Replace DAMAGED Caps on Caterpillar 815 Soil Compactor Wheels | Welding & Arc Gouging

Ғылым және технология

This video is a job we did to replace the worn out and damaged caps on a set of four compactor wheels for a Caterpillar 815F Soil Compactor. Over time the caps get damaged from compacting dirt, gravel and rocks which causes abrasion and wears down the caps. First we carbon air arc gouge off the welds to remove the worn out caps using our Lincoln Electric DC-400 welder and carbon rods. We then wire wheel and grind off the dirt and welds to prepare the pedestals for the new caps. Then we fit and tack the new caps on to the pedestals using Fluxofil M10 metal cored wire. Once all the caps are tacked in place we weld them on using Hobart XL525 dual shield wire to finish.
In this video we are using:
- Lincoln Electric DC-400 Welder
- WIA Weldmatic 500i Welder
- Geiger Pneumatic Needle Scaler
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
#australianmachinist #machineshop #machinist

Пікірлер: 2 700

  • @CuttingEdgeEngineering
    @CuttingEdgeEngineering3 жыл бұрын

    Hey viewers thanks for watching this weeks video from our workshop! Something a bit different than what we usually work on. Those wheels are about 1.2 Tonne each when finished 💪😎 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly videos 👇🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/

  • @nuralamazis2921

    @nuralamazis2921

    3 жыл бұрын

    👍👍👍👍👍👍👍

  • @kamon125za

    @kamon125za

    3 жыл бұрын

    👍👍👍✌️✌️

  • @artemavdalyan2276

    @artemavdalyan2276

    3 жыл бұрын

    what is it tell me ,, what do you do Сurtis you are a master from god

  • @matiu8451

    @matiu8451

    3 жыл бұрын

    How many hours you do a week? it's always dark outside!

  • @artemavdalyan2276

    @artemavdalyan2276

    3 жыл бұрын

    🤣🤣🤣whels

  • @Mac_F87
    @Mac_F873 жыл бұрын

    One of the few channels where the comments section isn’t littered with armchair experts. Just people who admire your expertise and knowledge and rightly so.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    😂😂😂 We used to have armchair experts until we called them out lol 😎👍

  • @rowdog6376

    @rowdog6376

    3 жыл бұрын

    Yep. Only a lunatic would criticize

  • @vincenttrigg4521

    @vincenttrigg4521

    3 жыл бұрын

    I feel out of the loop.. armchair experts?

  • @AmperaService

    @AmperaService

    3 жыл бұрын

    The thing is that you can't be more of an expert then the expert we're watching!

  • @thomas316

    @thomas316

    3 жыл бұрын

    I'm sure if there was a way of doing twice the work in half the time this guy would have worked it out. I'm just happy to watch a pro at work. 👍

  • @metricdeep8856
    @metricdeep88563 жыл бұрын

    This dude just rocks every job all by himself.....Total Respect. Obviously he is well equipped but his knowledge and broad skills are top notch. I always love to watch a man who is good at what he does and is straightforward and humble about himself....and just wants to better others by sharing knowledge. Best guys ever! You'll know if you're in a room with one cuz they are always listening and not shooting their mouths off about what they know....the knowledgable ones got that way by always learning from others.

  • @matthewmoilanen787

    @matthewmoilanen787

    Жыл бұрын

    Agreed, every day is a school day for the humble and knowledgeable.

  • @ronnym1977

    @ronnym1977

    3 ай бұрын

    I have to agree.

  • @glashoppah
    @glashoppah5 ай бұрын

    Those wheels must cost an absolute fortune, to be worth that much labor repairing them. Holy cow. That is just astonishing.

  • @brianjohnston9822
    @brianjohnston98222 жыл бұрын

    listening to your bloopers I am amazed that you actually make through your dialogue. Your camera person makes a great producer, director and editor.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    2 жыл бұрын

    yeah much better at getting in and doing the work 😂

  • @andrewstoffel1170
    @andrewstoffel11703 жыл бұрын

    I can only imagine the excitement in your voice when a client calls and says ‘ I’ve got a set of drums that need reshoeing’

  • @brettymike

    @brettymike

    3 жыл бұрын

    The money would be exciting ;-). I like and much prefer the lathe work. But I must say anything & everything this guy does is amazing, he is a Master. The camera lady & safety inspector are just the best too! :-) :-)

  • @gl2250

    @gl2250

    2 жыл бұрын

    Long miserable work (I've done it) but puts a lot of labor hours on the ticket...

  • @LogicIndustries
    @LogicIndustries3 жыл бұрын

    The outtakes on these videos are solid fucking gold. Dude is a solid machinist and a hell of a welder to boot. You Aussies are all right.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hahaa thanks mate! We think we're alright too 😂👍

  • @young11984

    @young11984

    Ай бұрын

    Couldnt agree more, its nice to have something to watch and never the same thing passes through the shop that ive seen so far (only been watching for a few weeks now but have seen a lot of vids from 2 years back to now) quality workmanship, cool dog and the laughs from them at the end tops it all off

  • @richardkan8499
    @richardkan84997 ай бұрын

    Kurtis is a work ethics hero, working late into the night. His customers have all this evidence of quality of construction to back it up

  • @MrJdubbya36
    @MrJdubbya368 ай бұрын

    After working in a shipyard for almost 40 years I can actually smell the carbon arcing and grinding in this video. Can't tell you how many days I went home smelling exactly like you do at the end of the day. Interestingly air arc gouging was invented and the company ArcAir founded in the shipyard I worked in and the town I live in.

  • @henryD9363
    @henryD93633 жыл бұрын

    I'm so grateful that he talks to his viewers who are not knowledgeable as if they are worth talking to. His attitude is very constructive and decent. The very opposite of a hardcore smarty pants who is showing off on KZread. Much appreciated. I watch all his videos. I'm continually amazed by his hard-working, get it done attitude in tackling these very hard big projects. He starts. He finishes.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate thanks for this great comment it's good to know the videos are enjoyed. And thank you for watching, cheers!

  • @user-tt5zn1zm9g

    @user-tt5zn1zm9g

    2 ай бұрын

    ❤😅 Pakistan

  • @Tasarran

    @Tasarran

    20 күн бұрын

    I also like that he explains both the stuff a newb would want to hear, as well as the info an expert would want to hear... From breaking down how the gouger works to what kind of wire/voltage/feed rate he uses on the torch.

  • @Wulferious
    @Wulferious3 жыл бұрын

    That was NOT a quick knock-out one afternoon job. That was a lot of hard work. Well done!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    You're not wrong mate was a few solid days in it

  • @richardpalleschi4807

    @richardpalleschi4807

    3 жыл бұрын

    So glad they invented the air arc & wire feeds. Nice to have good factory edges to work with.

  • @citylockapolytechnikeyllcc7936

    @citylockapolytechnikeyllcc7936

    3 жыл бұрын

    @@CuttingEdgeEngineering After the first one, the rest looks like punishment of monotony. Less fun that line boring and making chips

  • @paulbowler7302

    @paulbowler7302

    Жыл бұрын

    @@citylockapolytechnikeyllcc7936 @cutting edge engineering Australia - i like that term: "punishment of monotony" it really speaks to those repetitive tasks.... possibly explains why i'm not a bricklayer too :)

  • @teeslunk
    @teeslunk2 ай бұрын

    I’m watching all of ya videos from the oldest to newest.

  • @wincoder
    @wincoder2 жыл бұрын

    There are so many positive comments about this channel and Kurtis' work that it almost seems pointless to post one more. However ... Kurtis is a truly amazing guy. I am constantly impressed with the quality of work, the care taken with small things like mounting jobs on the mill, tool changes on the lathe, fabulous welding, attention to detail, and mostly, the totally awesome videos of it all by his wife. I also love the details about weld wire, tool tips, gasses, etc. Fascinating stuff for anyone who's ever done any of this sort of work. This is by far the best channel on KZread.

  • @bigbear3427
    @bigbear34273 жыл бұрын

    Sure everyone would like to thank the Mrs for her camera work ,outtakes always bring a smile ,cheers love watching others work lol .

  • @bryan.conrad
    @bryan.conrad3 жыл бұрын

    My favorite part might be the bloopers. You two are so sweet together.

  • @mr.anderson9938

    @mr.anderson9938

    3 жыл бұрын

    She cracks me up , especially laughing at him. Just good stuff

  • @mwalker9401

    @mwalker9401

    2 жыл бұрын

    My favorite part is doggo

  • @kilananderson6027

    @kilananderson6027

    2 жыл бұрын

    I totally agree! This was awesome!

  • @johnbyrne4438
    @johnbyrne44382 жыл бұрын

    Whoever is holding that camera is doing a dang good job too. It's good to see every aspect of a job from all angels.

  • @6brman224
    @6brman224 Жыл бұрын

    I'm now retired, but did an apprenticeship as a pipefitter in the 1970s. Part of it was gas and manual arc welding of steel pipework, mainly heating pipes. I was average at it I suppose. It's a pleasure to watch someone highly skilled across many disciplines, making the job look easy. And anyone who keeps a dog as happy as that can't be bad.

  • @9mmomen
    @9mmomen3 жыл бұрын

    When this finishes I'll have 8 minutes to spare before work, perfect.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Nice! Have a good day mate

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    God's on your side today

  • @kennethmcconnell3675

    @kennethmcconnell3675

    3 жыл бұрын

    @@CuttingEdgeEngineering h

  • @maggs131
    @maggs1313 жыл бұрын

    We love variety and seeing all the cool and different stuff you work on. Just watching an absolute pro doing whatever is awesome 🙂🤘

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Thanks mate! I enjoy the variety and different jobs too hope you enjoy the vid

  • @wilson2455

    @wilson2455

    2 жыл бұрын

    14:30 - Careful !!!

  • @hansbeamer5725
    @hansbeamer57252 жыл бұрын

    You weld in an office chair 💺. You're a BOSS

  • @hugolafhugolaf
    @hugolafhugolaf5 ай бұрын

    Rewatching this old vid, you can see that Kurtis’ delivery and ease in front of the camera has improved a lot. It wasn’t bad then, but it’s damn near perfect now for these types of vids.

  • @hippo-potamus
    @hippo-potamus3 жыл бұрын

    As soon as I open any CEE video I immediately hit the thumbs up. I already know the video will be awesome. Thanks for sharing. -Cheers

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Thanks mate we really appreciate that level of support!

  • @dougankrum3328

    @dougankrum3328

    3 жыл бұрын

    Yeah, some channels like this, you know it's going to be interesting..!

  • @Skavin1000
    @Skavin10003 жыл бұрын

    I love the reverse lizard at 3:23 crawling backwards out from under the wheels

  • @lancecluster

    @lancecluster

    3 жыл бұрын

    Wow, you have good eyes, Why eyes tend to be "rolling" while watching these as I know nothing about this subject, but I am fascinated by it.

  • @xxn0cturn3xx

    @xxn0cturn3xx

    3 жыл бұрын

    In the "upside down" even the lizards crawl backwards 😂

  • @jumpaydj

    @jumpaydj

    3 жыл бұрын

    I had to rewind it

  • @wdhewson
    @wdhewson2 жыл бұрын

    Gotta admire a man working for a living !!

  • @TBizzell68
    @TBizzell682 жыл бұрын

    I always assumed that those pieces were solid. You learn something new every day

  • @timgiven3826
    @timgiven38263 жыл бұрын

    Thank you kurtis for taking the time to explain to all of us what each new project does. Have a fantastic weekend, an the outtakes are hilarious. Thank again.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate always welcome we appreciate viewer feedback like this! Glad you enjoyed it

  • @_zzpza

    @_zzpza

    3 жыл бұрын

    @@CuttingEdgeEngineering Yeah, explaining what it is and where it comes from really helps.

  • @artmckay6704

    @artmckay6704

    3 жыл бұрын

    ditto! :)

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    A lot of channels that I watch of men working, like Demolition Dave, don't explain really what's going on. I wish Dave would explain those explosive elements he put in those rocks. The two of them are the hardest working guys I know about.

  • @MajesticDemonLord
    @MajesticDemonLord3 жыл бұрын

    I've had a shit week. Thanks for being a consistent highlight of my Friday.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    New week ahead mate hope it's a better one!

  • @vincenttrigg4521

    @vincenttrigg4521

    3 жыл бұрын

    I also hope you have a great next week as well as the remainder of this one! (I forget that people don't include weekends as part of the week.. oops)

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    Amen. I just finished my tax crap here in the US. Need a break to calm down

  • @Sky1Down

    @Sky1Down

    3 жыл бұрын

    I'm with you brother.. I left at noon today, just tired of the bs.. .. ..

  • @JaredJanhsen
    @JaredJanhsen3 жыл бұрын

    I am a simple man, I see pit-bull shop dog, I like the video. Seriously though, you guys do top-notch work for your customers. Good-as-new work.

  • @CobetcknnKolowski
    @CobetcknnKolowski Жыл бұрын

    I love the outtakes at the end! Also wow, talk about wear on those caps!

  • @petergoose8164
    @petergoose81643 жыл бұрын

    Straight from a video of a guy taking a balance spring out of a Rolex to watch an alien blasting a sacred totem with a laser gun. Life is good.

  • @petermackay8981

    @petermackay8981

    3 жыл бұрын

    Now THATS funny!

  • @XavierAncarno

    @XavierAncarno

    3 жыл бұрын

    Both are precision machinery

  • @brad9529

    @brad9529

    3 жыл бұрын

    Your taste in videos is impeccable, high five brother.

  • @Rigg57
    @Rigg573 жыл бұрын

    This guy is an absolute grafter, he seems to work constantly. Covers the day and the night shift single handedly

  • @properaussie331

    @properaussie331

    2 жыл бұрын

    Boilermakers (kings)

  • @newzealandfromadjimini2cor452
    @newzealandfromadjimini2cor4522 жыл бұрын

    I Like watching this channel … no ‘flower’ talk or acting for the camera …. Just pure information and education …. Plus entertainment if this turns your wheels …. The added bonus of your beautiful dog is also a big part of my enjoyment. Thanks.

  • @jamesdearman814
    @jamesdearman8142 жыл бұрын

    Love the outtakes - funny stuff- self deprecating humor is a lost art. and love Homeless- he's the king.

  • @amcconnell6730
    @amcconnell67303 жыл бұрын

    I love how clean you keep your shop, given the amount of grinding and machining you do there. Just like a chef - working clean is the sign of a true professional.

  • @madeofscars9355

    @madeofscars9355

    3 жыл бұрын

    Last thing you want hanging around is fine metallic powder that shit can go from 0 to 100 real quick.

  • @glenmel78

    @glenmel78

    3 жыл бұрын

    Can confirm, we spend the last two hrs of every Saturday cleaning shop. We clean as we go but it gets in places you'd never even think of!!

  • @danm726

    @danm726

    3 жыл бұрын

    Proly so his dogs can walk around. Worked in a shop like that. Wouldn't reccommend working for anyone who brings their animals to work...

  • @citylockapolytechnikeyllcc7936

    @citylockapolytechnikeyllcc7936

    3 жыл бұрын

    @@danm726 Put mop heads on the paws

  • @420Chameleon
    @420Chameleon3 жыл бұрын

    This has rapidly become my favorite KZread channel, and I'm always eagerly awaiting Fridays for the uploads🤣 I appreciate you all for everything that you do and giving me such quality entertainment!

  • @anthonyvandeheiden2943
    @anthonyvandeheiden29432 жыл бұрын

    Really Nice to watch a true craftsman doing things the right way ! Homey is Hilarious !!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    2 жыл бұрын

    Cheers mate thanks for watching

  • @dcolb121
    @dcolb1213 жыл бұрын

    Somebody should make a collection of all the outakes. I'd watch them over and over.

  • @jacilynns6330
    @jacilynns63303 жыл бұрын

    Haven’t seen gouging rods in twenty years. Now I feel old. That is a lot of welding!

  • @kristianskov4841

    @kristianskov4841

    3 жыл бұрын

    ....wish I hadn't seen them for 20 years...👨‍🏭

  • @CGT80

    @CGT80

    3 жыл бұрын

    @@kristianskov4841 I have only used gouging rods one time. About 20 years ago I got my Miller 330abp 460 amp tig welder and decided to try the gouging gun and rods that came with it. That is loud, hot, nasty work and at the time I didn't have a big enough air compressor to keep up. Later I got a small plasma cutter and use that for gouging the small items I work on. Eventually, I will get a hand torch for the Hypertherm Powermax 65 that is on the CNC plasma table that I built. I wonder if plasma works as well as the gouging rods. The hypertherm has a setting just for gouging.

  • @kristianskov4841

    @kristianskov4841

    3 жыл бұрын

    @@CGT80 apparently it does..... I've never tried it..

  • @Murphyslawfarm
    @Murphyslawfarm3 жыл бұрын

    The camera work was brilliant in this video great work to the Missus 🍻👍

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Thank you 😄

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    Yep! They always get their jobs done. And done very well

  • @timmayer8723

    @timmayer8723

    3 жыл бұрын

    The camera work is as good as I have ever seen. Your wife (editor) has professional talent. Hollywood might be calling. Then you will be hanging around with Lady GAGA and George Clooney.

  • @criss0077
    @criss0077 Жыл бұрын

    Love how you included the out takes. Shows your only human like the rest of us plus it’s good entertainment. The final cut of the video is always well edited and very informative. Your a talented welder.

  • @jerryglen986
    @jerryglen9863 жыл бұрын

    Kurtis the boss and Australian fighter pilot Major Four L'eggs AKA empty bowl. How is the happy cutting edge engineering crew doing? Stay exactly the way you are Kurtis, enjoy the outtakes. Being yourself always builds the best KZread channel. Hard to watch people trying to be something their not. You guys are truly authentic👍🍺🍺🍺🍺🍺🍺🍺🍺🤪

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey Jerry! We are doing great mate has been a good week hope you are well. Thanks for the endless support and we won't change for anyone haha will keep it real here can promise you that 😎👍

  • @vincenttrigg4521

    @vincenttrigg4521

    3 жыл бұрын

    Is that your dog in your profile picture?

  • @kamilw207
    @kamilw2073 жыл бұрын

    In Poland it is now 9 am. This is going to be a good day 😁 Cheers 🍺

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Good morning to you! Have a great day

  • @macmac19800

    @macmac19800

    3 жыл бұрын

    Pozdrawiam kolegę z Polski :-)

  • @mat-wm1kv

    @mat-wm1kv

    3 жыл бұрын

    Również pozdrawiam

  • @kamilw207

    @kamilw207

    3 жыл бұрын

    Zdrówko 🍻

  • @czykbry8094

    @czykbry8094

    3 жыл бұрын

    o kurcze Polska 💪🇵🇱

  • @matstanky7071
    @matstanky70712 жыл бұрын

    It is really nice to see more stuff being repaired instead of just thrown out. Thanks for the videos.

  • @tomas19cronin

    @tomas19cronin

    Жыл бұрын

    It’s too expensive to throw I bet them compactor wheels are priced in 5 digits

  • @grahamturbett

    @grahamturbett

    Жыл бұрын

    @@tomas19cronin last pair I saw up for sale (not sure what machine, about the same size) had a price of $9800 each

  • @lanepentecost7080
    @lanepentecost7080 Жыл бұрын

    Man iv done hundreds and hundreds of 815, 826, 836 and even some bomags. I can't imagine having to roll a wheel around in the floor to weld it. Our shop took a axle out of 836 Compactors, welded them up on a stand, hooked a electric motor to the pinion with a chain(so you can get a gear reduction with sprockets) and had a speed controller for you to set in your lap while you weld along with a scaffold in the front to stand and do your cleats up top since we primarily used metal cored wire. Also cut out multiple hub adapters so whatever wheel it be,, we can just bolt that adapter on and bolt the wheel up.. Props to you for sure man!🤣

  • @cheif10thumbs
    @cheif10thumbs3 жыл бұрын

    One man shop busting out the Premium Quality Work in a day that would take a Union shop a week to do halfassed. Bloody Legend! I worked on logging and road building equipment for a Union shop for 11 years until I figured out the Non Union shops did better work FASTER and with better quality! Better money, LESS Grabass and disorganization. There are good Unions out there. I won't name any particular one. The GOOD Unions offer ongoing training, best practices and safety training. The bad ones are run by crooks just hoovering up your dues and telling you to stop working to leverage your employer. For me it's do the job right, SAFELY, the first time and take care of your customer. Curtis is one of those guys. Skookum!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate really interesting feedback here, being a one man workshop I'm free of a Union but have heard both sides of the story when they're involved. Thanks for watching!

  • @UhOhUmm

    @UhOhUmm

    2 жыл бұрын

    The problem is that there comes a point where unions crumble, because of people lobbying against them and then you get shitty work for a lot of money from corporations and the workers get very little benefit. There needs to be a balance as in a lot of other things, there is no not one right way to do business.

  • @tomjohnson3026
    @tomjohnson30263 жыл бұрын

    I really appreciate the extra time you take to explain what you are doing and the tools you use, it’s great to learn from.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate glad it helps thanks for the comment

  • @markfryer9880

    @markfryer9880

    3 жыл бұрын

    That has to be one of the real benefits of KZread apart from dog and cat videos. Its like being tutored one on one as an apprentice and being able to replay the video to reinforce the lessons. There are so many different kinds of skills being taught that it is amazing what you can learn.

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    So very true. I so much appreciate how he talks to his viewers who are not knowledgeable as if they are worth talking to.

  • @frankbodenschatz173

    @frankbodenschatz173

    11 ай бұрын

    ​@CuttingEdgeEngineering that's why probably 95% watch Kurt's! Nice job as well!

  • @donaldhoot7741
    @donaldhoot77413 жыл бұрын

    It's cool to see a modern shop! Not those sub-continent guys in bare feet. Great!

  • @TheAnonymous1one
    @TheAnonymous1one2 жыл бұрын

    Man he works day and night what a hard worker

  • @tommoen6775
    @tommoen67753 жыл бұрын

    This is my favorite. 480 cuts, tacks, welds. Amazing. I was thinking about all the skill needed to even quote a job like that.

  • @PavelMikhalkov

    @PavelMikhalkov

    2 жыл бұрын

    BTW, @Cutting Edge Engineering Australia how you quote a customer for this job: based on working hours?

  • @Aidan1150
    @Aidan11503 жыл бұрын

    That's a couple of days hard and heavy work Kurtis. What we over here in Ireland 🇮🇪 would call feckin dog work. But as my father said, that's the kind of stuff you have to do to keep another man's daughter.......

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    😂 and he would be right! Glad to do these jobs once in a while they do get repetitive

  • @geekswithfeet9137

    @geekswithfeet9137

    3 жыл бұрын

    Fucking lol, your old man knew how to keep your grandfathers daughter in the game 🤙

  • @ThompsonJosh98
    @ThompsonJosh982 жыл бұрын

    Just started my welding apprenticeship presently working in the lumber mills. Dream of starting my own mobile & shop equipment repair business. Thanks for the inspiration

  • @bluethunder1951
    @bluethunder19514 ай бұрын

    When we did ice lugs three per grouser bar on dozer tracks, two guys one on each side front and back took 12 hours to do a D11 from getting it up on stands to getting it out the door. You are a very determined welder 👍🏻

  • @Nicmadis
    @Nicmadis3 жыл бұрын

    Props to your editor and in general speech prodder. Wish I had one following me around and making me sound coherent xD

  • @RollingThunder2020
    @RollingThunder20203 жыл бұрын

    Nothing like seeing the sun crawl across the floor during the time lapses to drive home how bloody long this took.

  • @charlesseymour1482
    @charlesseymour14822 жыл бұрын

    Curtis, this was a Monmouth job. you must be proud to get this job behind you!

  • @davedunn4285
    @davedunn4285 Жыл бұрын

    I must say mate a lot of repetitive work but you always do a perfect job . You are an inspiration for all young guns who want to learn your trade . You explain how to do the job and demonstrate it . Awesome video also Karen

  • @conorlavery4762
    @conorlavery47623 жыл бұрын

    Good morning all from Ireland 🇮🇪 🇮🇪...... another beautiful sunny day here (lol)...... looking forward to the video later guys...... keep up the good work...... 👏 👏 👏

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Mate you're getting better weather than us! Had 3 storms this week here

  • @conorlavery4762

    @conorlavery4762

    3 жыл бұрын

    @@CuttingEdgeEngineering And as everything is bigger in Australia I bet your storms would beat our storms........ glad for indoor work.......😁...... loving the content as always guys....... looking forward to your Q and A.........👏 👏 👏

  • @joostvangiersbergen9746
    @joostvangiersbergen9746 Жыл бұрын

    Guy isn’t shy to grab the bull by the horns and get it done. Great job!

  • @SuperSpudly1
    @SuperSpudly1 Жыл бұрын

    I wonder what you electric bill is when you weld this extensively. BEST KZread Channel!

  • @ralphsmull7049
    @ralphsmull70493 жыл бұрын

    Quarter till 3am, in NW Kansas. Can't sleep so I'm watching fresh stuff from you guys! I'm not a machinist myself, but I really enjoy watching the work that you do. Please keep the content coming, as I will be happily watching!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate hope you enjoyed it, get some rest and have a good Friday

  • @nuralamazis2921
    @nuralamazis29213 жыл бұрын

    I always love the ending scene 😂😂

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    We will make a compilation video of all the outtakes soon!

  • @karlhrdylicka

    @karlhrdylicka

    3 жыл бұрын

    @@CuttingEdgeEngineering Yippie that will be one of the best videos for sure .

  • @markblundell9461
    @markblundell94616 ай бұрын

    I’m just amazed at the variety of jobs Kurtis undertakes. I think he would be capable of anything thrown in his direction.

  • @buddynewman8949
    @buddynewman8949 Жыл бұрын

    Christ that was a lot of work, I got wore out just watching you do it. i can imagine how you feel. Great job as always.

  • @fw1421
    @fw14213 жыл бұрын

    Man,I never thought that those compactor feet would wear down like that. That’s an amazing job to replace all of those. You are one hell of a welder!👍🏻👍🏻👍🏻

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate yeah they will keep wearing down if not replaces, I've seen the pedestals worn down half way before. Thanks for watching

  • @fw1421

    @fw1421

    3 жыл бұрын

    @@CuttingEdgeEngineering I’ve been watching your videos for a while and have wondered,is this your company or are you an employee? If you are an employee,they need to give you a promotion for giving such a positive impression of the companies capabilities!👍🏻👍🏻👍🏻

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Yeah it's mine and the missus business 😎👍

  • @fw1421

    @fw1421

    3 жыл бұрын

    @@CuttingEdgeEngineering You and the Missus have something to be proud of there. Love watching your videos. Thanks for responding!👍🏻👍🏻👍🏻

  • @nder12345
    @nder123453 жыл бұрын

    Awesome. Thanks Kurtis and misses. The content is always interesting. Cracking a cold one and enjoying.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    That's how it's done 😎👍

  • @thomasharris2919
    @thomasharris29192 жыл бұрын

    Did this kind of work for 45 years, you do a excellent job, miss it but don't. Gone fishing

  • @roydenyoung2390
    @roydenyoung2390 Жыл бұрын

    Thanks for explaining everything to people like myself who have no idea about the trade

  • @iancraig1951
    @iancraig19513 жыл бұрын

    Man that was slick---so good to see a skilled tradesman at his work..Cheers Kurtis that was enjoyable..

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Cheers Ian glad you enjoyed this one mate

  • @zahimo
    @zahimo3 жыл бұрын

    The lady's laughter is the icing on the whipped cream, I love your videos.

  • @bofilen-ii4fs
    @bofilen-ii4fs9 ай бұрын

    I want to thank you and Mrs Curtis? Your videos are so very well done, she does a wonderful work with the cam. Every scen filmed is perfect.... I am looking weekley for new episodes. It would be fun if you would introduce wife/girlfriend also. She got a nice voice and she belongs to your Chanel... Best reguards from Chris/sweden

  • @anthonyburke5656
    @anthonyburke5656 Жыл бұрын

    Great to see Kurtis using a respirator, give Homeless a hug for me

  • @deltan9ne306
    @deltan9ne3063 жыл бұрын

    You have become my favorite You Tube creators. Love the variety of work. I don't think it's possible for anyone to make it through the out takes at the end without laughing. Great job Kurtis and his better half!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate this is awesome glad you are enjoying the channel!

  • @125spectrum
    @125spectrum3 жыл бұрын

    It sounds like you really enjoy what you do and the chat between you and Mrs Kurtis is very entertaining. We really appreciate all that you do for us.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Glad you enjoy it mate! We both enjoy what we do

  • @santeebandit3246
    @santeebandit32462 жыл бұрын

    Stoked I happened upon your channel. Learning something new with each video. You should be so proud of yourself.

  • @paulmartin3340
    @paulmartin33402 жыл бұрын

    This has to be one of the most down to earth no bull shit channels on KZread! Seriously..... or no so serious. Love the outtakes and I've also learned a bit about how things work. Cheers shits n giggles and Homeless the wonder dog! 🇦🇺🦘🐨🐕🇦🇺 Penrith nsw.

  • @jessebob325
    @jessebob3253 жыл бұрын

    So interesting. I really do like watching videos that explain why and what's happening to us laymen. You show a real person's job. The video editing is well put together (IMO). The out takes are the best. The doggo breaks are the best. He's such a happy dog. 👍🍻😀🖖🏻

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey mate some great feedback in this comment thanks for taking time to share it! Good to know the vids are enjoyed. Cheers!

  • @henryD9363

    @henryD9363

    3 жыл бұрын

    @@CuttingEdgeEngineering I'm so grateful that you treat your viewers who are not familiar with this like they are worth talking to. I've really learned a lot from you and a few other fellows who show how they do hard work like you do. I'm very old and retired but I just love watching your very professional and diligent hard work. My dog comes to the TV whenever the security dog shows up! Every time

  • @dermozart80
    @dermozart803 жыл бұрын

    Fantastic timing. Just got my coffee in my CEE mug. I wish you all a nice weekend.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Heck yeah that's how it's done! 😎👊💥☕

  • @patrickbateman4148
    @patrickbateman4148 Жыл бұрын

    Thank you for explaining the tools! As someone who doesnt work in this environment, it is very helpful! That's not a Knoife! :) Greetings from Germany.

  • @user-ns5cg6ug4l
    @user-ns5cg6ug4l2 жыл бұрын

    Hello, I am looking at you in Crimea (Russia) and I always admire your professionalism!

  • @demaru983
    @demaru9833 жыл бұрын

    Have a good weekend Carl

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Thanks mate you too

  • @JohannesGustavssons
    @JohannesGustavssons3 жыл бұрын

    Great work as always! I like that you (mostly) wear breathing protection when welding and grinding. Something that a lot of other channels doesn't practice or talk about.

  • @williegillie5712

    @williegillie5712

    2 жыл бұрын

    I had a relative that welded quite a bit of his life using minimum protection he later died from cancer

  • @timebert6141
    @timebert61413 жыл бұрын

    That is a darn nice looking job. Looks like you worked well into the darkness every evening. Weldors have to do good quality to stay in business but also have to be willing to work long hours to meet customer demands. They explained all that to us when we were in trades school and said if it ain't for you leave now no hard feelings.

  • @thatoldbob7956
    @thatoldbob79562 жыл бұрын

    Man, you’ve got som equipment !!! Love tó watch your work. I am 95 years old from old type of work. Congrat. From Canada

  • @roberta4989
    @roberta49893 жыл бұрын

    The outtakes and the funny way the two of you get along....would be great to have a few beers with you guys. Cheers!

  • @MattysWorkshop
    @MattysWorkshop3 жыл бұрын

    Gday Kurtis and Karen, that’s a big job, I didn’t realise there was 60 on each and they take a floggin, I’ve seen pad foot rollers before that have gone to far and working in rocky ground makes a bloody mess of the pedestals, you always get a good variety of jobs come in which makes for awesome content, throughly enjoyed watching mate, Cheers

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Hey Matty! Yeah wouldn't want to do these jobs too often gets a bit repetitive 🤣 We've seen pedestals worn down to about half, the customer got their money worth out of them hahaa We enjoy the variety too glad you enjoyed watching mate. Cheers 😎👍

  • @vincenttrigg4521

    @vincenttrigg4521

    3 жыл бұрын

    Wait is that her name? Karen? I only ever hear her called the misses so I'm curious

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    @@vincenttrigg4521 yes that's my name 😄

  • @vincenttrigg4521

    @vincenttrigg4521

    3 жыл бұрын

    @@CuttingEdgeEngineering Awesome! Good to know!

  • @tomfish4410
    @tomfish441011 ай бұрын

    I really like all the different things that you do in your shop. Plus seeing how happy your pittie is 😂

  • @JackBolly1
    @JackBolly13 жыл бұрын

    Thank you for making these video's on large equipment repairs - so awesome!

  • @stewartalbert3523
    @stewartalbert35233 жыл бұрын

    Sixty five years ago when i was a teenager , i was welding on a hay baler . The farmer that owned it said " it doesn't have to be pretty , but make it hell for stout " !

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Yeah good to make them last as long as possible

  • @michaelt.9372
    @michaelt.93723 жыл бұрын

    6:30 am in Arizona. Perfect start to a Friday!

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Thanks for watching so early!

  • @Ivansgarage

    @Ivansgarage

    3 жыл бұрын

    Me to, Arizona USA

  • @larss592
    @larss5922 жыл бұрын

    So the outtakes were well worth waiting for. Absolutely hysterical. Great job on the video and the work.

  • @gl309495
    @gl3094953 жыл бұрын

    You have the BEST outtakes of anyone on KZread. Also an amazing collection of tools

  • @MattKrogmeier
    @MattKrogmeier3 жыл бұрын

    I've honestly never seen arc welding done to remove pieces...that was super interesting!

  • @jonathonbridges9625

    @jonathonbridges9625

    3 жыл бұрын

    Arc gouging approaches 120db ambient noise and he is very fortunate to be doing it outside. Get shoved up in a hole somewhere arc gouging and it's a miserable time.

  • @heartobefelt

    @heartobefelt

    2 жыл бұрын

    @@jonathonbridges9625 i once had to do air arc inside a small steel tank in summer , it hit 60 - 63 Celcius in there , i did 2 - 3 minutes inside then out for 5 - 10 minutes to cool down , i did it 4 times to finish the job but i knew if i had to go in again it might have killed me.

  • @lovejcdc
    @lovejcdc3 жыл бұрын

    Excellent video bro, you really put in some serious welding in this video. Looks like Homeless is doing great as always. I'm sure the Mrs. is extremely proud of her family.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Yes I am! 😄

  • @matthewmcdaid7962
    @matthewmcdaid79622 жыл бұрын

    Karen has a delightful laugh. And I love the out-takes. Query: How many squeaky toys does Homeless go through in a week? Every video I see three or four packages with toys for the wee fella. He must go through them at a furious rate.

  • @Diggingholes72
    @Diggingholes722 жыл бұрын

    The bloopers at the end are priceless

  • @wes11bravo
    @wes11bravo3 жыл бұрын

    Looks like a good job to break up the usual machining work. Actually, I'd wager that what makes your job so appealing is that no two jobs are exactly the same, and each time you set something up in the lathe or strike an arc, you get a wee bit better than you were yesterday. Very inspiring, Kurtis.

  • @peterwilliams2595

    @peterwilliams2595

    2 жыл бұрын

    I’ve your dog

  • @peterwilliams2595

    @peterwilliams2595

    2 жыл бұрын

    Love your dog

  • @bjones5240
    @bjones52403 жыл бұрын

    Another job well done kurtis! Yours a bloody great example of a true aussie hero, just giving his best and getting stuff done. I really love watching your go about your work!!!

  • @thomaswalker3268
    @thomaswalker32682 жыл бұрын

    like the outtakes funny as heck never loose that sense of humour , love the pup shots , and the good Lady is doing a Sterling job , Keeping it real but with fun

  • @johnnyt6508
    @johnnyt6508 Жыл бұрын

    Sometimes work sets a man free. Your passion can be seen due to your long days and Great results.

  • @aserta
    @aserta3 жыл бұрын

    Holly Hannah, that's a lot of wear compared to the new ones. Owner's getting every last cent he could out of them. :)) Also, dig the variety, you really are the guy that everyone needs on a big job site.

  • @CuttingEdgeEngineering

    @CuttingEdgeEngineering

    3 жыл бұрын

    Yeah mate they were well used 🤣 I enjoy the variety but wouldn't want to do these too often haha

  • @aserta

    @aserta

    3 жыл бұрын

    @@CuttingEdgeEngineering I bet, that's a lot of repetitive work, which is the worst kind of work. Dulls the brain and all that snaz. :) Either way, they came out factory fresh.

Келесі