I had my loader going to the hobby shop for repairs about 8 times for the same problem a wire of the bucket servo keeps stopping then different wires in between the two sections of the loader. Terrible experience.

Great video..u make that look so easy...now I think I know how to put a driver in the cab...take it all apart

@toolxtoy

4 жыл бұрын

Thank you for watching~~~

My son has a problem where there is no light on his controller and can’t control his device - can you advise how to fix the remote control, please?

Thank you.

Great job!!

@toolxtoy

4 жыл бұрын

Thank you for watching~~~

@MrKeys57

4 жыл бұрын

@@toolxtoy i got mine today, but steering was broke..:( the seller offered to drive here to give me a new one!, Levi

👏👌🙏😉👍🖐️. Nicolas from France

Good

The center servo on our bucket is extremely weak. Worked for half a day properly. Any suggestions ?

@toolxtoy

4 жыл бұрын

Thank you for watching. I agree with you. But I haven't found a solution about that problem yet. Sorry~.

Well it uses linear electric activators as I thought it uses hydrolic activators as in some models...it's build of plastic but still with bearings n servos its well build is considerably good...

@toolxtoy

4 жыл бұрын

Thank you for watching

Hi, it is really weak when pushing in. Is it possible to upgrade the motors and also a way to get the rear wheels to turn and help push with the front wheels. Might help make it stronger. Thanks Mickus

@toolxtoy

4 жыл бұрын

Thank you for watching and your good advice. I agree with your opinion.

@Mickus79

4 жыл бұрын

원스토이Won's Toy Thanks, yeah wondering if you know if can upgrade the motors ? Or a a way to get all for wheels to push ? Like maybe wiring the motor power wire at all ? Thanks Mickus

@toolxtoy

4 жыл бұрын

@@Mickus79 I'm sorry, unfortunately, I have not yet found a suitable motor and solution. If I find a solution, I'll let you know

Hello i am having the same problem, But when i use the left and right trim it works up and down,( only with the trim). i could not make it work with the right joystick up and down.

@toolxtoy

3 жыл бұрын

Thank you for watching. I think most of the problem of not working in the toy is the bad connection between the pcb board chip in the remote controller and the wire (solder, broken wire). Open the remote controller and check the soldering status of the pcb board, chip, and wire.

How to get spare battery. Mine stop on account of dead battery 🔋 will not restart after charging the battery??? Do you know why??

@toolxtoy

Жыл бұрын

I think you can buy batteries for huina 583 at aliexpress.com

mine keeps getting stuck in reverse an I can't figure it out

👍👍👍👍🇹🇭

Good!! But I don’t know where I can get a spare part???

@toolxtoy

4 жыл бұрын

Sorry, I'm searching a spare part. too. But i cannot find it.

@adibrashid3050

4 жыл бұрын

원스토이Won's Toy owhhh, tq sir

Which motor you have seen in this job??

@toolxtoy

3 жыл бұрын

Thank you for watching. The motor is originally installed on1583 wheel loader.

알리발 4~6v 경광등 추가하려는데 pcb 어디에 적당한 전압을 끌어올데가 있을까요?

@toolxtoy

3 жыл бұрын

상시로 키는거라면 배터리가 연결되는 선에 연결하면 될거 같은데요. 버튼 눌러 동작하게 하려면 제생각에는 사운드 스피커선 전압측정해보시고 연결하면 될수도 있겠다는 생각이 드네요. 많은 도움이 되지 못해 미안해요~

@kikafeilong5860

3 жыл бұрын

@@toolxtoy 친절한 답변 감사드립니다. 도움 많이 됐습니다.

이거배터리 충전식인가요? 저도살거라...

@toolxtoy

4 жыл бұрын

7.2v 배터리 충전식이예요.

@user-iv1oj7mj7s

4 жыл бұрын

@@toolxtoy 감사합니다 근데 앞에불도저처럼 달린포크래인 어떻게조정하는지좀..알켜주세요

@toolxtoy

4 жыл бұрын

@@user-iv1oj7mj7s 앞에 불도저 달린 포크레인은 제가 부품들 사서 직접 만든거고 별도 조종기와수신기를 달아서 조종합니다.

제 포크레인도 작동이 않돼요ㅠㅠ

@toolxtoy

3 жыл бұрын

안녕하세요. 대부분 전선 단선 또는 납땜부 떨어짐 등으로 동작불량이 발생되는거 같으니 분해해서 확인해보는것도 괜찮을 것 같네요~~

直隆い～(笑う)