Tq for making this really good informational video. Really appreciate your effort.

@wawayltd

Жыл бұрын

You're welcome 👍

thank you very much for the nice video

Great video. What torque is required for the inner tie rod and the 18mm nut of the track rod end ? Thx

great video thanks, i have a knock noise but only when parking at at very low speed in car parks etc no play when driving I guess it could be the same issue .

@wawayltd

3 жыл бұрын

Best way to find out, raise the car, check joints and bushings, check for play.

Hi, very nice video however it does not say how to cope with the very little access available to tighten the inner side zip tie of the sleeve. Thanks all the same.

@wawayltd

11 ай бұрын

It's as tricky to explain as tricky to do it, but it's doable with a little bit of fiddle 😉

Thumbs up 👍

@wawayltd

2 жыл бұрын

Thanks 😊

Sir! I am fan of yours...may i ask you why you are replacing these parts.....whats the fault...if you kindly explain...my steering shakes. I have replaced driveshaft and did balance and tracking. But still shaking. I have same car as yours..will be appreciated for your advice

@wawayltd

3 жыл бұрын

The reason for replacing tie rod I showed in the video - it had developed pretty bad play. If your steering is shaking only when you braking on high speed it could be deformed brake discs. If it just shaking as you drive fast, could be a problem with steering rack. Get it checked. Good luck.

Great video. Your sway bar bushing doesnt look good at 5:44

@wawayltd

3 жыл бұрын

Yeah, probably. It doesn't give problems so far, I might replace them soon. Only 389.000 miles on a clock, what can go wrong 😁

@HamzaMirofficial

3 жыл бұрын

My front wheel makes tyres makes clanking noise especially on bumps. Plz do sway bar bushing video.

@Wiliuz

3 жыл бұрын

@@HamzaMirofficial bushing not sold as separate item from vw, but available in polybush. There is a step by step on line at powerflex website. Clamps needs drilling, there ia a bit of work

@wawayltd

3 жыл бұрын

Can be anti-roll bar link or track rod - it needs to be checked.

@HamzaMirofficial

3 жыл бұрын

WheelsAndMotors sway bar replaced 3month ago. Could be bushing? Will using WD40 on bushing stop noise? Saw someone on KZread, will opening sway bar requires wheel tracking?

What keys are you using..are very long

@wawayltd

3 жыл бұрын

What keys?

@foetab028forster9

3 жыл бұрын

@@wawayltd fix head spanners i think they called in english ..those chrome tools

@wawayltd

3 жыл бұрын

Don't know, I think they are normal size..

@foetab028forster9

3 жыл бұрын

@@wawayltd ok :) wish you a happy new year and all the best

@wawayltd

3 жыл бұрын

Happy New year 🍾🚀

Also, as why are you replacing this? What issues does it give and why

@roliepolie7679

3 жыл бұрын

Makes steering unstable and creates a bad knocking noise that's why u do it 👍

use PLUSGAS, it`s MUCH better than WD40.

@wawayltd

3 жыл бұрын

Thanks, I'll try it.