of you. Super simple instructions. printer fixed and looking forward to many more years of printing. Keep up the good work.

Thanks for doing this , I almost binned it until I saw your tutorial I really didn’t want to replace it as it’s the best printer I’ve ever had, again many thanks.

Excellent video. had my Epson XP 700 a while now so expecting to get a waste tank full message soon. Your english is great. Thanks

Thanks for such a helpful video. I used this to find the ink pads in an Epson XP-605 printer. Not as simple as other printers I've rescued,but still fairly accessible with just a screwdriver. The software I used (WIC Reset, costs £5 per key) informed me that the main pad was at 100.99%, no wonder why it failed.

Excellent and easy to follow tutorial. Paolo was super helpful when i got stuck as I hadnt read the comment about emailing him for the program. He was a star and everything ended well with a working printer. Thank you.

@mikedavenport007

3 жыл бұрын

how do I find the email address for the programe

@twinvisionphoto

2 жыл бұрын

​@@mikedavenport007 hi did you have to use a reset key? and if so where did you get it from?

@mikedavenport007

2 жыл бұрын

@@twinvisionphoto never did get programme. Just put ciss replacement ink and it's been ok if ink states low just top up.

@twinvisionphoto

2 жыл бұрын

@@mikedavenport007 thank you but i have cleaned waste ink filter and i have to reset counter otherwise printer will not work i need to rest counter with reset key

Very informative. My 850 printer works perfectly but needed cleaning. it was leaving black streaks on printouts. I didn't want to throw the printer away because it is a great little (slow) printer. Thank you so much for taking the time to make this video. Your English is great too.

Awesome - I had the hardest time trying to figure out how to access the waste ink pads and your video was a great tutorial! My fingers are black right now, but as long as the printer works, I can deal with it. :)

Thank you so much - this video was really clear and helpful, and the process worked perfectly for my XP-540. Much appreciated!

@PaoloMarcelli

3 жыл бұрын

Great job for fixing your printer, and thank you for watching.

Great video, saved me buying a new printer! Thanks

Grazie mille! Sei stato utilissimo :)! Per chi leggesse, funziona anche con la XP-530.

Excellent. Easier than I feared.

A very good video, thank you for taking your time, and explaining carefully. cheers from sweden

@PaoloMarcelli

6 жыл бұрын

I'm happy that you found it useful and you appreciated it! Cheers from Italy ;)

Another excellent reset video my Friend!!!!keep them coming!

Perfectly working also with my Epson XP600. Thankyou!

Great step by step video. Inkpads removed and cleaned in less than 30 mins. I've just emailed you regarding the next step of resetting the counter and where to find the software needed. Many thanks - one happy new subscriber!

@carlosarios

3 жыл бұрын

Any answer?

Absolutely awesome! I ordered a new ink reservoir with ink pads after I watched this video, from Amazon. If I can do this, you can do this. Just watch step by step, it’s perfect! I did spend the $9.99 on the WIC reset program, which also worked great! Thank you, thank you! Fixed my printer for less then $30!

@dangerousdriving9227

4 жыл бұрын

Out of curiosity, what was the model/part number for the replacement in pad and where did you manage to purchase them from? Thanks.

@mjpeternel

4 жыл бұрын

@@dangerousdriving9227 This is what I purchased: www.amazon.com/Epson-Assembly-Shipped-XP-800-XP-810/dp/B07WWLS2WG/ref=sr_1_2?crid=2F3SZN98I5AV1&dchild=1&keywords=epson+xp-800+printer+ink+pad&qid=1587642670&sprefix=epson+printer+pads%2Caps%2C265&sr=8-2

Brilliant instructions Paulo. Many thanks. I have emailed you for a copy of the Epson reset program. Thank you.

Many thx for this tuto, it’s working perfectly on XP-700 ! 👌💯

I must say very through guide and nicely narrated, so well done!! :) I've got my waste tray out and have cleaned all the sponges with gloves. There was a hole in one glove, so I now have black finger but clean sponges :D

@PaoloMarcelli

3 жыл бұрын

Ink stained fingers are the sign of a printer technician in the early days :)

Excellent step by step video, good job!

@PaoloMarcelli

5 жыл бұрын

Thank youuu Paolo M.

Thanks a lot, Paolo! Now my XP-760 is working again!

@georgehales3064

4 жыл бұрын

how dod you get this to work for xp-760?

Fonctionne sur une XP 520! Tuto assez facile. Mr Marcelli est très réactif pour répondre aux mails. Grand Merci à lui.

@PaoloMarcelli

4 жыл бұрын

😊😊

@lescarottessontcuitesvraim243

4 жыл бұрын

Bonjour, avez-vous le logiciel disponible ? Pas de réponse ADCSFXworks... malheureusement. Merci de votre réponse

Extremely clear, thorough and helpful - thank you very much!

@PaoloMarcelli

5 жыл бұрын

Thank you for watching Jane :)

@janewhite5407

5 жыл бұрын

ADCSFXworks Your video is brilliant, I’ve now got my printer back together and am looking for the software to reset the counter. Please could you tell me if there is one you recommend, and if these are free or I should be paying, and also what the script you use is, and where I might find that? I hope you don’t mind me asking, I’ve tried searching but there are so many answers I don’t want to do the wrong thing! Thank you so much for your help.

Thanks for info saved me throwing out printer - would not have been able to fix without your video

@PaoloMarcelli

5 жыл бұрын

I'm very glad my video has been useful for you, thank you :)

Excellente vidéo ! 1 heure, et mon imprimante fonctionne à nouveau parfaitement ! Merci beaucoup !

@lescarottessontcuitesvraim243

4 жыл бұрын

Bonjour Jam, Ou trouver le logiciel ?

very useful and well made ! Thanks !

Thanks a lot for this! Excellent step-by-step instructions. I now have a working printer again!!!

Had been feeling a little nervous about doing this but, after watching this excellent step-by-step video, I feel assured that a mere mortal such as myself can do what needs to be done. Thanks 👏🏾👏🏽👏🏼

@PaoloMarcelli

4 жыл бұрын

Good job :)

@63artemisia63

4 жыл бұрын

Paolo Marcelli Did you get my email about resetting the counter? I hope you can tell me how ;o)

@PaoloMarcelli

4 жыл бұрын

@@63artemisia63 Unfortunately it's illegal to re-distribute these softwares, they are confidential! The safest way is to use WIC Reset, it's not free though, it's like 9.99$ for a single time reset I think!

@63artemisia63

4 жыл бұрын

Paolo Marcelli Thanks! I’ll look for it online. 👋

Thanks for clarifying. Sumptuously.

@brieflycake

6 жыл бұрын

It was certainly sumptuous

very useful , very detailed and clear

Hi Paolo. This video is perfect 👍. It’s work with my XP720. Thanks for all.

Great explanation & solution!

Super Anleitung, funktioniert auch beim XP-7100. Vielen Dank!

Merci, explications très claires. Je cherchais depuis très longtemps cette procédure. Nota : Utiliser des tournevis tète aimantée!

Bravissimo, ottimo video, perfetto,non manca nessun passaggio. Non comprendo chi ti dà 'non mi piace', più chiaro di così non potevi. Tamponi di inchiostro rimossi, lavati e asciugati. Ti seguirò magari per altri aiuti. Grazie mille ! (EPSON XP-810)

Thanks for the simple information on how to do it

Just followed your info, was able to get to the waste absorbers. My main issue was that the mini tank under the print head was not draining down to the storage absorbers. Used a needle plunger and forced liquid up the drain. Was able to clear the drain so the excess ink will now drain down to the storage absorbers. Thanks for the info and video. Did the trick.

@PaoloMarcelli

5 жыл бұрын

Thank you for watching :)

Thanks for a helpful video, I've managed to save the printer going to the recycling centre !

@PaoloMarcelli

4 жыл бұрын

That's the biggest reason why I make these videos :) Nice work.

Top quality video, to the point and well put together

@PaoloMarcelli

4 жыл бұрын

Thank you for watching, I'm glad you found the video useful :)

Thanks a lot, it's very useful and it works fine with my Epson XP-830.

@PaoloMarcelli

5 жыл бұрын

Thank you for watching c:

Great tutorial, thank you!

@PaoloMarcelli

5 жыл бұрын

Thank you for watching Olya :3

Excellent! very well explained.

You sir are a genius, excellent posting with detailed instructions Thank you.

@PaoloMarcelli

3 жыл бұрын

Thank you :3

Thank You very much. You explained it all very well.

Excellent very clear and so helpful.

Paolo, you're great! Thanks very much. I have an XP-620, but could use your very clear instruction very well!

@PaoloMarcelli

3 жыл бұрын

Thank you so much :)

@joukek

3 жыл бұрын

Plus you do it in such a sympathetic way! I was able to clean the pads. It was a dirty job, but I managed. Then the counter back. First a free trial to 80%

Thank you kindly sir, this worked PERFECTLY for me :)

@vincepratico2592

3 жыл бұрын

hi can you forward program thanks vp

This is superb. An outstanding example of how to make a good help video.

@PaoloMarcelli

3 жыл бұрын

Thank you so much :)

Excellent video, slightly different for my XP-960 but easy to follow, was going to buy a new printer, Thanks Paolo.

@PaoloMarcelli

4 жыл бұрын

Thank you :)

Great video, saved me buying a new printer, I got reset code on ebay for £6 from craft media shop

Very helpful. I'm absolutely pleased.

@PaoloMarcelli

5 жыл бұрын

Thank you I'm happy the video has been useful for you.

brilliant video thank you for sharing

Absolutely Brilliant!!!!! Very easy to follow. Thank you sooo much. I used WIR to reset. Type in Waste ink reset. download programme for free and type Trial in the key. Up and running.

@PaoloMarcelli

3 жыл бұрын

Yup! It works but it brings the counter to 90% not 0%, so it will be locked again in a few cleaning cycles :) It's good anyway because you can keep printing for a while maybe after you get an urgent document to print.

Hello! This was a very informative video, thank you for posting it! I'm curious if you know how to use new Epson "Initial" cartridges after they've already been used in the printer. "Initial" cartridges are easy to find and inexpensive and are genuine OEM Epson ink. Any thoughts to force the printer to keep using this type of cartridge would be much appreciated! Thanks!

You are a life saver, thank you.

More Help than Epson Themselves, Thank you

@PaoloMarcelli

5 жыл бұрын

Thanks :)

Thank YOU So Much!!!

Great tutorial and how to guide :) Should stop people from throwing their printers out when they are still fine! One thing to note. The original pads/sponges can be cleaned almost fully and you can re-use them. You have to run them under the tap (at a low pressure) until they are completely clean - in my experience, this takes about 15-20 minutes per small section. (I reset and cleaned an Epson BX625FWD, which was actually easier to open than this - just one screw.)

@PaoloMarcelli

5 жыл бұрын

Hi! I hope, one of the reasons why I make these videos is to avoid or better reduce waste :) Note that different printers often uses different kinds of absorbing pads, the ones of the BX625FWD should be a bit easier than the ones of the XP-750 and similar ;)

working with Windows 10 Thanks superrrrr!!!

Thank you for this great video. Works fine with XP 720.

thanks a lot really help me get back on track to working

@PaoloMarcelli

5 жыл бұрын

Thank you for watching, I'm happy you found it useful. Paolo M.

A lot of help thank you very much

Thanks a lot!!! Excellent tutorial. My XP-700 is working again!!! (Apple computer-MacOS Mojave)

@chorcor888

4 жыл бұрын

how did you disable your printer monitor status?

@claudiarodriguezwilde5276

4 жыл бұрын

Hi @@chorcor888! To reset the ink pad counter, read the ​@UCRFKSRh6Zj1_1egOW-rt_Ug's post below. I needed no more (Apple computer-MacOS Mojave)

Useful video! You can get replacement waste ink housings complete with new pads on ebay, I got mine for the XP-750 for about £12.

Yeay! It worked! Thank you for this easy guide and for the unlock program!

@PaoloMarcelli

4 жыл бұрын

Thank you for your support :)

@chrisdavies3589

4 жыл бұрын

Samuel Tylstedt Z Z Hello. Re the KZread video by Paolo Marcelli on replacing the ink pad on the Epson XP-750, I’ve emailed Paolo for the ink pad reset program, however he seems to be out of contact. I understand Paolo sent the program to you and I’m hoping you might be willing to pass it on please? If you would be so kind, please message me and I’ll provide my email address. Many thanks.

@SamuelTylstedt

4 жыл бұрын

@@chrisdavies3589 sure I'll can do that

@chrisdavies3589

4 жыл бұрын

Samuel Tylstedt Thanks Samuel. My email is cmdavies23@gmail.com

thank you so much! 🤝 I didn’t want to throw away my old xp-530 because of such minor problem. Not only waste of money, but also bad for ecology. I’ve bought new pad on Amazon, and used WIC utility for reset. 😁👍

Thanks for your video. I have a Epson XP 530. It works perfectly. Molte grazie

Molto mooolto utile ed estremamente chiaro. Complimenti!!

@PaoloMarcelli

3 жыл бұрын

Grazie :)

Great job, thanks and forza Italia!

@PaoloMarcelli

4 жыл бұрын

Thank you so much

Buonasera Paolo, ho utilizzato ancora la procedura e ha funzionato egregiamente, sempre grazie del TUO prezioso aiuto.

@PaoloMarcelli

4 жыл бұрын

Ottimo :)

Thankyou for your instructive video. Instead of cleaning the filters I have stuffed the box with cotton stuffings. Now I need a software to reset the counter. I have a MAC with software 10.15.2 Catalina. Do you have any suggestions where I can find this software ?

grazie mille! Sulla mia xp605 ha funzionato alla perfezione!

Thanks a lot... not needed for me but saved for the next time... Any recomended inks? CISS? rechargable inks?

Bravo! How you managed one handed and with your video I just don’t know😂 but your video is excellent and so very helpful. Thankyou from UK.

Hi This has given me some thought, I want to fit a external waste system to my Epson XP 850,following your instructions I just can not see the fill tube, is this possible to access the tube at this stage and put the waste ink tank in back, after connecting the tube to the external waste tank,this would be very helpfull. if this is not the case,whats the chances of you making a full video on installing the Epson XP 850 waste tank system. It is very obvious you have the talent to do so. I really enjoyed the instruction. Many Thanks Ron Thomas

@PaoloMarcelli

6 жыл бұрын

Hi! I'd really enjoy to make a video on the XP-850 but I don't have that printer, so it's impossible for me unfortunately :/ I'd like to avoid making mistakes, but I really think the disassembly of the waste ink container should be the same of the XP-750, if you managed to remove the waste ink container you should notice that on the bottom of the printer where you removed the waste ink container there's a port where ink comes out, this video could be useful for you, it describes how to connect that port to a tube :) kzread.info/dash/bejne/goWulo9_ibXfd6g.html Thanks for the subscribe If you need anything else I'm here!

your film was really helpfull

Hi, have just completed this sequence on an XP-750 Unlike most videos is was exactly correct in every detail. I watched the video a number of times before I decided to go ahead. I was in two minds as to whether to attempt it. Fact is, it all went perfectly, Brilliant video, thanks so much

Hi, great video thank you! Can you please let me know where to find the software for Epson xp-452 please?

Great video, well done, but I think I will put some compression on the sponges with an absorbent layer to dry them, it means they will retain their shape, probably just wash and spin in the washing machine... Thanks again, sorted a wee pigment printer out...

Great Job Very Detailed Easy to Understand I would like more Info to purchase your Program Thanks' Joe

Complimenti, ha funzionato tutto!!! Perfetto

@PaoloMarcelli

5 жыл бұрын

Grazie :)

Hi! This video was great I ordered a new ink pad and installed as per your video, thank you so much! I now need the key can you help please. Thanks again.

Hi Many Thanks for the quick response,after removing the tank can you describe the port,are there 1 or 2 pipes to connect to, also is there enough room to fit spring clips to hold the pipe or pipes together, other than that you have explained the removal of all very clearly. Regards welshman 2081

I was completely puzzled when I got the message displayed on the printer. your videohas really been helpful, i could manage the hardware part very easily for my XP-850. Very similar to the XP-750. Cleaning the pads with rubbing alcohol ( methylated spirit) worked very fine for me. Am a bit lost on the sofware part right now, but will dig a bit more into it as a side remark, I saw a comment from an a**hole regarding your English... am French and can only praise you for making a video in English to help a wider community. Ben fatto !

@PaoloMarcelli

5 жыл бұрын

Hi! Thanks for everything you said, if you need the software send me an email and I'll send you a link to download it safely. Paolo M.

thanks buddy you helped me a lot! i'm not really thinking you can buy these sponges by themself but anyway i just try to use them ones again.

@aronhuuber7174

6 жыл бұрын

ah just found some www.octoink.co.uk/categories/Waste-Ink-Solutions/Replacement-Pads/

@PaoloMarcelli

6 жыл бұрын

Hey :) Thank you for your comment! Here in Italy you can buy directly from companies that work from Epson like MK, and only if you are the owner of a company EET Europarts, but I'm happy that you've found a new replacement... Yes you can still wash the used ones and use them again but it's a huge mess that I wouldn't get into if I could find the new ones at a good price! Paolo M.

@TheSpotify95

5 жыл бұрын

Washing the old ones out takes about 2 hours under a cold tap - and of course, wear gloves :).

How bout the Ecotank models? The pads look the same but how do we reset the software? Thanks!

Great video Thanks !!!!!

@PaoloMarcelli

3 жыл бұрын

Thank you :)

Thanks for the video. I just rolled the old pads dry. After rolling their weight was 70 % less than before rolling. That is enough.

@PaoloMarcelli

2 жыл бұрын

Thank you :) Yeah I think it should be fine!

excelente

Thanks for the tutorial Paolo but where do I get the Epson adjustment program fro my Epson XP-700 from?

@tcvideosennistexas

3 жыл бұрын

I also would like to know where to get the epson adjustment program , I have a epson xp 860 , appears without the 'adjustment program' everything else is useless and the printer is worthless,,,,( I also will NEVER buy any epson product )

Nice job guy.

@PaoloMarcelli

4 жыл бұрын

thank you!

Can you advise me on what the link is for the adjustment programmer please ?

IDEA FOR INK ABSORBER MATERIAL: Thanks for a great video Marcelli. I asked myself what is the most absorbent material most commonly and cheaply available. The answer I came up with was ladies sanitary towels. - So I went to my pharmacist and he told me the 'overnight' ones were the most absorbent. I got 20 for US$1. I cut one to the right width and took off the outer layer and then folded it into the tank. Perfect solution. - Anyone need 19 sanitary towels :) ?

@johnb4639

5 жыл бұрын

My thought was to stack the tank with suitably arranged tampons - has anyone tried same?

hello the video is beautiful thank you ! but have you the link to download epson adjustment for XP750 please ! thank alot

@PaoloMarcelli

6 жыл бұрын

Hi! Thank you. Sorry but I cannot publish a link to it, write me an email and I'll send you it. You can find my email in the video description. Paolo M.

Hi. Could you please send me those 2 links? And will this work for the XP-830? Thanks!