Very good video. My dad called me tonight and said his handle broke. Very helpful advice on 1/2 inch PVC pipe. Will definitely do that. Thank you

@bestgirlsdad

2 ай бұрын

You're welcome. Glad this was helpful. Appreciate the nice comment.

Thanks for the great video. I dreaded taking the car in to the shop to fix it. So, I ordered the handle and the replacement went pretty smooth. The PVC pipe was a smart idea.

@bestgirlsdad

Жыл бұрын

You're welcome. Glad that it went good for you.

Great tutorial! Worked perfect for me, and the tip on the 1/2" PVC pipe was a game-changer. Thanks for posting!

@bestgirlsdad

2 жыл бұрын

You're welcome. Thanks for the nice comments.

Another youtuber just used a thin piece of cardboard folded into a U shape. This was done for the front door, because as you pointed out accessing the rear bolt is far deeper. I found that out when replacing the rear door handle. Even with a magnetic hex driver, I still managed to lose the bolt and had to remove the inner door cover .. a 5 minute job that turned into about 2 hours. I really like the PVC tube idea. Brilliant!

Nice vid i just replaced 2 handles. However that pipe concept is not necessary. You just need to push on this 8mm screw and replace the handle while holding/pushing the screw so it doesnt go down. Wrench socket needs to be ducktaped for safety. Thx.

@bestgirlsdad

2 жыл бұрын

Great idea. Thanks!

Thank you very much for this video, particularly the PVC pipe trick. The whole process took just a few minutes and got me through with no frustration.

@bestgirlsdad

11 ай бұрын

Thanks for the nice comment. Glad that it worked out well. Hope you have a blessed day.

Thank you for taking the time to post this great how to video. Well done 👍

@bestgirlsdad

5 жыл бұрын

Thanks for the compliment. Glad that it was helpful.

Thank you so much. My handle just broke this morning. I thought I would have to take it to get repaired until I watched your video. This is wonderful. Have a great day!

@bestgirlsdad

Жыл бұрын

You're welcome. Thank you for the nice comment. So glad that my video helped.

Thanks for your help. I’ve got a new handle on the way. In the meantime I just moved the handle from my back door to the driver side so I can at least get in. Same procedure on the driver side despite the lock on the handle.

@bestgirlsdad

5 жыл бұрын

Glad this was helpful. I did the same thing when the passenger side front door handle broke. It is so annoying not having the handle work. After the second handle broke off, I replaced them all.

Thanks. My wife painted and clear coated the door handle to match. Since this was the front passenger door, I didn’t need an extension. Just used the driver with an 8mm socket. Used a small magnet between the driver and the socket and the replacement took a couple minutes. The rear doors require an extension for the ratchet. I have an 09 with 234,000 miles and all the handles except for the driver’s have been replaced. This was a helpful refresher video for me.

@bestgirlsdad

7 ай бұрын

Thanks for the nice comments. You're lucky to have a wife that can do the painting. I didn't even try. I wound up replacing all of the handles and they kinda looked ok being the same black color. Smart idea using the small magnet. Hope you have a blessed holiday season. Merry Christmas and Happy New Year.

@blah064

7 ай бұрын

@@bestgirlsdad thanks and Merry Christmas and happy new year to you!!

How tutorial safe lives. This solved my challenge. Great tip. Thank you so much

Thank you for this! We fixed my son's door handle in less than 5 minutes!!

Thanks for sharing! I was able to duplicate and repair without a mechanic!

Great job on this video. Thank you so much for sharing the pvc tip too.

Very professional way to show and explain it. Thanks so much.

@bestgirlsdad

5 жыл бұрын

You're welcome. Glad it was helpful.

Well done. I also got a black handle on eBay and paint with clearcoat on the web. I hung the doorhandle using a piece of thread on a tree branch and spun it around to do the spray painting and the clearcoat. This technique worked like a charm. I had to use plenty of clearcoat to get it close to the clearcoat finish on the car.

@bestgirlsdad

4 жыл бұрын

Thanks for the painting tip...great idea. I would never have thought of hanging the handle to paint it.

If you don’t got any pvc pipe laying around like me, I was able to do this by rolling up a piece of paper and taping it to catch the bolt, worked just fine but the pvc woulda definitely been better. Great guide

@bestgirlsdad

3 жыл бұрын

Thanks. Good idea on the rolling up the paper. You just gave me an idea. I'll bet you could also use the cardboard roll from inside a roll of toilet paper or tin foil. Just cut it long ways and roll it up to the diameter you would need. Hope you have a blessed day.

Thank you for the clear instruction sir. fixed my car handle in 20mins.

@bestgirlsdad

3 жыл бұрын

Hi Rizwana. You're welcome. Thanks for the nice comments. Hope you have a wonderful day.

You saved me so much money, I had 3 handles break off my Haundai, drivers side handle is only one that hasn't broke "yet" so I bought one for when it does too.... Lol ... Thank you so much ....

@bestgirlsdad

Жыл бұрын

You're welcome. Glad that I was able to help.

Thanks! Excellent video, no issues replacing handle.... Bought Duplicolor spray paint at O'Reilly's for perfect match. Also used plastic adhesion Promotor and clear coat...

@bestgirlsdad

Жыл бұрын

Glad the video was helpful. I left the handles black. I'm not a paint guy. But, I might give it a try on your recommendation for O'Reilly's and the clear coat. Thanks.

Thank you! I can now confidently order the parts and fix my broken door handles.

@bestgirlsdad

Жыл бұрын

You're welcome. Thanks for the nice comment. Glad that my video was helpful. Hope you have a blessed day.

looks pretty easy to do.thanks for the video

great post took 5 mins to replace handle! I saved my uncle a ton of money hyundai told him they would have to remove door panel to replace lol @ $100.00 labor!!! And i like your piece of PEX pipe hugh time saver!!

@zdavidzz

3 жыл бұрын

It's crazy to think who came up with these evil satanic crazy ass corrupt & greedy fkn rates!!!!!!!!!!!!!!!

Wow. GREAT video. You're a great teacher

@bestgirlsdad

3 жыл бұрын

Thank you.

Thank you so very much, I did it myself because of your vid.

@zdavidzz

3 жыл бұрын

lol gosh these things are breaking left and right!

Thx u so much! I'm ordering right now!😀

The PVC pipe is genius. I used a piece of thin cardboard to catch the screw when I changed my car's handle but I was worried about it flexing and losing the screw. This solves that concern.

using a pipe is good idea. Thank you for shearing this video.

@bestgirlsdad

5 жыл бұрын

You're welcome. Glad to help. The pipe wasn't my idea. I saw a video where another guy used it. I wanted to give him credit and put a link to his video, but I can't remember where it is.

Thanks for video brother! Like the PVC tip!

@bestgirlsdad

7 ай бұрын

You're welcome. Glad it was helpful. Hope you have a blessed holiday season. Merry Christmas and Happy New Year

You make this look so easy i will give it a try haa i am so nervous doing this but your video here is awesome an i picked the part up for 6 bucks haaa thanks so much.....

@bestgirlsdad

2 жыл бұрын

You're welcome. Hope that it worked out and you got the new handle on.

@michellecoleman2020

Жыл бұрын

@@bestgirlsdad sure did thanks haaa

Great Video and very precise!

@bestgirlsdad

4 жыл бұрын

Thank you for your compliment. Hope that you all have a Happy Thanksgiving and blessed holiday season.

Very detailed and helpful🎉

The PVC for the rear doors worked like a charm

@bestgirlsdad

4 жыл бұрын

Glad it helped. I wish I could remember the guy whose video I watched where I got the idea...so, I could give him credit. It's sure a lot easier than accidentally losing the bolt down into the door. Before I put the PVC in, I was trying to figure out what size the socket was, and I knocked it off the extension when pulling it out...my door has a socket in it now. I've learned my lesson. When I now have to put a socket deep into something, I tape it to the extension so it can't come off.

Thank you for the thorough explanation!

@bestgirlsdad

3 жыл бұрын

Hi Jah. You're welcome. Glad to to help.

What tool is that you used for the bolt? The name is on the top of my tongue but I can’t think and where did you get the pipe? What size bolt remover did you use

Saved me a lot of time. However I didn't have the correct size PVC pipe so I used a piece of cardstock rolled it up and slid it in. Worked out fine.

@bestgirlsdad

3 жыл бұрын

Hi Dave. Cardstock...that's a great idea! You got me to thinking. I wonder if you could also use the cardboard tube from a roll of toilet paper? You'd just have to cut it long ways and roll it up to fit in the hole. Hope you have a blessed day.

@zdavidzz

3 жыл бұрын

Cardstock paper is only for the elites!

@zuck9090

2 жыл бұрын

Nice thinking

Omg! Thank you so much for this video!

@bestgirlsdad

3 жыл бұрын

You're welcome. Glad it was helpful.

Thanks! Great idea with the pipes! Shoulda watched this video first... I dropped the driver side lock bolt in the door. Not worth taking the door apart to find it, so I'm gonna buy a new bolt at the hardware store. Also, it seems like once one plastic part breaks in this car, all of them do in rapid succession. Cheap plastic, I guess. Both driver side handles, various interior components, and the plastic part that attaches the cable for the door elevator mechanisms for the two rear windows all broke within a month or two of each other.

@AliciaDH

3 жыл бұрын

Yes, the same thing happened to me on the drivers side with both doors.

Excellente Idea. Thanks Buddy!

@bestgirlsdad

Жыл бұрын

You're welcome. Thanks for the nice comment.

Thanks for the help! Much appreciated!

@bestgirlsdad

2 жыл бұрын

You're welcome. I'm glad that this was helpful. Hope you have a blessed day.

Great Video , THANKS

Thank you! 2nd handle to fall off so far. Hopefully the last!

@bestgirlsdad

3 жыл бұрын

You're welcome. Glad this was helpful. I also had two handles break.

Awesome my friend 👍

@bestgirlsdad

5 жыл бұрын

Thanks

I need to do this to my 2007 on the driver side door. The small piece that has to be removed has the car lock on it. Is the removal process still the same?

@bestgirlsdad

2 жыл бұрын

Hello. I also replaced the handle on the driver side door that had the lock. I wish I could remember back exactly how it worked. But, I know that I didn't have a problem. It loosened up enough for the handle to come off, and then put the new handle on.

Definitely was helpful ‼️

@bestgirlsdad

2 ай бұрын

Thanks for the nice comment. Glad it was helpful. Hope you have a blessed day.

Great job,thanks

I don't have the gaskets that you said not to lose. Do I need to source them somehow?

@bestgirlsdad

Жыл бұрын

Hello. On my car, the gaskets were already on the door. They do not come with a new handle. I mentioned not to lose them because they can fall off, which one of mind did. I would check to see if they are still on the door. If not, and it was me, I probably would put the new handle on without worrying about it just to be able to open the door. They probably are there to help seat the handle and keep the weather from getting in behind the handle. You could check with Hyundai or on e-bay to see if any are available. Hope that this helps.

What size is the bolt?

I'm going to do this tomorrow my handle didn't come with the white clippie thing. Will the handle still work? Man, I hope 🙏🏽 so.

@monarch2tyrant759

7 ай бұрын

did it work

I dropped the bolt into the interior of the door. Now I can't get it out, and can't find the right bolt anywhere. Any tips? Thanks in advance.

@bestgirlsdad

3 жыл бұрын

Hi Justin. So sorry that I didn't see your comment and get back earlier. I found extra bolts at one of our salvage yards here. We have a U-Pull-It. I needed an extra bolt and got one off a junked Sonata.

My handle broke off in my hand so I can’t open the door. Please help

I'm about to do this as both my rear handles are broken. Is the bolt not ferrous? Could I not just use a magnet in the socket instead of some PVC that I will likely never use again?

@bestgirlsdad

2 жыл бұрын

Hi Justin. I'm not sure if the bolts are ferrous or not. That is a good question. A couple weeks ago, TW made this comment: "Nice vid i just replaced 2 handles. However that pipe concept is not necessary. You just need to push on this 8mm screw and replace the handle while holding/pushing the screw so it doesn't go down. Wrench socket needs to be ducktaped for safety. Thx." This is a good idea. I sure agree with taping the socket to the extension. I lost one socket down in the door as I knocked it off the extension pulling it out. Also, I read a comment on another video like mine where the person said that you could unscrew the bolt just enough to get the handle free. The bolt actually doesn't need to be fully screwed out, and will stay in place when you take the handle off. I can't confirm this, but sounds logical. Thanks for watching.

@ramrod126

2 жыл бұрын

@@bestgirlsdad Wow, I was hoping for a reply but not actually expecting one on a 4 year old video. Thank you very much for the information. I ordered a 4 pack of handles from ebay for 17 bucks. I think I am going to replace all for so all the handles match. I don't feel like painting them.

@bestgirlsdad

2 жыл бұрын

@@ramrod126 I didn't paint mine either. I have the four black handles. I kinda like the look.

I have a 2009 Hyundai Sonata. Both exterior and interior door handles are broke on the drivers side door . I can't open the door. What is the best way to cut out the door panel to unlock the door and replace the handles?

@bestgirlsdad

5 жыл бұрын

Sorry, but I have no idea how to help. I tried using a coat hanger to open the door, sliding it down the window, but couldn't get it to open. I can get the plastic off from around the interior door handle. There is one screw holding the plastic on. Maybe you could take this off and have some room to get something in the door to pull on the mechanism to unlock it.

@catnip2906

5 жыл бұрын

@@bestgirlsdad a locksmith finally got it open i took off the inside lock and he took a pair of pliers and pulled the cable attached to the door lock.

thanks, brilliant. my exe's door handle just snapped off.

@bestgirlsdad

8 ай бұрын

You're welcome. Thanks for the nice comment. Hope you have a blessed day.

This is so simple!

@bestgirlsdad

4 жыл бұрын

Thanks. Glad it was helpful.

What about drivers door?with lock is that harder

@bestgirlsdad

Жыл бұрын

Hello. I did replace the driver's side door handle and do not remember having any problems. I might not have pulled the piece with the key insert all the way off. It's been a while since I did this so my memory on the driver's side door is not there. Thanks for watching. It shouldn't be a problem.

does this work on sliding minivan door?

@bestgirlsdad

4 жыл бұрын

Hi. Happy New Year. I have no experience with doing this on a minivan door. I wish I could tell you something, but I have no idea.

Good job

@bestgirlsdad

5 жыл бұрын

Thanks.

Great video. Will save me from having to pay mechanic. Thank you.

@bestgirlsdad

5 жыл бұрын

You're welcome. Hope that you have a nice holiday season.

@zdavidzz

3 жыл бұрын

If I was a mechanic I would have charged you zero and made a metal version that never broke!!!!!!!!!!!!!!!!!!!! AMERICA RULES!

I used a copper pipe too get too the inside screws and attach the new one after losing 2 screws in the door!

Thx!

I was ready to give you all kinds of phrase, except that you dodge a very difficult part: the driver side has a lock not just an open spot there. How do we get around the lock?

@JohnTaylor-it3kp

5 ай бұрын

I see someone else saying that it’s the same thing, but when I pulled the plug out, I saw the lock mechanism in the way

@bestgirlsdad

5 ай бұрын

Good morning. It has been so long since I did this, I can't remember exactly. But, I know that it wasn't an issue. I think the lock mechanism either came right out, or could be moved out of the way. Thanks for the good comment.

I’m trying to do this myself as a single mom😒😒. I gave my teenage my old car and the handle is missing, but he removed the other pieces of the handle( the one that you said don’t remove.) where can I find those parts and what are they called? Thanks from a single mom with a ungrateful teenager son😒😒🤣

@bestgirlsdad

3 жыл бұрын

Hi Angela. I'm not sure exactly what parts you mean. Are you missing the two rubber type gaskets, or all the handle pieces? If you could post a picture of what the door looks like now, I can better answer your question. Thx

Excelente

@bestgirlsdad

7 ай бұрын

Thanks.

gooooooooood

PErfect the pvc tube

I just tried and dropped the screw😬

I'm going to rebel, I'm going to take the original (broken) handle and make a custom metal hook that will not fail that will grab that door cable!

👌🌹

Awesomeness thank you

I totally dropped the bolt and lost it in the door haha

@bestgirlsdad

8 ай бұрын

On my first try, I did the same thing and lost the bolt in the door. I went to our local salvage yard and got a replacement bolt off a wrecked Sonata. Thanks for the comment. Hope that you have a blessed day.

Mine was not 8mm ! It's a 10mm.

@gk10002000

4 жыл бұрын

10mm on my 2008 kia sorento

@irishmike39

4 жыл бұрын

great video but it is not 1/2 ich pvc it is 1 ich or 1 1/2 inch.

Mine was 10 mm!

@bestgirlsdad

5 ай бұрын

Yes. Seems like some are 10 mm and some 8 mm. Maybe it is just where the cars were manufactured? Thanks for the comment. Hope you have a blessed day.

I used a cardboard tube and lost the nut

@bestgirlsdad

7 ай бұрын

My first try at this, I lost the nut too. I went to a salvage yard and got one off a wrecked Sonata. Hope that you have a blessed holiday season. Merry Christmas and Happy New Year.

I can tell just by the way that plastic shit was designed it was designed to fail repeatedly !

I'm going to have to do this. But I'm going to try to rig up something better than what they made to begin with instead of replacing it withthe same cheap, defective piece of plastic shit

@bestgirlsdad

5 жыл бұрын

Please let me know if you figure out something better.

@bestgirlsdad

5 жыл бұрын

I was watching a Scotty Kilmer video about plastic parts. At the 2:40 mark, he talks about the cheap plastic door handles. kzread.info/dash/bejne/aoGhuquTgNuqZ6Q.html

@MGarrison

5 жыл бұрын

@@bestgirlsdad it's not pretty. But I took baling wire and wrapped around the trigger on the inside and around the old door handles and just put them back in there.It's very simple to do and it has lasted now for about 3 weeks with no issues. This is one of the stupidest factory defects I've ever seen. We broke off three of them in a very short time and the 2010 Hyundai we got now only has 67,000 miles on it and had 55 when we got it.