This is one of the coolest DIY vids I’ve ever seen. Mate you’re brilliant! Just the device I’ve needed for my P4Pro. Cheers from Australia 🇦🇺🤘🏼

Like my Facebook page for more awesome stuff: facebook.com/rclifeon/?fref=ts

That's really cool!! It looks really professional!

Thanks Mate I got 1 printed up works great

This channel is very nostalgic for me😖😖love itt.. This old videos make me timetravel to old days😭love from India brother😍😍😍

@aidenkahn4338

Ай бұрын

It's only 2016 😂

Nice work Thank you very much I am a follower of a channel greeting you from Algeria

That was awesome.

PERFECT !!!! thanks man it will work ^^

Perfect bro! keep it up !

@RcLifeOn

7 жыл бұрын

Awesome, thanks for watching!

I watch your videos when iam 9years old now iam 17😊

Is it possible to get a digital servo setup to fit in this model? Besides I wanted to get long range of transmitting the signal to servo from the ground (approx. 10-20 miles)

I love your all video.

I have Bayantoys X16, if i buy a servo and a receiver, how do I make use of unused button on the Tx to make the servo work? Any tutorials on that?

Dude! I am your biggest fan ....!!"

Good old days🙂

0:05 music give me chill😭😭old days miss u

That was cool!!! Mind to share you circuit diagram?? Please

Instead of using a transmitter can you just use a photo resister as the switch and hook it up the led lights which can then be turned on and off in the app so it opens and closes the mechanism

100% golden 💪

This is perfect for what I have in mind for drone fishing. Thank you for working on this

@RcLifeOn

7 жыл бұрын

+Young Chung Awesome, will you make a video? Thanks for watching!

@njoy012

7 жыл бұрын

I'll give it a try!

@user-in8bz3kd7d

Жыл бұрын

@@RcLifeOn Finally found the right person who has the same hobby as me. The drone is modified to deliver the device. My learning goal of not being able to sleep at night

Cool video ,,where did you get the plans for the 3D version ,,,thanks Capt Jay from buffalo ny

Very good, someone has or knows where to get the stl of the impure piece, because what I see does not answer.

I hope ur channel will grow even bigger

@RcLifeOn

7 жыл бұрын

I'll do my best, thanks! :)

@JVAGunner

7 жыл бұрын

No prob man

I am new to this, how do you connect the transmitter to two recievers i.e. one on the quadcopter and another for the drop mechanism?

@JMD09

7 жыл бұрын

you don't have to..if you have a spare channel on your receiver then you can make this work on the same system. Believe he was showing this as a complete separate system to test it out independently.

@RcLifeOn

7 жыл бұрын

Let me know if you need any more help, and thanks to JettaManDan for making it clear!

@JMD09

7 жыл бұрын

you are welcome! happy to help...great design...i may use it myself...like the idea of the 2 blocks so the rod doesn't fall out...can see that sticking down on a landing and causing issues ;-)

@imemyself2820

6 жыл бұрын

richie Archie: Maybe just hook up with some forums, youtube is not a helpdesk

thank you

Great video! ^_^

@RcLifeOn

7 жыл бұрын

Thanks man!

My question is how are you transmitting the connection from the transmitter to the drop server, without breaking or tapping into the remote? Do you have to have a separate remote to connect to the server? What did you do to make connectivity to drop a device. I want to do this with a DJI Mavic or Mini series. What is the furthest connection you can get in the air? Do you sell and custom make these. If so, I would like to purchase one!

Hello, I would like to make this scheme to use in mavic pro, but in this case I would not need to use the receiver, I would like to adapt the light sensor to put in front of the led that has on the mavic arm, could you help me do this change

Is it possible to make this device with a different drone?

Awesome

Donde puedo comprar uno hecho ya?

some guys get all the nice toys

Hey, the link for the transmitter is not available anymore. I would like to build something like you posted and I am stuck due to the transmitter. Can you please share a good link for a transmitter & controller which will work with the setup you listed here? Thanks a lot man!

Some fun stuff to drop are pop it's

if we want through two ball and using ine servo how we can do it

awsome

How do i charge the battery?

Did you upload the plans for the 3d model?

@GuthrieDennis

5 жыл бұрын

www.thingiverse.com/thing:920725

how long is the range

Muy buenas, alguien tiene o sabe donde conseguir el stl de la pieza impreasa, por que el por lo que veo no contesta.

Hey I saw that that ESC is really a voltage regulator or so I think. If you know where I can find that or what amount of voltage it regulates that would be very useful.

@harshvardhanrastogi2273

3 жыл бұрын

12v to 5 to rx

@dnoobz76

3 жыл бұрын

@@harshvardhanrastogi2273 unfortunately I no longer need the answer to my question as I asked it 2 years ago, but it’s the thought that counts. I guess.

great video , please can you share the 3d print ?

@GuthrieDennis

5 жыл бұрын

ENM Adam www.thingiverse.com/thing:920725

@cgr3955

Жыл бұрын

@@GuthrieDennis thank you man!

hola amigo necesito un dispositivo de estos. que cuesta con envio a colombia? gracias

Hi,u can teach in a video how to config. a servo in a remote control(step bye step)?

@_AlienPhotography_

Жыл бұрын

Does Bro even respond?

How did you control the servo? using ppm or pwm?

@RcLifeOn

7 жыл бұрын

I used a 2.4GHz receiver and transmitter (PPM).

could u share the 3d model file for the 3d printed version?

yeah i like your video....... please keep senting

@RcLifeOn

7 жыл бұрын

I will, thanks bro!

What size of end tube did you use? that's a beautifully simple design btw, well done!

@RcLifeOn

7 жыл бұрын

The size of the hole is slightly larger than the steel rod attached to the servo.

@Pownyan

7 жыл бұрын

oh, i meant the tube connected to the gas container

@RcLifeOn

7 жыл бұрын

Alright, I believe it was a 3mm (inner).

@Pownyan

7 жыл бұрын

Thanks :)

@user-in8bz3kd7d

Жыл бұрын

@@RcLifeOn Brother, what is the name of your motor, and what is the name of your motherboard on the Internet? Can you share it with me?

You can to do a shooter for xiaomi yi.

Can you use your existing receiver if you have an open channel?

@RcLifeOn

7 жыл бұрын

Yes of course!

wow

My best option is to use a motor drop release mechanism from an RC car, on a separate transmitter from the rc remote

Were can I find the STL file for the bomb dropper?

Does anyone have the link to the file for the 3D printed version?

@aidanwansbrough7495

5 жыл бұрын

Ava D Someone in the comments posted this link for the 3D printed version of the drop mechanism: www.thingiverse.com/thing:920725 I know I'm replying almost a year after you asked, but I hope this helps :)

@takorngameing4343

Жыл бұрын

OMG TYSM

Do you sell the 3D printed ones?

@ericstephany7305

3 жыл бұрын

No, I don’t sell them

Hey! Would it be possible to get a different voltage servo, so you could use existing power. My drone has a 5v and 12v output. if I get a 5v servo I should be able to eliminate the extra battery right?

@RcLifeOn

7 жыл бұрын

Hi! Did you build the drone? In that case you can just plug it into a free channel of your receiver and assign a switch on your transmitter to activate it. Often servos accepts a voltage of 4-7V.

@Agustin-jo8mv

7 жыл бұрын

RCLifeOn No, I didn't build my drone. I really wanted to buy it seemed like a better deal to buy a plug and play one. I've got my payload release set up now! Thank you for the help. :)

@Agustin-jo8mv

7 жыл бұрын

RCLifeOn I just used hot glue to mount it to my servo. All I am adding to the drone is two 1/2 inch piece of brake cleaner straw, some hot glue and a servo. I used a paper clip to connect to the servo and just bent it to the correct shape to release the load.

where can I get the 2mm diameter steel rod?

@RcLifeOn

7 жыл бұрын

Local hardware store or online. You can also salvage steel rods from things like umbrellas.

Have cad drawing anywhere?

hi do you have file of the 3d? ty

Wow... I like that beat can you tell me the beat title?

@RcLifeOn

7 жыл бұрын

Check the description for music.

@WideEyesChannel

7 жыл бұрын

Thanks

what about the 3d printed part

@themovieman5761

4 жыл бұрын

Who knows!!

Can you upload the .stl file (or whichever type you use) of the 3D printed version somewhere?

@MegaMellojello

6 жыл бұрын

ya that would be super amazing!

@GuthrieDennis

5 жыл бұрын

www.thingiverse.com/thing:920725

where can i get the 3D printing design?

@RcLifeOn

7 жыл бұрын

Here you got mate: www.thingiverse.com/thing:920725

so cool

Can you give me a reply for me🥺big fan from childhood

how many gramm servo?

@RcLifeOn

7 жыл бұрын

It's a 9 gram servo.

Good Video but any chance of the 3d print design .

pls reply om from Indonesia

@RcLifeOn

7 жыл бұрын

Here's your reply.

@themovieman5761

4 жыл бұрын

Not funny

I hope you respond in a timely manner or if at all.

You coud have dropped the esc and then the big battery

Release the stl

This is great! now build an aerodynamic pod for it and mount 6 of them on to a fixed wing drone bro! I bet you can't engineer that lol

rc life on plz reply plzzzzzzzzzzzzzzzzzzz

@RcLifeOn

7 жыл бұрын

Hi bro :)

@isaacld14

7 жыл бұрын

RCLifeOn hola queria decirte que aprecio tu trabajo y lo admiro!!! pero estaria bueno si podrias subtitular tus videos al español para entender mejor y seguir paso a paso correctamente... solo es una opinion de alguien q le gusta tus proyectos estaria muy agradecido si lo harias. un gran saludo

@Magma_Boy

6 жыл бұрын

Burhanuddin Shabbir Shabbir tredreing

I'm pretty sure you didn't control this drone with this controller

Iam omayer dude where you find servo

@RcLifeOn

7 жыл бұрын

Hello, you can find the servo here: www.ebay.com/itm/1PCS-9G-SG90-Mini-Micro-Servo-For-RC-Robot-Helicopter-Airplane-Car-Boat-C9-/262494744056?hash=item3d1de7edf8:g:wg4AAOSwGIRXa3jv Thanks for watching and good luck!

I want to put something in the comment but i got nothing. Put a servo on a motor bike

Bro got 99999 assists

Great idea, but am I the only one that cringed every time he drilled something while holding it in hand?

POV:your watching this in 2020

by the way I love you DJI PHANTOM im collecting money to buy on.....PS: i only get $5 a month so it is going to be hard😯

That looks like lazarbeam

Safety glasses....if you don't mind crafting a white cane for yourself, kids are watching you

Thumbs down for music and NOT TALKING@#!#@! FOR ($*% SAKES@!!@@

An instructional video with out instructions is useless waste of time.