Great job 👍👍

@rc4ever43

2 жыл бұрын

Thanks and thanks for watching!!

Hi, How install beacon light in Huina 1583...??

@rc4ever43

Жыл бұрын

Hi.. I swapped the board out for Flysky receiver but you can plug it into the battery on your stock Huina. The only difference is that it will come on when you turn on the power and you will not be able to switch the flash pattern because you will not be using the 3rd wire.

@techportnet

Жыл бұрын

@@rc4ever43 thanks for information friend 🙏

@drzflyest4

26 күн бұрын

​@@rc4ever43do you have a video on that?

@rc4ever43

26 күн бұрын

I’m working on putting the video together. I will upload it to the channel. Thanks.

What upgrades did you do to the loader?

@rc4ever43

11 ай бұрын

I swapped the stock receiver and transmitter with a Fly Sky set up. I added a 3s hobbywing esc for the throttle control and it is now running on a 3s battery. I added a 35kg steering servo for steering. I added extra weight to the body and wheels. I cut out the rubber in the middle of the tire tread and removed the hard plastic inside of the tire to make the tires softer and made the battery compartment on top in the rear of the loader.

@lexsteel12

3 ай бұрын

​@rc4ever43 I don't suppose you made a video on how to swap out the stock electronics for the Hobbywing and flysky setup? I want to do the same mod to mone. But, I thought swapping out the ESC was a little more complicated than I feel comfortable doing. Thanks.

@rc4ever43

3 ай бұрын

I can work on doing a video that will show you how to do it all.

@anselmmazza4344

2 ай бұрын

@@rc4ever43 I would like to see as well, I am done with this stock receiver.