Hey viewers thanks for watching todays video on repairing the cracked CAT 789 dump truck suspension part. That was our longest video yet! A few machinist porn shots there to enjoy 😂 let us know in the comments which part of the video you liked the best? These front strut parts are obsolete and hard to find 2nd hand so not much choice have to get it repaired. There was a full day in this job to get it all done 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

@elofos0815

3 жыл бұрын

one big question each video: how long did it take in realtime each video... only the welding take take real long, 7-8h cool down

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate yeah for the whole processes is a good days work

@explorationuk6737

3 жыл бұрын

Love the work u do mate ...even with the asshole interruptions lol u gota love the outtakes lol the best part for me . .keep em coming please mate

@joegee2815

3 жыл бұрын

I know it might be sensitive but I can't help but wonder what a job like this would cost.

@howder1951

3 жыл бұрын

@@joegee2815 8 hours X shop rate plus materials?

Do not ever worry about the length of your videos, I don’t care how long they are because I get to see more of the actual work and they are not so cut up

@Natethanastysnake666

3 жыл бұрын

Agreed

@Difisi-qe8gf

3 жыл бұрын

And that’s a fact

@clint2169

2 жыл бұрын

More about the quality than the length... So I keep getting told... 😞

@ronaldsutherland1993

2 жыл бұрын

agreed

@CL-vz6ch

2 жыл бұрын

@@clint2169 different films bud

Never stop adding outtakes.

@MrFixiit

3 жыл бұрын

I agree the outakes are just gold.

@DavidLindes

3 жыл бұрын

@@MrFixiit just watch out for Askholes. ;) (36:29) (Did they see that? 😂)

@noahingram8052

11 ай бұрын

Agreed

I am also a welder. I built and repaired mining equipment for 30 years. I sure miss my trade but to old and reduced to repairing stuff for homeowners and minor repairs to trailers and such. I really enjoy this channel because You are proud of your work and doing it right the first time. Thank you for your great craftsmanship.

Drilling the hole all the way through the new pin to relieve welding heat gas pressure said it all for me. This dude knows where he's been and how he's going to get to the end of the process at hand. Bravo Maestro. Stay safe.

@warrior4christ777

9 ай бұрын

I think that was to let the air out of the hub as the pin went down the hole.

@davidelliott5843

7 ай бұрын

It also prevents air heating up and blowing out his welds before the metal solidifies.

@garydawson5928

4 ай бұрын

Question ? should that hole have been closed on completion?🤔

@leadpoisoning717

2 ай бұрын

@@garydawson5928 Quite a small hole in a very thick piece of metal and enclosed on both ends, so it likely won't matter at all.

Many excellent machinists on KZread, but most only make new tools for their own shop, and useless example pieces. It is a pleasure to see an excellent machinist that also does real work. You are a rare breed, and I hope your customers know how high the quality they get is. Would be interesting to see more of your business: Customers, Suppliers, neighborhood, &c.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching and the comment, yeah we wanted our YT channel to be about keeping it real. Cheers 😎👍

@bastienpabiot3678

3 жыл бұрын

I think many of the youtuber machinist keep their real work out of tye videos

@Hyratel

3 жыл бұрын

@@bastienpabiot3678 not Abom69. his videos are long, but he does Job Work too

@Paultimate7

3 жыл бұрын

Its poor form if you need to insult someone to give someone else a compliment.

@rupert5390

2 жыл бұрын

@@Hyratel no he doesn’t - look at some of his older stuff it was big work now not so much

I love the white arrow pointing to the crack: "Mate, in case you are wondering - here's where it's fucked"

@CuttingEdgeEngineering

3 жыл бұрын

There was about 4 arrows drawn on there just to make sure I could see it 😂

@FishFind3000

3 жыл бұрын

heaven forbid they fix the wrong thing.

@markfryer9880

3 жыл бұрын

@@FishFind3000 No doubt that it happens.

@TrevorDennis100

3 жыл бұрын

@@markfryer9880 Bad enough when fixing a CAT hauling truck. Worse when it's a surgeon taking off the wrong leg.

@quiet_desperation

3 жыл бұрын

😂😂😂

A true tradesman, not only at the top of his game, but obviously has a true love and passion for what he does which ensures every job out the door is perfect and of quality. Values and workmanship hard to find these days. You guys do a great job and amazing videos 👌👍

There is no doubt that you guys are absolute legends. The level of knowledge in all your video’s is off the scale. Your missus has clearly either got training or unbelievable natural talent in production (getting audio and editing right for this type of stuff takes skill). I reckon a big part of your audience is people who are not professionals, if there was any way you could show costing of repair vs replacement part I think it would really help people appreciate the value of your work. You are an extremely talented and relatable couple. Keep smashing it!!

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks so much for this great comment and feedback! We both appreciate the support, the missus hasn't had any training but she has a passion for it loves doing this sort of stuff. Will see what we can do to add repair vs replacement we do often get asked about that. Cheers 😎👍

I don't know anything about any of this stuff, but I find myself fascinated by the process. Like the format: problem, proposed solution, steps to solve, occasional dog interaction, solution, giggling at outtakes. Thanks for making these. Your well explained approach makes this seem straight forward but your skills are off the charts.

@CuttingEdgeEngineering

3 жыл бұрын

Hey Lance thanks for watching mate and the feedback appreciate it! Cheers 😎👍

You should not worry about the length of the video, every bit is enjoyable - watching a master performing miracles. And every f**k is where I would say it too. Looking forward to every episode. Stay safe.

@CuttingEdgeEngineering

3 жыл бұрын

Hey Les thanks mate glad you enjoyed it! And my missus appreciates the feedback she wasn't sure if it would be too long

@leskovacs959

3 жыл бұрын

@@CuttingEdgeEngineering She is doing a good job, and love the outtakes and, of course, your puppy

@surfshawnsurf9724

3 жыл бұрын

The longer the better. 😝 (seriously though, good video)

I am no mechanic or machinist and I have said it before you are an artist and I am just gobsmacked how you do these sorts of jobs so entertaining. The job ended up looking like a factory-made piece just amazing.

@davidelliott5843

8 ай бұрын

I used to buy work like this when I was a power station engineer. We used the people who could do the job properly. Central purchasing were kept out of it because they went to the cheapest and we paid the price of failed equipment.

So glad I found your channel. Brings back so many memories of when I had a workshop doing exactly the same sort of work you do. LOVED EVERY SECOND. Retired now but would love to get my hands back on the tools. Keep the vids coming.

@alexhayden2303

Жыл бұрын

Ad we thought that Stellite was the miracle answer! I migrated to the drawing office. I was made redundant and tried going back to the workshop: Just couldn't do it.

The Hi-Res close up shots on the lathe are magnificent.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate my missus says THANK YOU! She actually got a new phone/camera and had to get used to it so glad someone noticed haha 😎👍

@1verstapp

3 жыл бұрын

so your cameraperson is your missus... you still haven't introduced us... i do enjoy the background giggles, and she does a good job with the camera and editor too.

@markfryer9880

3 жыл бұрын

@@1verstapp The giggles are priceless. Kurtis is a very lucky man.

@glenharker4139

3 жыл бұрын

Might have to invest in a go-pro.

@CuttingEdgeEngineering

3 жыл бұрын

My missus is happy using the Samsung and iPhones for now. 😎👍

"That's not a repair; THIS is a repair". I always learn from your videos. A few interesting things in this one.

@CuttingEdgeEngineering

3 жыл бұрын

hahaa thanks for watching mate!

@gritnix

3 жыл бұрын

I was thinking as well how politely he was saying, "This old repair was shit. Now let's do it right."

@the_hate_inside1085

3 жыл бұрын

Too be honest, the fact it broke in the first place is an indication something is fishy here. Usually a part is never stronger than when it leaves the factory brand spanking new, and that broke soo...

@MrGofarkyself

3 жыл бұрын

I learned you can weld 4140 without preheat!

@janvisser2223

3 жыл бұрын

@@MrGofarkyself Me too😀

Kurtis, as I'm sure many people have said, not only do I respect your knowledge and skills as a craftsman, but I also appreciate your willingness to include out takes. Not only are they human and humorous, it also reminds me to go easy on myself when I don't get it 'perfect' (a dangerous idea in itself) on the first (or 2nd, 3rd...) try. And thanks to Karen (if I heard your name correctly) for being a great videographer and producer. And thanks to your mascot for being a never-ending source of enthusiastic inspiration - on the first take, none the less! Cheers from a Yank.

Seeing and hearing how robust and versatile the button inserts are, has really opened my eyes to better machining. I had thought one had to work only within the very specific strengths of each tool type. So cool, thanks Kurtis!

“That is six thousandths in bananas.” That is awesome. Lol.

@sandarelliott5319

3 жыл бұрын

I have to work in thou and I hate it cause I'm so used to metric lol

@masheroz

3 жыл бұрын

Thou is kind of half way. They are milliinches. The problem is that they're still inches.

@Fatamus

3 жыл бұрын

Yeah, I can do that math in my head like that too.

@djordjeblaga7815

3 жыл бұрын

@@masheroz Exactly. In electronic PCB layout they're using something called "mil". Which is the same as a thou. Not to be confused with a "mill" which is a millimeter.

@genegalpin556

3 жыл бұрын

LMAO!

Interesting to see a Part that was forged at our company in germany getting repaired 😂

@libb3n

3 жыл бұрын

Was the repair good from manufacturer view point?

@TacticoolCraig

3 жыл бұрын

@from the dark side of the moon read your comment before you add it .

@jameslederer7613

3 жыл бұрын

The forging looked good. Cant say I'm very impressed with the set up when it was finish machined. 1/8th of an inch TIR is a bit excessive.

@heinzfissimatent4294

3 жыл бұрын

hallo oliver ,echt jetzt?

@WireWeHere

3 жыл бұрын

@@jameslederer7613 It was a failed repair that developed all the runout which had no relation to the original forging.

Apart from sharing with us your amazing skills, the camera work is fantastic, 10/10 on capturing it perfectly.! And love the out takes!

So glad found an episode I have not seen yet. Needed to relax tonight !!!

Enjoyed the video a lot. My dad was a apprentice machinist during the Great Depression and worked his way up to shop foreman, then shop manager at a steel fabrication company. They built railcars, bridge structures, bearings, etc. I don't think there was anything he couldn't look at and get it fixed. I loved being in the shop with him. People don't realize how much knowledge and training go into working with steel. My dad would be watching this video and telling me exactly what was going on. Very cool.

Done a lot of machining and welding repair, but this is just amazing. Great that you explained the processes. You the man bud!😎

I'm a bushman by trade, cut trees, fleeted native logs with bullies, firebreaked, fought wild fires, and shot pretty much what there is in NZ bush, but I've never worked indoors let alone seen what you do here with your video's. Thanks for shearing and keep them coming I find them fascinating, another mans world.

This sure brings back memories of machine shop in high school in the 60s in England, not that we did anything as complex as what is shown here. We had lathes, mills, drills, bandsaws, aluminum casting, welding, brazing, etc. I made a drill vice that is still being used today by my brother. All such learning was thrown out in favor of computers. I was a software engineer for 48 years and machine shop and technical drawing were the basis for my SW skills because it was all problem solving.

Love your work mate! Could watch it for hours, it’s funny come home from work “boily fitter machinist” and watch more work I’m loosing it!! 😂👍🏻

@CuttingEdgeEngineering

3 жыл бұрын

Hahaa you got it bad mate! I do the same, free time spent watching other machinists on KZread 🤣👍

40 years ago I learned the profession of lathe operator and I am always happy to watch you at work! The best way to relax after work 😉👍 Greetings from Germany and have a nice weekend

@CuttingEdgeEngineering

3 жыл бұрын

Awesome mate thanks for watching from there 😎👍

@paulmallery6719

3 жыл бұрын

Measuring too tite

I love it when it’s the time of day that whatever is in the lathe magically turns to copper.

I love every single video you guys put out. I learn a lot of different ways to tackle a problem by watching skilled craftsman like you Curtis. Thanks to you and your wife for entertaining and teaching.

This is like watching Abom back in the days when he still did "heavy metal" - this is a Good Thing. Thank you, I've learned a lot, liked and subscribed.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching and subscribing!

@td5disco965

3 жыл бұрын

Yes I’m missing Abom79 doing the heavy stuff. But he can clock a part in a 4 jaw like no other. There seems to be a lot of reliance on the accuracy of the 3 jaw here. I’d have thought these parts would need to run very true. Non the less very proficient and watchable.

@CuttingEdgeEngineering

3 жыл бұрын

Thanks for watching mate. Our 3 jaw runs true no need to use a 4 jaw 😎👍

@td5disco965

3 жыл бұрын

@@CuttingEdgeEngineering you do some big stuff and some of the best welding I’ve seen. First rate. I thought it rained a lot here in the UK but I’ve watched a few of your videos where’s it lagging it down!!! Great you both take the time to share the jobs you have through the workshop. Excellent

I absolutely love how the holes of the part are standing still in the video. The rotation speed of the lathe at the holes and the frame rate of the camera match. Very satisfying 😍!

@donerickson1954

2 жыл бұрын

he did that on purpose too.

Karen, you really do an AMAZING job with the videography and editing. The outtakes are gold, and your artistic videography keeps me looking for new episodes every week. Thank you both!!

I have never seen someone as dedicated as you are to making sure the job is done absolutely right. I've enjoyed every video. Thank You

@vart7767

Жыл бұрын

that is why customers come back alot of shops don't realize this

The best thing on You Tube by far, love it love it love it, Homeless was never putting that disc down.

@markfryer9880

3 жыл бұрын

Not a chance!

@CuttingEdgeEngineering

3 жыл бұрын

Cheers mate! Thanks for saying so!

@praetorxian

3 жыл бұрын

Need more videos of that doggo...

There it is! Got my coffee already. Have a nice weekend, everybody!

@CuttingEdgeEngineering

3 жыл бұрын

Cheers mate enjoy your day!

@dermozart80

3 жыл бұрын

@@CuttingEdgeEngineering you too! Awesome job btw, nice video

@rowdog6376

3 жыл бұрын

Got mine

@rowdog6376

3 жыл бұрын

Superb work mate.💪

@giovannibrazzoli7596

3 жыл бұрын

Lots of whiskey for the weekend

This guy is a welder, machinist. A true tradesman. I like your content. I am an Engineer.

These videos are awesome. If they had been available in the 1960's they would have blown peoples minds, and made me into a wizard.

Discovering the cause of the failures you're repairing is really interesting. Finding the threads and crud under the first repair surprised me. Great videos regardless of length. Much appreciated, Cheers from Canada

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching! Yeah that thread surprised me a bit too haha.

The best equipment repair/machining channel hands down!! If I was in Oz I'd be knocking down your door for a job, guys like you make us all look good, cheers Kurtis!

@CuttingEdgeEngineering

3 жыл бұрын

Hey Jim thanks very much mate! Appreciate such a great comment. Cheers, Kurtis 😎👍

That XL525 is a good part of why it never fails. Aside the great machining and the good ol know-how of course.

There was a time when engineers always rebuilt these machines, it is a fascinating process to watch, full credit to you guys for bringing it back with these great videos.

@stanthology

2 жыл бұрын

Some huge companies will toss stuff in the trash because of the potential liabilities if they repair it and someone gets hurt using it. I've seen some stuff chucked out that was amazing to me, a cheapskate.

@davidelliott5843

7 ай бұрын

I’m surprised this extremely important pin is so small.

Love it, you sound like a bloke who has just had enough of dodgy crap. Same as me. Nice work. Love watching how you do it mate.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching. Yeah that and I'm not one to beat around the bush will tell it how it is 🤣👍

@adropbear09

3 жыл бұрын

So true but at the same time Kurtis keeps the coin rolling in fixing f-ups.

Greetings from Greece! Thank you for all of your videos, I'm a mechanical engineer student and your videos are the best way to see a lathe in full action due to covid we can't go to any workshop lessons and videos are the only way to see how these machines work . Once again thank you!

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching hope things get better for you all over there!

I haven't been a fan of anybody since 50years - this changed since I've seen this channel. This is so great work, thank you for sharing with us!

9:20 - that was definitely a drill bit! I thought you would've finished with a nice coat of yellow paint. Kurtis - that was wildly impressive from go to whoa. Thanks so much for sharing. Most guys find it pretty damn incredible to see an engineer/machinist at work. Really enjoyed the whole process. Hell of a weld you used to attach that pin! Cheers mate.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching glad you enjoyed it! Yeah would've given it a coat of jam at the end but this customer has their own assembly/paint shop and they prefer to do all that before it goes on the machine. Cheers, Kurtis 😎👍

@jimmycricket5366

2 жыл бұрын

@@CuttingEdgeEngineering couldn't you have bored right through that disc and then welded the pin in a V on the other side?

@Bialy_1

2 жыл бұрын

@@jimmycricket5366 That is a very bad idea... it would break off in no time.

31:32 the old tenth of a thou whistle 👌

@CuttingEdgeEngineering

3 жыл бұрын

Very nice 👌👌👌

i'm 27 years old and i'm a lathe turner on a new machine Weiler E50 lathe it's basicly a manual NC - or small batch programs CNC like yours. I'm enjoying this content alot cause it's basicly what i do daily like you but on the other part of the world and also alot of parts you make i recognize on daily basis here aswell ;) and even tho i got some experience in this job (started at 19 years old) you just never stop learning new things :D Awesome channel.

Like watching a rocket surgeon at work. I love the diagnosis, probable solution and execution. Your channel is so much more exciting and fun to watch now.

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate thanks for watching and supporting we appreciate it

@steveschroeder1882

3 жыл бұрын

@@CuttingEdgeEngineering wewwaw

@steveschroeder1882

3 жыл бұрын

@@CuttingEdgeEngineering qwq

I love how their are so many different jobs that you can apply welding too

Only just started watching your videos; more entertaining that watching films these days. This video in particular takes my back to my heavy engineering days as an apprentice. We did not have the luxury of TIG only stick welding and hand operated turning devices. All the machine tools were marked 'WAR FINISH' but we managed. I remember an old timer telling me, "Your in the jungle now boy", lol. Keep up the good work. UK S. Wales.

I have a great appreciation for this fellows skill set, before I got into aviation I operated a 36 foot diameter turret lathe, machining huge pulleys for underground mines. love watching this stuff Gordon Dale

That was my first video from you and I couldn't stop watching. I was a trained welder and always wanted to learn the rest of the stuff. It's amazing what you do

@CuttingEdgeEngineering

3 жыл бұрын

Hey mate welcome to the channel glad you enjoyed the video 😎👍

4:46 Trippy! The framerate matches the lathe RPM.

An absolute stonker of a video. This was was everything indeed, highly impressed, your an amazing welder/machinist/philanthropist 😄, but this so far has set the bar. Thank you to all three of you for this content, it’s highly appreciated.

The thought process of the engineering, machine work and welding.... WOW you have some serious talent. Like that Hobart wire you chose for this repair. About 50% of my welds get turned off on a lathe. I love it when a man ain't afraid to turn his welds down. It proves you know they are clean on the inside!

A big "Well Done" to Mrs Cutting Edge, the camera work and editing is always spot on!!!

I'm not the type of fella to ever do this kind of work, but I'll be damned if watching you don't make my OCD feel better. I absolutely love perfection, and you are an absolute provider brother. Love the doggo too. I'll watch as long as you upload

@CuttingEdgeEngineering

3 жыл бұрын

Hey Greg thanks for watching mate glad you enjoy the vids 😎👍

My father was a machinist, he pasted away in 1970, thanks for your video of Master craftsmanship I really enjoyed it.

Haven't seen such great mechanical engineering skills since my days at the old Vales Point power station. They had some very skilled & gifted Fitters & Turners & boilermakers back in those days.

He makes mistakes so he can hear her laugh lol

@CuttingEdgeEngineering

3 жыл бұрын

Yeah...Yeah of course that's why I make mistakes 🤣👍

@jw4620

3 жыл бұрын

And he shares it!

@Cowboy_Ash

3 жыл бұрын

I would make lots of mistakes too just to hear that laugh. Machines and women make the world go round 😉

It ended up looking like a delicious piece of caramel candy! So perfect mate!

@CuttingEdgeEngineering

3 жыл бұрын

Thanks mate!

Don't ya just love this guy, I bet he's saved his customers collectively, totting it all up millions of $dollars, on what they would have had to spend on new equipment. I skip odd bits but a good 1/2 hr coffee break.

I am glad to see that your videographer keeps you on the straight path. Good job both of you.

I’m sure you’re busy as hell, thanks for bringing us along!

@CuttingEdgeEngineering

3 жыл бұрын

Welcome mate! Yeah pretty flat shit hahaa

From busted and crusty to a work of art! Thanks for posting!

@CuttingEdgeEngineering

3 жыл бұрын

Glad you enjoyed it 😎👍

Как же Ахрененно всё же смотреть как другие работают и выполняют свою работу на 100 балов из 100 👍👍👍

@SHU2121

3 жыл бұрын

99,99. Не покрасил((

You are a machine artist - Such precision with such heavy components. Such great insight into this world.

@eriklarson9137

Жыл бұрын

Plus a super-dry sense of humor. I loled when he said "about 6 thou in bananas".

Crikey! Kurtis! Big tools, big chips. Love the music they make when they are peeled off the work! I have channel addiction- and I won't stop!

@CuttingEdgeEngineering

3 жыл бұрын

Hahaaa nice one mate! There's no such thing as too much machining 😂👍

Now we need to know who “The Askhole” is. Great videos, they’re never too long.

@CuttingEdgeEngineering

3 жыл бұрын

hahaaa we know a few of our customers and friends watch this so will keep them guessing 🤣

@HappilyHomicidalHooligan

3 жыл бұрын

@@CuttingEdgeEngineering Chances are if they're asking if they're the Askhole, the answer is a resounding YES!!!! I should know, I'm occasionally one of them... But only when I'm REALLY trying to Piss someone Off...

Dude...the slo mo rocks! And so does Homey.

that's take me almost 40 years back in time when i started work at machine shop on lathe and performed this kind repair . after each job was done i just enjoyed what i was doing for living and proud of my self although i didn't get paid well at the time hahahah . i enjoyed every second of this video job well done .

Favourite time of the week

@CuttingEdgeEngineering

3 жыл бұрын

Enjoy 😎👍

Outstanding Karen and Kurtis...Cheers

@CuttingEdgeEngineering

3 жыл бұрын

Hey thanks for always being one of the first to comment!

That dog has 5 legs😂😂😂

As usual Kurtis I loved every minute I love the process of cutting the badly fitted pin and watching you turn down a new pin and welding it back in and turning the new pin down for the finished job absolutely amazing best regards from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🏴󠁧󠁢󠁳󠁣󠁴󠁿❤️

Hmm it's 2:15am I should probably go to bed soon... I wonder what's on youtube... Oh I guess I'm not going to bed till 3 🤣

@CuttingEdgeEngineering

3 жыл бұрын

😂👍 sorry my missus made this extra long

@markgriffin4888

3 жыл бұрын

@@CuttingEdgeEngineering DON'T BE!!!!!!

@LukeA_55

3 жыл бұрын

@@CuttingEdgeEngineering don't be sorry mate, this is some really interesting stuff you're showing us

@assassinlexx1993

3 жыл бұрын

We love every minute. Always stay for the outtakes.

@LukeA_55

3 жыл бұрын

@@assassinlexx1993 ^^^ what he said

Fabulous! i have watched this video a few times, and others using this saw … just noticed then auger carrying away the swarf ..WOW! THAT IS GENIUS AND SIMPLE!

Watching the pin drop in and I immediately thought "Wow. That was good." Then a second later, I hear Kurtis giving the explanation that it locked when it hit the bottom. Well done!

My Friday morning breakfast entertainment, delivered again.

@CuttingEdgeEngineering

3 жыл бұрын

Hope you enjoyed it mate

Your channel really is some of the best entertainment around, congratulations. Best bit , the pin drop in

@markfryer9880

3 жыл бұрын

That was pretty sexy, and oh so satisfying!

@CuttingEdgeEngineering

3 жыл бұрын

hey mate thanks for saying so we appreciate it! Yeah that was satisfying!

I really enjoy your Vids. s a 35 year T&D man I greatly appreciate your work. knowledge and skills, and a special thanks goes to your saintly wife and your Wonder Dog

I hope he has a apprentice some day so that he can pass down his knowledge,the attention to detail and variety of skills he has is second to none

the shutter speed with that RPM is great with how those bolt holes look.

@CuttingEdgeEngineering

3 жыл бұрын

Thanks for watching mate

@ElementofKindness

2 жыл бұрын

Good thing our vision doesn't see in 30 frames per second. People would be trying to stick their fingers in there!😂

Woohoo, it's Friday and a CEE video. Great to see some lathe work. Nice job.

@CuttingEdgeEngineering

3 жыл бұрын

Thanks for watching mate!

All of your techniques and processes are something to learn from. And you have good habits that all machinist should pay attention to. One that I noticed straight away is removing the chuck T-handle immediately when finished using it. I will be walking down the aisle in our shop and see a chuck with a T-handle just sitting there. Drives me crazy. I harp on them so much about that and they still don’t always do it. I show them videos of a handle getting thrown from a lathe chuck and it punches thru a brick wall like it was drywall. So dangerous. I may just have them watch your videos as a safety training session! Plus they will all love your dog.

This is like watching a Artist. I love these videos. I’ve worked on cars and light duty trucks for over 30 years. This is something brand new to me. Awesome videos👍🏻👍🏻👍🏻

Absolute legend. Love the channel and the out takes are total gold.

@CuttingEdgeEngineering

3 жыл бұрын

Hey cheers mate! Thanks for watching

Anyone has a dog that good looking can’t be all bad.

@CuttingEdgeEngineering

3 жыл бұрын

He brings the good looks to the show 🤣👍

@markschiavone8003

3 жыл бұрын

@@CuttingEdgeEngineering , what breed is that? HD looks a lot like my dog

Brilliant repair as always Kurtis, fantastic to watch...love the Staffy too, he's a proper little character.

I’m going to need to get myself some button inserts and tool holder after seeing this. They can really hog material.

@CuttingEdgeEngineering

3 жыл бұрын

Yeah mate can really feed them, great time savers. 😎👍

Excellent machining, tutoring and videography.

@CuttingEdgeEngineering

3 жыл бұрын

Thanks for watching mate

Now there is a dude worth his weight in gold. Absolutely facinating!

a movie star .. oh , nice job on the pin ...

The pick of the KZread Pics. Great job always good to watch.

@CuttingEdgeEngineering

3 жыл бұрын

Cheers mate! Thanks for watching

Amazing!! Great repair if you can call it that. Better than when it left the factory! Great skills and love the workshop 👍🏻👍🏻

Greetings from the Napa Valley Ca USA. I'm a retiredrig welder for 36 years in the bayarea oil refineries. I have done some field repair with my portable rig. I must say your are one of the best I have seen and that is no bull. I know you have to have the patiance of Job.I'm retired now I'm 77 but miss fitting and fabricating. I did mostely pressure piping and maybe some structural why even pushed the wrenches when work was slow. Thanks for the very detailed easy to watch videos. You be super careful around all that heavy stuff.

I like watching the slow mo curl of that weld coming out

Beautiful. Great editing, too.

@CuttingEdgeEngineering

3 жыл бұрын

Thank you very much!

Love your content, so satisfying to see how well these things turn out. Those swarf curls are amazing!

Great job! I swear that I can almost smell the cutting oil coming off the machine as you turn those parts! Awesome!