Good shooting gun. 243 is my favorite round. I load the Speer 75 grain varmint hollow point. If you try it you will love it. Thanks for sharing your time and videos with us.

That 243 us an absolute shooter. I’d be happy to cash out with any of those loads. Cheers from Down Under.

Always loved speedy twist .243s Especially with the heavies and a rifle/mag box combo that allows you to stretch the COAL.

Nice shooting! Great cartridge. My rifle really likes the 87 grain Vmax over IMR-4064.

Hey CD i just shot a very similar load yesterday... 243 rem 700 26 in bbl... my best group was with 38.5 grains of Varget with 75 gr vmax... 4 shot group just under 1/2 inch at 100 yds... 2.260 cart base to ogive... great video !!!!

That's a sweet setup brother... The 243 is something I've always wanted to tinker with but never have. Great video as always and can't wait to see the prairie dogs flying!!! LOL

That set up seems like a great heavy varmint coyote rifle, but downright excessive for prairie doggin.

@cavedweller1959

2 жыл бұрын

No such thing.

I like CD because he actually shoots something. I take his word on rests, etc.

Mornin CD!!! NICE!! I am buildin' a 6mm Rem hoping for delivery in April. Im targeting 105g but have a bunch of 75, 85g too. Had a couple 243's. Just always wanted a 6mm Rem. A 24" 1:8 3R .750 bbl gettin spun on.

Excellent shooting! Gotta love the Remington 700!! Gotta long range in 30/06 and a ton of reloads made up. Of coarse I haven't been out yet, kids, wife and snow!! Uugg

Always enjoy your shooting Thanks !

now that's a good shooting rifle. I would have 100% confidence in shooting that while hunting.

Stepping up your game. Looking good..

I always shot 70 gr Btips until I tried the 87 vmax's. I like the little longer range. I have some 75 's too. My most accurate is the 90 gr Bergers hpbt. Can't get them any more. The 88's are pretty good. I have 60 left of the 90's and only use them on 400 yd plus shots. They shot an inch at 400 yards on a calm evening. That is out of a custom stocked all factory Savage action, trigger and a hand lapped factory savage barrel. Thanks for the video. Getting me the fever waiting for the beans to come up next month.

I like how the 87 and 65g Vmaxes are hitting the same spot on the target, no need to adjust the scope!!

Great shootin and a badass rifle sir…… Id take that all day long!

How long of barrel is that?

Hey CD good shooting, a little advice, i have sen groups like this before and they only needed a move off 2 thou and they tighten right up, just seating depth and it be one hole, keep up the good vids

I found a 280 700 from 1979 dont no anything about it its thumbhole walnut stock and wever scope scare me but I'm gonna try it out I wonder.?

Good gosh C.D. looks like the Remington 700 will eat anything. Nice shootin.

Hey CD, can you do a video about your Tacoma and how it works for you for hauling your gear and stuff?

@cavedweller1959

2 жыл бұрын

The Tacoma is sick right now, going to see the auto doc soon. Talk about it later.

I've loaded .243 for a dozen years and for me I prefer 70gr smks with 44.2 of 760. That gave 3475 avg 10 shots. Imr 4451at 41.1 for 3099. The 4451 I use for 600+. 22" bull 1/9 twist. Love the .243 and my 25-06.. Aim small, miss small.

A good day!

75 Sie HP and roughly 41 grs IMR 4895 is my go to load.

The 58 grainers also make fur go splat.

@cavedweller1959

2 жыл бұрын

Saw a box of those in a shop a few days past, If I see them again I'm going to snag them.

Im puting together a 6×45 going to try the 58vmax and the 75vmax

I have a Remington 700in 243 with a 26"barrel my like the 90gr nosler BT

The 700 I'm bedding is a .243 Win. It was already a 1 inch gun. But not many dogs in VA. Just a ground hog every blue moon. CD laid waste with the Tikka.

CD, I'd like to see a new Mossberg Patriot: How I made It Shoot. It's really a pretty gun....with a bad reputation for being inaccurate. And it's affordable.

@cavedweller1959

2 жыл бұрын

Love to give it a whirl, just don't see Mossberg rifles around my parts.

So made a couple batches up. 65vmax Col-2.599 40g of varget. Using ruger .243 22 in. bolt gun suppressed. At 50 yards 3inch low At 100 yards inch low. At 200 yards on money. Zero at 200 yards. Does those numbers sound right for that bullet? That's what im getting. Also what should i expect at 300 yards and 400 yards? Thats for all the info..

@cavedweller1959

9 ай бұрын

Your scope rings are way too tall..............

♫ Saw an ad in the paper Said the hell with it all, Took a gig with the circus As the human cannonball ♫

Like 243 good video

With the glass bedding. I'm already past the point of "I should have stopped while I was ahead." And One-Shot is some high dollar stuff. I found this: CRC 3084 Dry Moly Lube, (Net Weight: 11 oz.) 16 oz Aerosol Can, Dark Gray - $10.81- Amazon I'll let you know how it does.

@cavedweller1959

2 жыл бұрын

Sure to pre-test before the real deal.

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 The moly lube is like dark primer. Goes on like spray paint. So you're still breaking a bond. Don't use. Used a tin can to test.

@cavedweller1959

2 жыл бұрын

@@Zero-xc2pr What are you saying, spray paint?? Can you wipe it off when done? What did the tin can test say? Don't use?

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 Rubbing alcohol will remove the dried moly.

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 Well.....I finally broke down and got some Hornady One Shot. My wife beat me (again), but in the ER I copped some surgical tubing.

I ordered the Boyd's A17 nutmeg stock on sale at OpticsPlanet for $158.00 (166.00 w/tax delivered). I'll figure out how to post some pictures after my bedding escapades. I gotta admit, epoxy is fun stuff. And having Boyd's to fall back on, in case I have to burn mine off the barrel.

@cavedweller1959

2 жыл бұрын

Hope your going to start off on the right foot & use e-pox made for the job and not something made for radiator leaks. And whatever you use for release agent, give it a dry run on something inexpensive.

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 Thanks CD. I'm used to the Marine Tex now. But I'll do the soup can test with the One Shot. I just like the charcoal gray color. The shoe polish as a release agent leaves prints. That's really my only issue.

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 I got the One-Shot. I see what you mean. Dries to stay put. I'll use it this weekend.

@Zero-xc2pr

2 жыл бұрын

@@cavedweller1959 The CRC Moly-Lube works. Did my 700.

hi buddy how are you finding it getting bullet heads over there we in uk are finding it hard getting components.🇬🇧

@cavedweller1959

2 жыл бұрын

No powder or primers to speak of, you can find Hornady bullets most any gun store, other brands not so much.

@justinpaffvett3367

2 жыл бұрын

@@cavedweller1959 I'm trying to get some 264 hornady 129gr sst non in the uk buddy

Have you tried the 58 grain yet?

@cavedweller1959

10 ай бұрын

Not yet, but it might happen in the not to distant future.

My 6mm rem shoots. As good or better. rifle ranch barrel 200 yard head shots on beaver imr4350 powder 87 grain sierra hollow points

The owner of DuraCoat, Steve Lauer has passed away.

what's the stock you have on that gun?....

@cavedweller1959

Жыл бұрын

Manners T4. Very good stock for dog shooting.

You,re a wanabees dream come true .Always learn stuff from your vids