Hp 285 g3 can support 4k display through it's hdmi port

@HPSupport

2 жыл бұрын

+Sher Ali That is debatable. Most likely, its limited to what ever your Vega Graphics. But why will it matter? VGA is an old analog signal and your 4K tv or monitor is going to be an HDMI digital input.

hp 285 pro g2 mt can i upgrade to ryzen 3 3200

I am not able to open the case of this pc kindly guide how to open it, Thanks

@HPSupport

2 жыл бұрын

+Jayaaditya Jadhav Please refer the user manual of your computer to know about removing and replacing the parts: bit.ly/3qjmSxR

Is SSD compatible with the HP 285 Pro G1 MT model?

@HPSupport

Ай бұрын

Hi there, thanks for contacting HP Global Social Media Support! I understand that you need to know whether HP 285 Pro G1 Microtower PC support SSD. I will do my best to assist you. It only supports SATA 3.5-in 6Gb/s HDDs* 500 GB 7200 RPM SATA Hard Disk Drive 1 TB 7200 RPM SATA Hard Disk Drive Regards, HP Support

Do you have a video or advice about how could I add more fans because I have the same motherboard? I just changed the cpu case. Thanks

@HPSupport

3 жыл бұрын

+Sean Ancot HP does not recommend upgrading or downgrading hardware parts or software that is bundled with the product as It may affect the manufacturer's warranty and performance, however, you could change the configuration at your own discretion.

i have hp 280 g2 mt business pc and it is windows 7 how can upgrade into windows 10

@HPSupport

2 жыл бұрын

Hi Chinnu, thanks for contacting! I understand that you want to know about upgrading the operating system from Windows 7 to 10. I will do my best to assist you. Install Windows 10 on a PC that came with Windows 8.1 or Windows 7 using the instructions in this document. bit.ly/2w1tTqQ Please let us know how it goes. Binu - Social Media Tech Support

Hp 285 pro g1 mt I am using this pc how many gb graphics card is supported. How can I upgrade windows 7 to 8 offline Pls tell

@HPSupport

3 жыл бұрын

+Manju's Special dishes This computer supports AMD Radeon HD 8350 1GB FH PCIe x16 GFX. Please refer this document to know about upgrading from Windows 7 to 8: bit.ly/2Uf5Qnz

How to use the sd card reader

@HPSupport

2 жыл бұрын

+stream gamer glowen Please refer this document to know about using memory card readers: bit.ly/2FWJwCi

Hey HP,Im planning to buy this,the i3 6100 one,the question is,If i slap GTX 1650 in the motherboard would it boot?(not black screen) And upgrading psu aswell? The model is hp 280 g2 Im aware if the Bios didnt support the 1650 thats why i need to ask from the Master.

@HPSupport

4 жыл бұрын

+Didi Graal HP does not recommend upgrading or downgrading hardware parts or software that is bundled with the product as It may affect the manufacturer's warranty and performance, however, you could change the configuration at your own discretion.

@SSPear66

4 жыл бұрын

@@HPSupport So it will support? Because i heard some HP motherboard whitelisted GPU. Thanks

Does the HP 285 Pro g1 Mt PC support 2 8GB 1866Hz ram and work as a dual channel?

@HPSupport

Жыл бұрын

Hi Rahu, thanks for contacting HP Global Social Media Support! I understand that you need to know about supported memory for your HP 285 Pro G1 Microtower Business PC Product I will do my best to assist you. Please refer 'Memory' under the specification page to know about the supported memory: bit.ly/3JGD6KR Binu_HP Social Media Tech Support

@RahulRaj-rs8cp

Жыл бұрын

@@HPSupport I appreciate the reply. I've seen this previously and would appreciate it if you could clarify whether the Kingston Hyper X Fury 8GB DDR3(HX318C10F/8) 1866 MHz RAM can be used as a dual channel with its full capacity.

@HPSupport

Жыл бұрын

Hi Rahul, thanks for contacting HP Global Social Media Support! Well, upon going the through the RAM specification, the maximum support for the system is 1600MHz. So, inserting a higher MHz RAM module will still work but ultimately it will get tuned down to 1600MHz even though your RAM module can go higher than 1600MHz. Akhil_HP Social Media Tech Support

@RahulRaj-rs8cp

Жыл бұрын

@@HPSupport Thank you for the clarification. So no matter the speed, it will work, right? I'll leave my system specifications below and kindly confirm that if I bought a pair of 8GB ram(the model that I mentioned in my previous comment), it would work fine on my system. CPU: AMD A8-6500 Mother Board: HP 2B4A

@HPSupport

Жыл бұрын

Thanks for getting back to me! Yes, it should work but as I mentioned previously, the RAM module will not perform to its maximum capacity and make sure you get 2 of the same RAMS and which has a similar spec to the stock RAM for better compatibility.\ Hope this helps! Akhil_HP Social Media Tech Support

Hello. I know my query isn't related to the video but I need help related to my HP G2 290 MT PC. When I plug in a video card (Gtx 1650) and start the PC, it doesn't boot. And when I put the cable into the motherboard output (while the gpu still plugged in) it doesn't boot up either. And when I take the Video card out. It boots up normally. How do I fix it?

@HPSupport

3 жыл бұрын

+Ikrama Asif To resolve the issue, you can use a video card that Secure Boot recognizes, or you can disable Secure Boot and enable Legacy Boot in the BIOS. This document explains how to disable Secure Boot and enable Legacy Boot: bit.ly/2uVqIDv

@ikramaasif2027

3 жыл бұрын

@@HPSupport Hello. Thank you very much for the response. Now I took out the ram sticks and plugged them back in again and it booted. But now the problem is that when connect my GPU with Displayport to the monitor. It says "no cable connected", and when I do it with hdmi it works. Should I try the same solution that you suggested for this problem as well?

You can change the components??

@HPSupport

4 жыл бұрын

+Jacui HP does not recommend upgrading or downgrading hardware parts or software that is bundled with the product as It may affect the manufacturer's warranty and performance, however, you could change the configuration at your own discretion.

I have another Question will this machine runs windows 11?

@HPSupport

3 жыл бұрын

+Andrew Avellino Aldous Please refer this document to know about upgrading to Windows 11 when it’s available later this year: bit.ly/3wZcw7m

where can i get the power supply for this unit?

@HPSupport

3 жыл бұрын

+Andrew Aldous I understand that you need to purchase power supply for your computer. You can purchase the power supply or any other accessories from here: www.hp.com/accessorize I hope this helps you!!

Price

@HPSupport

Жыл бұрын

Hi there, thanks for contacting HP Global Social Media Support! I understand that you need to know about the price of the parts. I will do my best to assist you. Use the HP Parts surfer to identify the part: hp.care/3YftVXU And order it via the HP Parts store: bit.ly/3nKMYrs Binu-HP Social Media Tech Support

PC Is good but only one thing I didn’t like the mic jack

@HPSupport

3 жыл бұрын

+shivansh Dubey Are you experiencing any issues with the microphone?

@neelamdubey12

3 жыл бұрын

HP Support their is no microphone jack in that PC that is bottom lack for gaming or buisness use and how can I get issues with without mic jack PC