Awesome, fantastic! This DIY RC lawn mower is one of the best, even if not the best, I have seen. It effortlessly cuts tall grass, due to the 4-wheel-drive design, it manoeuvres well in difficult terrains such as slops, it weighs ideally for stability in mowing grass and moving in various directions while not over burdening the motor . Well done! I would humbly suggest you to refine, package and commercialize this fantastic mower. Thanks

@marmasteris

Ай бұрын

Thanks you for the high rating.

전문가의 솜씨네요. 훌륭합니다.

Been looking at several of these mower builds and there arte things you've done here I like a lot, the tires will not chew up the lawn, the motor setup is not high dollar wheelchair/scooter parts, and it is wide. I would like to get a copy of the CAD files and anything else that applies. Good job and many thanks for sharing. DC

@marmasteris

7 сағат бұрын

CAD files request link in description under video

Very good work, I want to build one too

AWESOMEE!!! PLEASE WIRING CONNECTIONS I NEEDED YOURE GOOODD

Very cool looking build 👍

@lehbarbosa6326

2 ай бұрын

Gostei muito do projeto Mas porque trocou as rodas?

Best design/workmanship I've seen so far for a rotary mower. The cat likes it too. Additional footage of the build would be good to see. What horsepower motor did you use?

@marmasteris

6 ай бұрын

Motor 15.6-18.5HP.The cat is a technical expert😀

Super projet ! est-ce qu'elle broie les herbes très haute? (Mulching) Si je pouvais avec les plans, merci.

I like how your motors are centered rather than near the ends of the mower

Well done 👏

Muito bom mesmo.. Parabéns guerreiro

Your very talented

@marmasteris

5 ай бұрын

Thanks, but I didn't know about that😁

On dirait un petit char ❤

is there a reason you got rid of the meaty tires? if its because of the skid steer the geometry might just be bad if you are too long and not wide enough it will result in alot of slipping around but i liked the knarley tires.

@marmasteris

3 ай бұрын

The meaty tires tear up the lawn when turning, that's why I changed them.

I've done a few, so great to see someone else's vision. I see you're using an alternator off the shaft - when I did that with a 24v alt, I found it got extremely hot as it's constantly working at max capacity, and eventually its shaft would swell and bind against the bearings. Do you have any similar problems?

@marmasteris

12 күн бұрын

No, there is no problem with the alternator.Alternator 24V,120A, max.consumption 70A at zero turn,so the alternator is not fully loaded.

@digdilem

8 күн бұрын

@@marmasteris Interesting - that might be my issue - my alt is only 52a and I've got four wheelchair motors. The 5.5hp engine isn't quite powerful enough to run the alt and cut thick grass either, so I've just removed it and put a couple more batteries there for now, lasts an hour of heavy use which is a full tank of petrol too.

Awesome content, doyou have the specs available & also the Cad drawings. What motors are you using for the 4x4 and also the 3 motors for the grass cutting blades. What is thesize and weight of your machine? Thanks for any help you can provide.

@marmasteris

21 күн бұрын

4x4 motors DC 350W,24V.Lawnmower weight about 230kg.Grass cutting motor 18.5HP (max.power) internal-combustion engine.

@Tinkerbell227

21 күн бұрын

I would like to get the cad plans or hire you to make me 2 of them. One as a mower. And the other with just a flat deck on top to move stuff around like car motors. A machine simular to the one at minute marker 9:42. But I want turf saver tires on the mower instead of wheel barrel tires and those bar tread tires on the mover.

@marmasteris

21 күн бұрын

@@Tinkerbell227 CAD files access link in description under video.

Great project. What electric motors do you use?

@marmasteris

26 күн бұрын

DC 350W,24V

geniale!

Какой мощности двигатель? И какая ширина покоса ?

@marmasteris

7 ай бұрын

11.5kW, 1m

Hello , Thank you for nice build , do you have any plans or material list ? How you build this wheels ? Thank you for Your answer M

@marmasteris

Ай бұрын

There are plans, but not complete. I redid some parts during the production process. For example, I made the frame without any plans.Motors MY1016Z3 350W 24V

@martinchyska1669

Ай бұрын

⁠@@marmasterisHello 😊, thank you for info about motors, but how you build this wheels , rims etc. I see you use supersprox with some adapter ? Hub ? This will help me thank you .

@marmasteris

Ай бұрын

@@martinchyska1669 I bought wheels, sprockets and made adapters based on them.There is a lot of turning work here. You can't do without a lathe.Most of the parts are laser cut from 5mm and 6mm steel.

@martinchyska1669

Ай бұрын

@@marmasterisohh that’s the little problem for me I have non of this devices :( but thank you very much for answering. I would really like to build this stuff but looks like I would need some help 😊. If you can send me some more details I will be very glad. Thank you !!!

@marmasteris

Ай бұрын

@@martinchyska1669 Look here drive.google.com/file/d/1T8xJqI7PX_VHzxyEESHVz_uwYL2rs1CU/view?usp=sharing Download for better quality. Based on this, you can create something of your own and according to your capabilities.

Ingenieur!!!

How did you control all 4 motors?

@marmasteris

25 күн бұрын

Radiomaster TX16S transmitter,but it can be anything RC transmitter.

@Kull1645

25 күн бұрын

@@marmasteris I mean what motor driver board?

@marmasteris

24 күн бұрын

@@Kull1645 120A Dual Way Brushed Motor ESC 12-35V 4pcs.

Can i have the CAD Files for this i would love to make this its the best ive seen.

@marmasteris

Ай бұрын

go drive.google.com/file/d/1HXx46yHvjCuAM97IAjEQ7mZGNRl4tNNV/view?usp=drive_link I'll see a request to share.

@AestheticRedditStories

Ай бұрын

Thanks ​@@marmasteris

Quelle cylindrée le moteur ?

@marmasteris

Ай бұрын

547 cc

Why aren't all lawnmowers like this?

@marmasteris

2 ай бұрын

Maybe the manufacturers will see and start producing such mowers 😊

Sa peine pas dans la broussaille !

❤🇹🇭🇹🇭🇹🇭🇹🇭❤🎉

Цікавий варіант