I watched this in the middle of the night and then got out of bed to go in the garage and try this in my underwear. The rope worked good! Just had to feed a ton of it in there. Thanks

@kevinon4wheels

Ай бұрын

Awesome!!!

Thank you for making this video... I am from india and your video was very helpful for me... I appreciate you sir... And i like all the videos you make... Love from india ❤

Thank you Kevin!

@kevinon4wheels

Ай бұрын

You are very welcome

That string trick works great. I just used it lolol. Came off without any issues. It seems that all of my internal parts are great. We just have a fuel supply or electrical issue. I've ordered the valve setting tool, and have set the valves. I ran it about 4 to 5 months without doing that. It's supposed to be done more often for professionals vs once a year for HOs that only use them once a year. Lol.

@joshuabowkley3490

7 ай бұрын

I bought this 600 magnum off of a friend for 90, just bought 200 worth of parts, and tools. Probably just needed a new plug, and valves set.

@kevinon4wheels

7 ай бұрын

That’s great! Let me know how it works out

Thanks

@kevinon4wheels

7 ай бұрын

You’re welcome!

Thank you :)

Thank you very much. BR500. 2012. The nut holding the fan does not budge either direction. I have sprayed some PB Blater penetrating oil and will let it rest overnight. Tomorrow, I pull out my Milwaukee 1/2 inch monster impact driver, and turn it ANTICLOCKWISE without fear.

@kevinon4wheels

7 ай бұрын

You’re welcome! How did it go?

@facereader99

7 ай бұрын

@@kevinon4wheels Milwaukee 1400 ft.lbs new tool did not work. Saw on KZread everyone successful with breaker bar. So that is next.

@kevinon4wheels

7 ай бұрын

@@facereader99 I can’t believe that didn’t work. Breaker bar never fails!

@joshuabowkley3490

7 ай бұрын

Just do the string, rope or wire truck. I tried battery, corded electric, and an air impact. Since the fan, and nut are one piece, impacts don't seem to be able to break it loose.

@facereader99

7 ай бұрын

@@kevinon4wheels breaker bar is next. I used the string with Milwaukee 1400 ft lbs. Nothing.

stihl makes a tool that screws into the spark plug hole but the rope trick worked. I put the flywheel in my bench vise and reefed on it… don’t do that. A new fly wheel is $70 and I still ended up doing the rope trick.

@kevinon4wheels

7 ай бұрын

Glad the rope worked!

Gonna try this tomorrow. Got a wicked strong impact wrench and it won’t budge. Time for leverage. Thanks

@kevinon4wheels

7 ай бұрын

You bet! How did it go?

@nunyabisness4300

7 ай бұрын

@@kevinon4wheels too easy. I replaced the entire engine about 8 years ago. Should have rebuilt it. Worst part was that damn fan. Thanks for asking.

Is there away to take it off without rope

@kevinon4wheels

9 ай бұрын

There might be other ways where you can latch onto the crankshaft but this is definitely the easiest and safest way.

how is doing rope technique?plz explain it more

@kevinon4wheels

3 ай бұрын

Hello. If you have a thin rope, you can stuff it in the cylinder with the piston down. Then when you crank the bolt the piston will compress on the rope allowing the bolt to loosen but not cause any damage to the piston. Then you can pull the rope out. Just make sure you leave enough hanging out so you can pull it

@nima761

3 ай бұрын

@@kevinon4wheels appreciate sir, got it.

Mine just keeps spinning…

@kevinon4wheels

10 ай бұрын

Is the piston tight enough with the rope stuffed in there?