Removing a Smart 451 Gearbox Step-by-Step to change the Clutch Kit and Diagnosing why it wont Drive!

Комедия

Diagnosing why a Smart 451 MHD wouldnt drive. I pull the box out and show you how its done and what tools are needed!
Support here: www.amazon.co.uk/hz/wishlist/... 🙏🏼

Пікірлер: 85

  • @bhairu9
    @bhairu97 ай бұрын

    Thank you for doing this video & sharing. It explained to me why my Smart mechanic said the clutch is on the way out on my Smart4two and the repair will cost a minimum £1K.

  • @DrizzDevelopments

    @DrizzDevelopments

    7 ай бұрын

    Thats still quite a lot of money 🤔

  • @bhairu9

    @bhairu9

    7 ай бұрын

    Can I bring my car to you? @@DrizzDevelopments

  • @camel750
    @camel7506 ай бұрын

    Thank you for posting this video it is very helpful. You didn’t waste your time because the clutch was broken. Great little cars keep them alive 🤓

  • @mushyburgess8096
    @mushyburgess80964 ай бұрын

    Superb video, well narrated. So good to see a video compiled by someone with a working brain and a voice I can clearly understand. Shame you are on the other side of the country. All the best. My reason for watching your vid was, I was THINKING about buying a used Smart car - watching your vid was immensely helpful. Thank you

  • @DrizzDevelopments

    @DrizzDevelopments

    4 ай бұрын

    Thanks for the kind words :) Really appreciate it!

  • @tezzadezza9174
    @tezzadezza91748 ай бұрын

    My smarts gearbox (I think) is making a noise. I’m gonna use this video to put a new gearbox and clutch in - wish me luck 😅 thank you for this video 👍🏻

  • @DrizzDevelopments

    @DrizzDevelopments

    8 ай бұрын

    You’re more than welcome!

  • @herssonmartin3675
    @herssonmartin3675 Жыл бұрын

    What an amazing video I was engaged all the way to the end. Glad you were able to find the issue and get it up and running !

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Thanks mate. Appreciate the comment :)

  • @Greatglenway
    @Greatglenway4 ай бұрын

    Yep good video, thanks

  • @DrizzDevelopments

    @DrizzDevelopments

    4 ай бұрын

    no worries!

  • @nigelswann2873
    @nigelswann2873 Жыл бұрын

    Great detailed stripdown, that pressure plate was well shot, made a nice little car in the end.

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Its really nice TBH, Especially the free tax 😂

  • @nigelswann2873

    @nigelswann2873

    Жыл бұрын

    Is this one better than your old daily?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    @@nigelswann2873 Well its 3yrs newer than the black one, has AC, is free tax (black one is £30 a year) and now has a lot more new parts than the black one....

  • @zomfgwtfbbq1
    @zomfgwtfbbq15 ай бұрын

    Thanks for sharing, nice job mate

  • @DrizzDevelopments

    @DrizzDevelopments

    5 ай бұрын

    Cheers :)

  • @tibor_turi
    @tibor_turi Жыл бұрын

    Nice !!!

  • @bertlzansinger
    @bertlzansinger10 ай бұрын

    Thanks a lot for the insights! Although I definitely don’t have a clue, how someone who is capable of dismantling the whole car does not check penny goods like a dust cover prior MOT.. 😂

  • @DrizzDevelopments

    @DrizzDevelopments

    10 ай бұрын

    Have you priced one up? ;)

  • @richardmawdsley2589
    @richardmawdsley25897 ай бұрын

    Many thanks , very helpful. I have to remove clutch on an 03 but mostly the same procedure? Knocking noise on tick over sounds like pressure plate has come loose. Thanks again

  • @DrizzDevelopments

    @DrizzDevelopments

    7 ай бұрын

    No problem at all

  • @ferrumignis

    @ferrumignis

    Ай бұрын

    On a 450 the "spider" frame that attaches the flywheel to the crank can break which causes a bad rattling.

  • @valentincordero7802
    @valentincordero7802 Жыл бұрын

    Saludos desde México colega!!

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Hello to Mexico!

  • @pietermaritz9127
    @pietermaritz912714 күн бұрын

    Thx for a good video..very helpfull...my smart roadster refuse to start.. fresh battery and immobilizer deactivated.. turn key still nothing... any idea where to start looking

  • @DrizzDevelopments

    @DrizzDevelopments

    14 күн бұрын

    Check to see if you have brakelights. Faulty brake light switch is a known cause

  • @randyrobison335
    @randyrobison335 Жыл бұрын

    Thanks for sharing. That's a lot of work for nothing. Now we are experienced.

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Nothing? Why nothing?

  • @randyrobison335

    @randyrobison335

    Жыл бұрын

    Clutch replacement. I would definitely test actuator first. After watching your video ofcourse. I was just doing research on the Smart car. I'm thankful to have KZread and all you content creators.

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    @@randyrobison335 Ok. Im. bit confused? Mine was the clutch itself? Or are you saying before going for a clutch change on yours, you would check the actuator first?

  • @ewanstewart8011
    @ewanstewart8011 Жыл бұрын

    I’m never against reusing any serviceable parts because as you say it’s all about recycling 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    In this day and age it certainly is!

  • @ferrumignis

    @ferrumignis

    Ай бұрын

    I draw the line at used brake pads, they are so cheap new and it takes forever for used pads to bed in to different (used) discs.

  • @misterspok7742
    @misterspok7742 Жыл бұрын

    У меня родстер и тоже ремонтирую сам. Ты крут чувак. Единицы могут делать такие машины.

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Thabnk you for the compliment :)

  • @michaelnassaralame7170
    @michaelnassaralame7170 Жыл бұрын

    Got these codes P0900 - P0805 , already ordered a used gearbox hopefully that will solve the problem 🤞

  • @kayali8842

    @kayali8842

    Ай бұрын

    Did it fix the problem?

  • @viralbull8085
    @viralbull80853 ай бұрын

    my clutch is bald, i can feel it slipping so bad, i need to do this to my little bug asap, how long do you think this job takes, can you do a timing chain while the engine is on the car, whats your thought on ebay parts, mine just crossed the 190,000 miles on the road i am hopping to keep it alive much longer, i love this thing so much i don't know what i would do with out it 🥲

  • @DrizzDevelopments

    @DrizzDevelopments

    2 ай бұрын

    Takes a morning. No idea on the timing. Not done one yet im afraid. Id go with the OE Sachs clutch every time. Was very reasonably priced.

  • @safayt28
    @safayt282 ай бұрын

    Why is oil above the transmission? (the black oil ) Where does is it come from?

  • @richardmawdsley2589
    @richardmawdsley25897 ай бұрын

    Great video , thank you. Please could you tell me the socket o need for the axle bolts? I only have up to E24 and this is too small. Are they torx or something else? Many thanks

  • @richardmawdsley2589

    @richardmawdsley2589

    7 ай бұрын

    Drive shaft bolts . I mean .thanks

  • @richardmawdsley2589

    @richardmawdsley2589

    7 ай бұрын

    I've discovered they aren't Torx but 21mm multi point socket. Thanks

  • @DrizzDevelopments

    @DrizzDevelopments

    7 ай бұрын

    @@richardmawdsley2589 Glad youre sorted :)

  • @deeknorville4198
    @deeknorville41985 ай бұрын

    Did you used to have a Astra 200ts?

  • @DrizzDevelopments

    @DrizzDevelopments

    5 ай бұрын

    I did indeed yes

  • @kennylovernjr3468
    @kennylovernjr3468 Жыл бұрын

    I just bought a 2013 Smart Passion Cabriolet. It has the automatic transmission with the paddle shifter on the steering wheel. My trans is making a rattle noise. Does mine have a clutch also?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    If its a 451 (this shape) then definitely it will have a clutch. If its the next shape along then i dont know as not had one in yet

  • @Stanwis

    @Stanwis

    11 ай бұрын

    for 451 80k-120k on clutch is unfortunately max it will do. 60k if you dont bother to adapt gearbox at least every 15k.

  • @kayali8842
    @kayali8842Ай бұрын

    Someone help me, the car starts fine with no dashboard lights, it goes into R and N and gear 1 but the car won’t move when peddle is pressed? It’s as if it’s still in neutral and just revs

  • @DrizzDevelopments

    @DrizzDevelopments

    Ай бұрын

    Youll probably need to do this job then to see

  • @mikedavies4387
    @mikedavies4387 Жыл бұрын

    Another good video it looked a pig off a job

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Thanks Mike :) It was all fairly easy to be fair

  • @mikedavies4387

    @mikedavies4387

    Жыл бұрын

    @@DrizzDevelopments your welcome pal

  • @FlashBack82

    @FlashBack82

    Жыл бұрын

    Great video. How much time to take gearbox down in real time? Aprox 45 min?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    @@FlashBack82 It was my first time and I used hand tools so took a little longer

  • @charlesjourdan1003
    @charlesjourdan1003 Жыл бұрын

    Hallo, i want ask i have smart Fortwo same like the video, my car cannot start , i want ask where is the starting motor located?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    First things first, do your brake lights work? If they don’t illuminate when you have the ignition on and press the pedal, change the brake pedal switch first. If they work then it depends on the model you have. If MHD then the starter is built into the alternator and you need to drop the subframe to lower the engine enough to be able to change it but they’re not cheap. If it’s non MHD then it’s bolted to the gearbox like any other car

  • @deeknorville4198
    @deeknorville41985 ай бұрын

    I thought it was you! I’m spankees old mate with the vectra turbo, mate, didn’t I buy my Astra van that I put a Saab engine in off you?

  • @DrizzDevelopments

    @DrizzDevelopments

    5 ай бұрын

    Yes mate Christ that’s a blast from the past! Hope alls well in your world lol

  • @gplusgplus2286
    @gplusgplus2286 Жыл бұрын

    Used my 451 to tow my brother's stuck Berlingo van, I know I know. Seriously overheated and smoked the smart clutch and now after two weeks the burnt smell is still there. Any ideas?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Probably full of worn clutch material from the tow and as it warms up it smells

  • @gplusgplus2286

    @gplusgplus2286

    Жыл бұрын

    @@DrizzDevelopments thanks a lot mate, that seems quite plausible.

  • @welshd1k
    @welshd1k4 ай бұрын

    This a diesel one?

  • @DrizzDevelopments

    @DrizzDevelopments

    4 ай бұрын

    Nope, MHD Petrol

  • @anibee3433
    @anibee34336 ай бұрын

    @drizz how do we get hold of you

  • @DrizzDevelopments

    @DrizzDevelopments

    6 ай бұрын

    You just have. How can I help?

  • @anibee3433

    @anibee3433

    6 ай бұрын

    @DrizzDevelopments i have a smart needs a clutch replacement are you able to do it for me

  • @DrizzDevelopments

    @DrizzDevelopments

    6 ай бұрын

    @@anibee3433 Where are you based?

  • @ashstonk
    @ashstonk Жыл бұрын

    where are based bro been looking for a good smart mechanic

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    Suffolk UK

  • @ashstonk

    @ashstonk

    Жыл бұрын

    @@DrizzDevelopments why are all the good smart mechanic out of London 😩 do u have web for contact

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    @@ashstonk drizzdkp@gmail.com

  • @ashstonk

    @ashstonk

    Жыл бұрын

    @@DrizzDevelopments awesome thx ☺️

  • @geidsonqueiroz2680
    @geidsonqueiroz2680 Жыл бұрын

    hello friend I have this dtc below on a smart can you help 1

  • @geidsonqueiroz2680

    @geidsonqueiroz2680

    Жыл бұрын

    Dtc p1700 Dtc p0886 dtc p0885 Dtc p1800

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    See here: www.evilution.co.uk/mod/obdii-error-codes.htm

  • @Danifender93
    @Danifender93 Жыл бұрын

    How long does it take to change a clutch? My mechanic wants to charge me $1200 US dollars, does it sound fair?

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    If youve done it before probably 3hrs all in. Id allow a day for a novice

  • @Danifender93

    @Danifender93

    Жыл бұрын

    @@DrizzDevelopments thanks for the quick response. So, $1200 sounds a bit too much for 3 hours... They are not novices...

  • @DrizzDevelopments

    @DrizzDevelopments

    Жыл бұрын

    @@Danifender93 Id say so to be honest

  • @Stanwis

    @Stanwis

    11 ай бұрын

    @@DrizzDevelopments i think a lot of smart mechanics just say outreagus amounts for any work on smart - cause its a smart car and everything is hard on it ;) I understand air condenser is a lot of work (not hard maybe but time consuming) while clutch change looks really quite easy even for novice. Also it seems a lot of things is easier to do than on olderr models (450 i mean).

  • @DrizzDevelopments

    @DrizzDevelopments

    11 ай бұрын

    @@Stanwis Thanks for watching :)

Келесі