Remove door lock without visible screws and stuck latch spindle
Тәжірибелік нұсқаулар және стиль
This is how to remove a door knob / lock / handle with no visible screws and a stuck latch spindle. You will need to know this in order to remove this door lock. The first is to gain access to the screws which are hidden under the cover plates of the door handle. The second is to remove the latch spindle by removing the o ring which is preventing the spindle shaft from being removed. This will drive people crazy if they dont know....
For more DIY and how to videos LIKE COMMENT and SUBSCRIBE.
Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_...
#DIY #howto #billshowto
Пікірлер: 170
Thank you so much. This is the exact lock we have and could NOT figure out how to get the bl00dy thing off
I was going crazy trying to work out how to remove the spindle - thank you for having the exact video I needed.
@billshowto
2 жыл бұрын
You’re very welcome 👍
We were going crazy trying to work out what to do with a similar door lock we have. Watched endless videos without any luck and then we found this one. THANK YOU!
@billshowto
Жыл бұрын
👍👍👍
I’m so glad I found this video. I tore one of these a part to get it off but had 6 to go - thought there had to be an easier way. You’re a legend!
Absolute Legend! been struggling with this for over 3 months
@billshowto
3 ай бұрын
You’re welcome 👍
❤ I should’ve checked this video before I spent one hour to fiddle around with the spindle. Thank you so much 😊
Thank you for showing how to remove the spindle - brilliant!
Holy crap you saved me! I was wondering what was wrong with my latch compared to all the other tutorials!
Oh my god. Thank you so much!!!! This absolutely drove me nuts when I tried to remove the spindle. That darn o ring!!!!!Happy to say that as soon as I saw your video, I was able to replace the door handle that’s been out of action for months. Cheers
@billshowto
2 жыл бұрын
You’re welcome 👍
The issue is the spindles has gone in and the door is shut. Door won’t open now and has no handle, just the spindles stuck in it
@jodiepinnington1726
9 ай бұрын
The same has happened to mine. It closed so I can’t get to the other side to loosen the second screw. How did you manage to fix it?
@bhagyashreenolkha6546
5 ай бұрын
How did you fix it? I have same issue my door is locked
@ValBarber-by1sd
3 ай бұрын
Me too same issue
Great video. Thanks for doing this. I have 5 of these locks, 3 stopped working after 3 months of use. I need to do a DIY and replace.
Thanks Bill!Mate, I've come across a few of these over the years every now and then & they've had me stumped how to get out to make the painting easier.Now I know so, thank you! Loving the vids and tips, keep them coming champ!
@billshowto
2 жыл бұрын
Painting the door will now be a breeze with locks finally off 👍👍👍
Thanks this saved me a massive amount of time!
Another Aussie posting an unbelievable video that I didn't think would exist. Great stuff! You gotta laugh at how many people would have been really pissed getting that bit off. I did a quick search and bang. Onya mate
Had the same problem guys..frustrating🫤🤣 Thanks for the great video mate 👍
Legend! Thanks so much, I just cut it off took 2 seconds. Mine was a Gainsborough brand handle if anyones trying to figure it out like me.
Thanks Bill, It was driving me crazy
Brilliant mate thanks. You almost need to be a surgeon for this one. Cheers.
Thanks mate, I was going crazy trying to get that spindle out, you saved me from tearing the door down in frustration 😅
You're doing an awesome job dude.
Bill you’re a legend - thanks!
I’m stuck at removing the cover 😫It’s not as easy as just turning left. Haven’t gotten to the ring part yet. It’s exactly the same brand I have here. Thanks for the vid
Thanks for helping me fix my door, cheers Bill
Wonderful, you saved our sanity! Thank you 🙂
Great tips - I was stuck with it your advice on o ring did the trick - thanks
Brilliant Bill! I couldn’t quite work out how to get that plate off. Now it is a piece of cake to tighten the screws again. Thanks for all your great videos. You’re a legend! Cheers Kev
@billshowto
2 жыл бұрын
You’re very welcome 👍👍👍
Thank you. Was stuck with the o ring for two hours before i came across your video.
@billshowto
2 жыл бұрын
You’re welcome 👍
Just about to replace a latch today so this is top info
Years of confusion solved in 5 minutes. Well done, sir.
@tabithaalice9369
Жыл бұрын
Not just years of confusion, during which time the top screw pulled further out from the door, but a considerable amount of time wasted, all fixed now, deceptively simple, thank you 🙏🏽
Gainsborough Locks, yuk! Good Channel...
You are a life saver
Bill to the rescue once again... 👏
Thanks buddy it’s just what I needed to know
Great video, Bill. Thanks 👍
Saved me a huge headache. Cheers
Great video Bill. Cheers mate.
@billshowto
2 жыл бұрын
You’re welcome 👍
Thanks for the help! Unfortunately, the spindle still wouldn't come loose after removing the washer. I had to use some locking pliers to yank it out. Hopefully this helps someone else.
Thanks 🙏🙏 mate it's help me I was stuck same step and waste one hour to remove whole lock unit and your video save me and I am so glad that I have fix new lock ,thanks again for your video
@billshowto
Жыл бұрын
You’re welcome 👍
Thanks champ, that damn o-ring had me!
Great simple video which will save me heaps of time. 😊🙏👌
Thank you so much , i try a lot of time !! Now i understand !!
Wonderful video, saved the day for me, thanks!
After this video helped me realise there were covers in the way, I then found out that the allen key screw that was holding the cover on was stripped and preventing me from getting one cover off, but I did manage to fix several loose handles now though. Thanks heaps.
Thanks, just what I needed to know
Thanks brother, something as simple and small as that lead me to your video 😂
Really helpful! Really stupid O RING! Thank you!!!!
You are a champion mate… Double thumbs up 👍👍 from me…😊
Great video 👍👍👍
Mate, that effin spindle drove me doo lally. Thanks for helping me regain the will to live. I'm now a sub, good on ya.
@billshowto
5 ай бұрын
You’re welcome 👍
One word...... LEGEND
Keep up the good work mush!
@billshowto
2 жыл бұрын
👍
thanks mate, just what I needed
@billshowto
2 жыл бұрын
👍
Thanks! Saved me!
Your channel is such a nice change from all those commercial "faux DIY" channels with guys in branded polo shirts trying to sell you some whacky product.
@billshowto
Жыл бұрын
Lol 👍
Very good explain. Thanks
Thank you Bill
Thank you, very helpful
Thank you! I would never have figured this out.
Omy God I was getting to the crazy part lol. Thank you thank you
Extremely useful
Thank you!!! I couldn't work out how to remove the spindle either.
Thank-you! Sanity intact
Thanks nice tip
you have saved me couple of hundred dollars. thank you very much.
@billshowto
Жыл бұрын
You’re welcome 👍
You saved my sanity!
Thanks a lot mate..
Thank you
Nice.. best vid.. thanks dude
You the MAN !!!!!
thanks Bill.....solved thanks to you
@billshowto
Жыл бұрын
👍
Thank you so much
THANK YOU
Thank you so much, got up to being able to remove the spindle, who would have thought that stupid rubber seal was the answer!
@billshowto
Жыл бұрын
You’re welcome 👍
Thanks sir
Ive just come across your channel. You explain things very well so I have great confidence that youll be able to help me with this problem. Ive been in the construction game for a while now. Im not at all a lock smith, but Ive had to wrestle with a few locks in my time. Ive recently come across an entrance lock that does not move. The door was closed and we couldnt open it. Ive taken the whole thing apart, both sides, up to exposing the latch. It has a type of metal sheet surrounding it. So, basically, you can see the latch going through and this vertical sheet is totally surrounding it and takes up the whole...um...hole, so the latch cant be wriggled free. Im hoping theres a way of taking it out without damaging the door. Have you come across this type of locking mechanism often?
@billshowto
2 жыл бұрын
If you send me a photo I may be able to help. If you just need to open the door and latch is faulty I have a video on using door shims to open the door. Hope this helps👍
Thanks bro
Coooooool thank you
Thanks heap’s
Thanks - worked a treat. I understand its purpose is to keep the spindle central, but Wouldn’t it be fine without the o-ring there? I can’t imagine the spindle slipping out of one of the handles.
Nice!
@billshowto
2 жыл бұрын
👍
Thankyou, i was about to rip the door off it hinges but you saved me. What is with the rubber washer, dumb. Love hearing a aussie voice on a KZread help channel .
Awesome! I had the door handles loose and rattling which this video helped me a lot. But why would I need to remove the spindle - to solve what problem? I just left it there and tightened the screws and the rattling is gone!
Great video! I was about to break out a saw
Thanks for your video. Could you pls share the video where the spindle has a hole on one end. And use of allen key to remove
Legend
Hi Bill, thanks for the videos! Ive got the same gainsborough locks in our internal doors. The kids have been playing around with the locks and the push button screw has fallen out. Screwing it back in doesnt seem to lock the door - any ideas??
Oh my god thank you.
You are no1.. Cheers mate
@billshowto
2 жыл бұрын
👍
Thanks bill but mine is a Gainsborough almost the same as the one you show BUT mine has no ‘O’ ring or circling or screw. I still can’t get B xxxxxx d out. Any tips ??? TIA
Thanks so much 😅 you just saved a marriage!!
legend
Nice one Bill, thanks for the great video.
@billshowto
2 жыл бұрын
👍
What's the bore whole of this lock I seem to have a Gainsborough with a bore hole that's small than 50mm
Thankyou very much bill amazing and straightforward video quick question i broke one of the rubber seals trying to take it off does it have to go back in when i put the handle back on cheers.
@billshowto
9 ай бұрын
Hi, no I dosnt have to go back on 👍
@yusufg2188
9 ай бұрын
@@billshowto Thankyou so much again bill God bless
Thanks for this, finally managed to get mine off. The innards of mine were much simpler than this (no o-ring, thank god) but the outside cover was really tight and felt like it'd been glued in place. It also opened only from the outside when most articles talk about taking it off from the inside first, go figure.
The other models just has a tiny button at the top of the spindle that you push down and slide through and the spindle comes out
Cheers that did my head in until I saw this.
Awesome video but my issue is that im locked out so i can only access the outside of the door handle. Not sure how to get it open from here but if anyone has any tips please feel free to share.
Mate thank youso much, that rubber oring, was a prick, thank you so much...legend
@billshowto
Жыл бұрын
Lol, I still curse it till now 👍
@The-Wise-One
Жыл бұрын
@@billshowto I was cursing, close to snapping it.. thanks again
Mate thank you for the clue about the o-ring. What a stupid idea that is. Those guys must have stayed up all night thinking of a way to screw with us 😂
@billshowto
Жыл бұрын
Lol, they did a good job👍