Thank you for taking the time to make an informative video!

@kpizzlemynizzle922

Жыл бұрын

That was very polite!

Wow! That looks so good, good job Danny

Looks amazing 🤩

Enjoyed watching this!

What type of paint did you use on the spray machine?

Thank you. This was very helpful.

@DPTubs

3 жыл бұрын

Glad you enjoyed

I like how you always put your safety first and show us how to, such as the venting etc. Great job!

@kpizzlemynizzle922

Жыл бұрын

Whats the fun in venting?! sheesh!

i noticed a lot of products listed that you may or may not used but like fiberglass resin as well as fiberglass cloth ,that is a lot more involved than you show in the video

Great channel sir!!

@DPTubs

3 жыл бұрын

Thanks Moises!

Thank you for sharing this. What kind of paint did you put on?

Would love to know if you can just touch up using flex seal BEFORE shower base gets nasty. At some point the base of the shower was bleached and its becoming harder and harder to get clean. I can still get it clean but Can I just flex seal it after cleaning?

Please help, my Bondo high bond started lifting from my primed tub. Looked fine as it was applied but after 4 hr, I see lifting on 1/4 of the perimeter of patch. I used entire qt and worked with 3 -4 in wide mix at a time and used the material in this video:( Was sanded with 120 grit before the 123primer.

If you had to put foam below for support. What product would you use? Thx!

I have a very nicely tiled shower ... and a very ugly fiberglass pan. It would be a very big job to remove it and replace with tile. In addition to spraying white, have you sprayed other colors and are there any other methods of creating a tile-like surface? Thanks

Hi there can you please tell me what type and brand did you use to spray paint 3-4 coats? Thank you in advance.

Thank you! I’m in a rental and wonder if my landlord would notice if I revitalized the horribly stained up old shower pan. 😂

So what was the rustoleum appliance paint for?

Nice

Is that Zinsser 123 primer the water based or oil based veriety?

Good video but you left out an important step, what type of paint do you use?

Nice videos thanks for sharing, what kind of respirator cartridges you recommend to prevent fumes inhalation?

@DPTubs

3 жыл бұрын

I use 3M Respirator 6212 with NIOSH 6100 cartridges and 5P71 filters

Nice Video. What settings do you use on your Wagner Flexio for applying Krylon Tub and Tile 2 part Epoxy?

@DPTubs

3 жыл бұрын

I have it on setting 4 with high air pressure for first coat and then 6 with high air pressure after that for next 2-3 coats.

what is the best primer and paint to use?

What paint did you use at the end ?

WoW! Great video how much does it cost?

start to finish... how long might a job like this take?

What product do you use to reglaze

Which brand paint and primer

The most important question is what did you use for the top coat?

My shower like this has like a flower design I guess to guide the water to the drain or whatever so how would this work for that

@DPTubs

2 жыл бұрын

The same! Just have to make sure to clean out those small channels really well and spray primer and top coat just as I did in this video.

Could you please tell me the exact Wagner gun setup u have here,thanks

@DPTubs

3 жыл бұрын

Flexio

Looks fantastic! I need to repair the bottom of my 40 year old fiberglass tub/shower. It has some surface cracks on the bottom. I've watched all of your videos and I want to give it a try. I'm just stuck on finding matching paint. Where would you reccomend I look for sand/tan color?

@DPTubs

3 жыл бұрын

To match a fiberglass unit there is a rust oleum spray called Satin Shell White at Home Depot...try that! Otherwise go online and look up Homax Tub and Tile Bisquit.

@lisawinfield8982

3 жыл бұрын

@@DPTubs Thanks so much! I'll check home depot tomorrow 🙂

@wazup3333

9 ай бұрын

​@@DPTubshey what do you do when theres silicone/caulk where the pan/ tub meets wall ? Do you remove it before painting? What's your easiest fastest method to remove that silicone?

Great video, need to tackle my shower pan issue. Question about the wagner flexio paint sprayer, is there a cheaper option like canned spray paint or do you have to use a paint sprayer to get this type of job done?

@DPTubs

2 жыл бұрын

You can try Homax tub and tile or Rustoleum tub and tile but the quality of the finish is not as good. You also need to make sure you spray a thick enough coating.

👍🏻👍🏻

What kind of paint were you spraying w/ the Flexio? Looks like a great project. Please identify that paint tho.

@DPTubs

2 жыл бұрын

For DIYers you can use Krylon Tub and Tile! For professionals you can use Resurface Solutions

@robinhardison5817

2 жыл бұрын

You said in the video you were spraying Flex-Seal. So are you now saying you used something different?

@ceecee4823

2 жыл бұрын

@@robinhardison5817 Flexio was the name of the spray gun he was using. He didn't say in the video what paint he was spraying.

How does the Krylon compare to NAPCO in your opinion?

@DPTubs

3 жыл бұрын

I haven’t had much experience with Napco White. As far as comparing to Midwest Chemicals...Krylon is easier to work with when spraying but Midwest I feel is a stronger product. However, Midwest overspray gets everywhere and is super sticky. Krylon is nice and thick and I like how they sell an aerosol spray for touch ups.

Danny you really do amazing work. I wonder do you advertise or is your business word of mouth? Do the places that have the supplies available to the public have your card and refer you? Maybe you get some jobs from here. I grew up in a family of painting contractors. The business passed down from my. Great Grandpa,, to my Grandpa, then my Dad and now my brother in law. The interesting this is. It always passed to son in laws not sons. So, I am curious about your business. I adore your work I wish you were closer I could use you in my shower. I have been considering switching it out for a little walk-in tub. I will be looking forward to your next video until then I am keeping you and your's in my thoughts and prayers please stay safe, take care and God bless!

@DPTubs

3 жыл бұрын

This channel is not for business! I do a separate business marketing. This is completely separate.

@BambiCole

3 жыл бұрын

DP Tubs & Home Repair: Oh yes I understand that I just was wondering about how you advertise. You are so very good that it peeked my curiosity. My family business was always in the phone book and the paint stores might refer someone but it was mostly just word of mouth. So I was just wondering, I didn't think that was what you were doing here at all.

What product was used in the spray gun for the refinishing?

@DPTubs

Жыл бұрын

Resurface Solutions

What type/kind of paint was that? Is using a spray gun the only way to apply that paint?

@DPTubs

3 жыл бұрын

You can roll it but it’s not as uniform and smooth. Krylon Tub and Tile two part epoxy

I have a tub that’s flaking. Should I sand it first? I don’t think it’s been glazed before

@DPTubs

2 жыл бұрын

Most original tubs do not flake. If it is flaking I would assume it has been coated before. Send a picture of the tub to me in my email and I can help you decide how to handle it.

@jorge3234

2 жыл бұрын

@@DPTubs Thanks will do!

@jorge3234

2 жыл бұрын

@@DPTubs what’s the email?

So a regular paint sprayer works for this?

@DPTubs

3 жыл бұрын

HVLP....You can use the Wagner Flexio for DIY users, may be more affordable, or you can get a Titan Capspray 75 HVLP for more professional use.

On average how long does reglazing usually last on a tub or shower pan before it needs to be reglazed again?

@DPTubs

3 жыл бұрын

I give a two year workmanship warranty but if taken care of properly, cleaned regularly you will see it last 5 years and up.

@brianholiman6283

2 жыл бұрын

What product did you spray on the pan ?

@jorge3234

2 жыл бұрын

I heard 5-10 years

Please explain what paint product used for the airless gun,... any thinning process... Also, what primer is recommed to adhesion properties.

@DPTubs

Жыл бұрын

I only use an HVLP spray system. I’m not sure what would be considered for an airless system

Hey 👋 Danny I am also a tub& tile refinisher and I am so ready to star my own business but all I need is we’re to buy my paint. I want to buy it from Midwest chemicals but I think they don’t just sell it. I think you need to have some type of license right?? Pls let me know thank you 🙏

@DPTubs

3 жыл бұрын

Yes! You can call and talk to them and let them know you are starting out. Or try another company that has great coatings called Resurface Solutions. If you want easy over the counter Tub and Tile kit you can get Krylon Tub and Tile from Sherwin Williams

@hectorvela5155

3 жыл бұрын

Thank you 🙏

Oh wow. Want to come do mine? Lol

@DPTubs

3 жыл бұрын

If you’re in Vegas I definitely can.

Thanks for the great videos, huge fan. My question is , that Wagner sprayer you are using looks like the Wagner 350 HVLP Handheld Sprayer $99 dollars and not the Wagner Flexio $159.. Can you please verified .. Thanks.

@DPTubs

2 жыл бұрын

I have both but I mainly use a Titan Capspray Maxim II ...if you are DIY I would use either Wagner.

@joesanchez7920

2 жыл бұрын

@@DPTubs You are the best.. thanks

What kind of pain do you use ?

@DPTubs

2 жыл бұрын

Resurface Solutions

Try cleaning it with Easy-Off Fume Free oven cleaner, the blue can, not the yellow one.

I would only use Marine Paint for fiberglass boats. You will never have to do this job ever again if you do it properly the first time. By "properly" I mean that you remove ALL previous paint if any, and you follow the instructions on the paint can and use high quality paint brushes and rollers.

How much do you charge for this?

@DPTubs

3 жыл бұрын

About $250-$300

A pan like this one is 200 dollars new? What do you charge to do this?

@DPTubs

9 ай бұрын

Possibly but you would have to take out the walls around it too to get the old one out

can't hear you over the music playing

Paint brand?

@DPTubs

11 ай бұрын

Resurface Solutions

Isn't that slippery when it is reglazed?

@DPTubs

3 жыл бұрын

No! Not any more than a regular tub! It’s the shampoos and soaps that make it slippery

@ronaldcapulong1442

3 жыл бұрын

@@DPTubs Wow thank you! I will just reglaze my shower base instead of replacing it. It's hard to find the same size. I will follow what u did on reglazing it, that's why I subscribed on your channel. Goodluck always man and thank you so much for sharing what you're doing.

@DPTubs

3 жыл бұрын

@@ronaldcapulong1442 you can also add shark grip sold at Sherwin Williams to the final coat for a non slip at the bottom

@ronaldcapulong1442

3 жыл бұрын

@@DPTubs Oh great! I will check it out. Thank you.

Thanks but you only showed the primer not the brand of paint

He shud have clearly listed all products in description

@DPTubs

2 жыл бұрын

Maybe one day! Or maybe I will write and ebook and you can buy it!

@XanderBeckett1

2 жыл бұрын

@@DPTubs buy my stuff - more valuable

Paint

music is way too loud

************* W A R N I N G *************** THIS VIDEO @ THE 1:45 MARK HAS PULSATING FLASHING THAT COULD TRIGGER A SEIZURE. This is a very reckless / dangerous edit to add to your videos without a disclaimer.

Does youtube require terrible annoying music. Adds nothing good to your site. Info GOOD, music BAD..

Man I can’t stand this music

Did you forget we came to hear you, not fight annoying intrusive background music? It is beyond me why KZread content creators think it necessary or cool playing background music over their voice. Many folks have hearing difficulties, thus with the music it makes it difficult to understand what is being said. Okay, they can turn up the sound, D'uh, it turns up the music as well. The background music quickly becomes an impediment to an otherwise important and helpful video.

@DPTubs

Жыл бұрын

Sorry!

remove the music, you don't need it. Annoying.