Пікірлер

• 
  @drzflyest46 күн бұрын

  What sound kit are you using?

• 
  @rc4ever436 күн бұрын

  Hi. I’m using the ESS Dual Engine Sound Simulator from Amazon. They also have a single speaker version for tight spaces. Thanks for watching!

• 
  @drzflyest46 күн бұрын

  @@rc4ever43 do you know of any sound module that also has the clacking from the tracks?

• 
  @rc4ever436 күн бұрын

  Yes. I just bought one for my Volvo excavator from Toucan Hobby. They have a group on Facebook.

• 
  @drzflyest46 күн бұрын

  @@rc4ever43 what is the module called and what is the fb group name?

• 
  @rc4ever436 күн бұрын

  Group name is Toucan Hobbies. I don’t know the model name but they can tell you once you tell them what you’re looking for.

• 
  @jgminiaturas831919 күн бұрын

  Brasil 🚛🚜👍

• 
  @jgminiaturas8319Ай бұрын

  Brasil 🚜🚛👍👍

• 
  @Japoprostu3 ай бұрын

  🎉

• 
  @djuromaric72564 ай бұрын

  Very smooth digging, love it

• 
  @rc4ever434 ай бұрын

  Thank you and thanks for watching!!

• 
  @kurwinramsaran27435 ай бұрын

  At lease you have real dirt. In south Florida it’s all sugar sand. I have to buy dirt at Home Depot.

• 
  @rc4ever434 ай бұрын

  Yeah I know.. I brought back some of that Florida sand and I still have it. I too buy Top soil from Home Depot and I filter my dirt down to fine dirt. I remove all of the large particles from my top soil. The fine dirt is displayed in some of my other videos

• 
  @RcR.A.E.5 ай бұрын

  What sound unit is this?

• 
  @rc4ever435 ай бұрын

  Hey I’m not sure but you can get one from Toucan Rc Hobby if you tell them which model you have or send them a picture. They are on Facebook and in Facebook messenger their name is Toucanhobby.

• 
  @bushcraftjoe15 ай бұрын

  Pretty cool machine

• 
  @rc4ever435 ай бұрын

  Thanks !!

• 
  @thatsmyrc5 ай бұрын

  Looking good and works like a champ 👍🏼 I had plans to do the same yet never for around to finishing it 🤷🏻‍♂️

• 
  @rc4ever435 ай бұрын

  Thanks man… I need a printer soon. I have some ideas to discuss when you have time soon:

• 
  @clydeterry22896 ай бұрын

  🤔🤔🤔🤔 With that much Dirt DOT will stop him. They will pull out the scales.😂😂😂😂😂

• 
  @rc4ever435 ай бұрын

  Yeah I believe so 😂😂😂

• 
  @thatsmyrc6 ай бұрын

  👍🏼

• 
  @rc4ever436 ай бұрын

  Hey.. thanks man!

• 
  @bulldozer19086 ай бұрын

  👌🔥💯🙌

• 
  @rc4ever436 ай бұрын

  Thanks!

• 
  @jasonlange83416 ай бұрын

  I love it bro!! This was my intention too build this. Had it built and went another way. It's now a towtruck!! With a plow

• 
  @rc4ever436 ай бұрын

  Hey thanks! I’d love to see your tow truck. I have a group that I started on Facebook that you can join called Rc 4ever and send it or my email [email protected].

• 
  @workhome16566 ай бұрын

  Love RC Bulldozer the power 💪🤗

• 
  @rc4ever436 ай бұрын

  Thanks!

• 
  @fijiryder6 ай бұрын

  Where you get the trailer from

• 
  @rc4ever436 ай бұрын

  I made the blue trailer and the flat trailer. The yellow trailer is from Bruder and I got it on Amazon. Thanks for watching!!

• 
  @kennethreed11236 ай бұрын

  Where can I buy that snow plow

• 
  @rc4ever436 ай бұрын

  Amazon. It’s made by Bruder.

• 
  @kennethreed11236 ай бұрын

  @@rc4ever43 thank you

• 
  @doranbryan20987 ай бұрын

  What are you using for a pintle on the truck? Having issues trying to find a nice way to pull that trailer

• 
  @rc4ever436 ай бұрын

  I just used a screw and nut. The screw fits the hole on the trailer hitch on the truck.

• 
  @doranbryan20987 ай бұрын

  Went and bought a truck after watching these vids. But that plow is impossible to find. I’m in New England. Would love to have some fun with one

• 
  @rc4ever437 ай бұрын

  You can got Amazon and search for Bruder plow / snow plow and you should see them.

• 
  @doranbryan20987 ай бұрын

  Which do you like better? The western star or the blue Mack?

• 
  @rc4ever437 ай бұрын

  Hey. That’s a tough question because I actually like them both a lot. If I were to lean towards one more it would be the blue Bruder Mack and only because I converted it myself from toy to fully functional Rc. It also has suspension so it maneuvers better over uneven terrain. The Western Star is stronger or has more lifting power and it carries much more of a load. It also looks good as far as a scaled look when running with the rest of the fleet. It’s a really tough decision!

• 
  @shevrav12397 ай бұрын

  i dont work for osha so i dont know, but ,that loader seams real close to that large gas line, should you have a flagger or something, i could come over and supervise

• 
  @rc4ever437 ай бұрын

  You are right 😂😂😂 we are working on a new budget that will allow for more help in the future 😂😂😂

• 
  @shevrav12397 ай бұрын

  could not believe you transport heavy equipment around like that without properly securing the load and then hot roddin around the living room , and on the carpet , will have to look around for a bit more professionalism,, but seriously i would love to come over and play with your toys, i can give you my wifes phone number, and she can let you know when i have free time [ if im good ]

• 
  @rc4ever437 ай бұрын

  I will work on doing better now that we have better equipment to work with 😂. Thanks for watching!!

• 
  @CLAUDIOSRC95297 ай бұрын

• 
  @jeffmartin7907 ай бұрын

  How does the plow go up and down? Was that a feature you added or did it come like that?

• 
  @rc4ever437 ай бұрын

  Hey. I added a servo to make the blade go up and down. I had a previous video with a Cen Ford F-450 with the same plow that I made go up and down using a winch. This winter I added another servo so now the blade will go up, down and left to right.

• 
  8 ай бұрын

  Nice loader! Have you links for buying linear actuators? I made with 360 degrees servos years ago for mine but they broke😢

• 
  @rc4ever438 ай бұрын

  I get most of my part through Amazon.

• 
  @thatsmyrc8 ай бұрын

  Line the inner sidewalls of the bed of truck with some thin plastic sheeting. Lexon clear etc, can get it Hobby lobby or anywhere pretty much . Even yard sale signs lol. It will help the material from sticking, it will slide right out 👍🏼 looking good buddy.

• 
  @rc4ever438 ай бұрын

  Ok.. thank man! I will look into it right away. I just thought about checking with you yesterday to see what you had left lol.

• 
  @mcemtpockets17758 ай бұрын

  Thats a nice dozer man and a really nice set up

• 
  @rc4ever438 ай бұрын

  @mcemtpockets1775 thanks and thanks for watching!

• 
  @mcemtpockets17758 ай бұрын

  Wow!!

• 
  @rc4ever438 ай бұрын

  Thanks and thanks for watching!!

• 
  @The-Warm-voice13599 ай бұрын

  Perfect small project Excellent work👍 But i see you make the pump running why don't do pump on demand it's best way for the pump life and battery life too and make the pump ratio 40%

• 
  @rc4ever439 ай бұрын

  Yeah I switched it on for a few seconds but it is set for on demand. You have a good ear 😂 and thanks for watching!

• 
  @mcemtpockets17758 ай бұрын

  They run smooth. Yep. Hyrda! Sweet stuff man. Lots of time u have given😊❤

• 
  @phoenixsui10 ай бұрын

  Plowing snow in a big RC model, a childhood dream, i recently realized that those things now exist and sometimes even in high quality. Love it.

• 
  @rc4ever4310 ай бұрын

  You are absolutely correct and I have been wanting to do this for a while. I will be working on making my zero turn lawnmower remote controlled soon. I have a few more snow plow videos with different truck on the channel. Check them out since you like this one! Thanks for watching!!

• 
  @RcR.A.E.10 ай бұрын

  I always want to dig at night but wverytime I do the mosquitoes are unbearable!!!

• 
  @rc4ever4310 ай бұрын

  Yes they are lol.. but I pushed through it lol

• 
  @RcR.A.E.10 ай бұрын

  @rc4ever43 I'll always put out these green coil things your burn and the smoke keeps em a decent distance. I think it's a Canadian thing I was talking about them and a friend from the states had never heard of or seen em.

• 
  @rc4ever4310 ай бұрын

  Yeah.. I try all kinds of stuff to keep them away but they always seem to fight through whatever I use. I think that I got lucky that night that I was recording but I don’t do much at night outside because of the hassle lol

• 
  @huge_balls10 ай бұрын

  What upgrades did you do to the loader?

• 
  @rc4ever4310 ай бұрын

  I swapped the stock receiver and transmitter with a Fly Sky set up. I added a 3s hobbywing esc for the throttle control and it is now running on a 3s battery. I added a 35kg steering servo for steering. I added extra weight to the body and wheels. I cut out the rubber in the middle of the tire tread and removed the hard plastic inside of the tire to make the tires softer and made the battery compartment on top in the rear of the loader.

• 
  @lexsteel122 ай бұрын

  ​@rc4ever43 I don't suppose you made a video on how to swap out the stock electronics for the Hobbywing and flysky setup? I want to do the same mod to mone. But, I thought swapping out the ESC was a little more complicated than I feel comfortable doing. Thanks.

• 
  @rc4ever432 ай бұрын

  I can work on doing a video that will show you how to do it all.

• 
  @anselmmazza43442 ай бұрын

  @@rc4ever43 I would like to see as well, I am done with this stock receiver.

• 
  @mcemtpockets177511 ай бұрын

  Nice!

• 
  @rc4ever4311 ай бұрын

  Thanks!!

• 
  @Saler-jb3jq Жыл бұрын

  what is the trailer called? with the dirt machine

• 
  @rc4ever4311 ай бұрын

  That is a Bruder trailer. You can get if from Amazon.

• 
  @Saler-jb3jq Жыл бұрын

  What is the trailer called

• 
  @rc4ever439 ай бұрын

  It is a 1:16 Bruder trailer . You can find it on Amazon.

• 
  @techportnet Жыл бұрын

  Hi, How install beacon light in Huina 1583...??

• 
  @rc4ever43 Жыл бұрын

  Hi.. I swapped the board out for Flysky receiver but you can plug it into the battery on your stock Huina. The only difference is that it will come on when you turn on the power and you will not be able to switch the flash pattern because you will not be using the 3rd wire.

• 
  @techportnet Жыл бұрын

  @@rc4ever43 thanks for information friend 🙏

• 
  @drzflyest42 күн бұрын

  ​@@rc4ever43do you have a video on that?

• 
  @rc4ever432 күн бұрын

  I’m working on putting the video together. I will upload it to the channel. Thanks.

• 
  @thatsmyrc Жыл бұрын

  👍🏼

• 
  @fnkrc1393 Жыл бұрын

  Love you Amazing bro

• 
  @raymondsutton4395 Жыл бұрын

  Where can I get those toys you have a phone number to call or a book you can send me to show what you have and the price of your toys

• 
  @rc4ever43 Жыл бұрын

  Hi.. I get them all from different places. You would have to be a little bit more specific on what you are looking for in order for me to point you in the right direction.

• 
  @raymondsutton4395 Жыл бұрын

  Do you have a book on. Your toys, a catalog so l could pick some out??

• 
  @rc4ever43 Жыл бұрын

  You can get most of them through Amazon. I have the names of all of them in the video header. All you have to do is type the names in the search on Amazon.

• 
  @canalhicoes3905 Жыл бұрын

  Sensacional 👏🏻👏🏻👏🏻

• 
  @rc4ever43 Жыл бұрын

  Thanks

• 
  @mcemtpockets1775 Жыл бұрын

  Nice toys my man

• 
  @rc4ever43 Жыл бұрын

  Thanks! Hopefully you are enjoying my videos.!!

• 
  @androsborsato Жыл бұрын

  did you do the transmitter mod? you have nice finesse using blade while driving

• 
  @rc4ever43 Жыл бұрын

  Hi.. yes I did swap the transmitter and receiver in a later video. I also added escs to make everything proportional.

• 
  @rc4ever43 Жыл бұрын

  Here is the video with the modifications Rc 4ever...The upgraded Huina 1569 cleaning up the construction site kzread.info/dash/bejne/q31omMyCltnFobQ.html

• 
  @rc4ever43 Жыл бұрын

  Thanks.. I had lots of practice with the model before recording 😂

• 
  @workhome16566 ай бұрын

  Hello 🤗

• 
  @mcemtpockets1775 Жыл бұрын

  I watched most of ur clips. U have some intresting stuff! Thanks for sharing and thanks for the motovation!

• 
  @rc4ever43 Жыл бұрын

  Hey.. thanks!! That’s always good to hear because there is a lot of time, effort and money that goes into this hobby. It’s always great to talk with someone else that enjoys the hobby!! If I can help with anything just let me know!

• 
  @mcemtpockets1775 Жыл бұрын

  That blue prime mover... is that a DCM or Tamiya?

• 
  @rc4ever43 Жыл бұрын

  That model is from DCM 1:16 scale but click on the link below for my Tamiya 1:14 scale Semi. Rc 4ever...Tamiya 1/14 scale Cascadia Semi Hauling my cars and trucks kzread.info/dash/bejne/hnWImNuRY6jIltY.html

• 
  @mcemtpockets1775 Жыл бұрын

  Bruder trailer looks good on the Diecast Masters

• 
  @rc4ever43 Жыл бұрын

  I used the Bruder before Diecast came out with the lowboy trailer. There is a video for that on my channel also.

• 
  @mcemtpockets1775 Жыл бұрын

  Wow. Cant beleive i just found ur page and work! Nice inside course! I sub'd!😊🙏👍🦾

• 
  @rc4ever43 Жыл бұрын

  Hi.. who is this by the way? Thanks for watching and subscribing!!

• 
  @mcemtpockets1775 Жыл бұрын

  @@rc4ever43 sorry my man. Im empty pockets! A little old mid to late 50s.. Fell or pushed back into the RC world after a life exp... Just having fun with RC and enjoying life to the fullest! thats all my man. Sorry about not introducing myself.

• 
  @Pantano0 Жыл бұрын

  Buena modificación 💪

• 
  @rc4ever43 Жыл бұрын

  Thanks and thanks for watching!!

• 
  @AVilleRC Жыл бұрын

  Good day That's a nice piece of equipment you have there sir.

• 
  @rc4ever43 Жыл бұрын

  Thank you sir!! I enjoy building them now.

• 
  @keithwilliams9955 Жыл бұрын

  Looking good looking good

• 
  @rc4ever43 Жыл бұрын

  Thanks man!

• 
  @thatsmyrc Жыл бұрын

  👍🏼 nice build

• 
  @rc4ever43 Жыл бұрын

  Thanks!!

• 
  @Pantano0 Жыл бұрын

  Muy buen sonido ambiental y un 10 a la modificación 💪👏👏👏 enhorabuena.😊

• 
  @Pantano0 Жыл бұрын

  Buen diorama 😊😊😊

• 
  @rc4ever43 Жыл бұрын

  Thanks and thanks again for watching!!