type of videos are very usefull in construction

@BuildwithHD

3 ай бұрын

Thank you sir

Sir can we put this aluminium sheet directly on roof or putting under sheds is right choice.

@BuildwithHD

Жыл бұрын

if u put on direct roof then material will damged

Is it ok for ceiling after this gilm installation

@BuildwithHD

Жыл бұрын

yes

Should i keep some gap between sheet and insulation??

@BuildwithHD

Жыл бұрын

if you have the option to give gap in between that then go for it that will give you the best result

rate for 800 squire feet?

What r the sizes available and thickness

@BuildwithHD

Жыл бұрын

we use an 8mm thickness product size of 1.25*40M. different sizes also available according to the thickness 4mm,8mm, and 12,20mm are also available in market

Which roof you use type?

@BuildwithHD

Ай бұрын

All

how much you charging for laying under the sheet for sq feet? near Tiruchendur

@BuildwithHD

6 ай бұрын

10₹ to 12₹ per sqft

@syednoohu8692

6 ай бұрын

​​@@BuildwithHD material and labour cost and plus any? If 300sq ft, then Rs3,600?

Where your service available?

@BuildwithHD

Жыл бұрын

uttarakannada. ( we will ship product all over india)

Can you deliver in Guwahati

@BuildwithHD

Жыл бұрын

Share more detailes in whats app (9663912013 )

best price for 3000 sqft pls ..

@BuildwithHD

Жыл бұрын

please contact us @9663912013

260 square feet tin roof price in Kolkata?

@BuildwithHD

Ай бұрын

No notavilble

What is the life of this bubble sheet?

@BuildwithHD

2 ай бұрын

10++ year under the roof

@kingsingh9367

2 ай бұрын

1 day if you have an energetic dog

Mujhe Ghar banne wala ka no chahiye

@BuildwithHD

8 ай бұрын

Local dundo bhai

Price of 8 mm sheet

@BuildwithHD

Жыл бұрын

8mm 20₹ per sqft . if you need more then 1000sqft then call us we will give you best price

@mdjuber9262

Жыл бұрын

@@BuildwithHD give me number

@BuildwithHD

Жыл бұрын

@@mdjuber9262 9663912013

Can you deliver in Mumbai ? Can I get ur num

@BuildwithHD

Жыл бұрын

sure 9663912013

This is not how radiant barriers work. Please don't waste customer's hard earned money. Radiant barrier needs a gap in between to function properly.

@BuildwithHD

2 ай бұрын

@super-z8943 Yes, you are right. In a typical radiant barrier like plain radiant barrier foil, an air gap is necessary for it to work effectively. However, we are using an 8mm thick bubble sheet layered with pure aluminum foil on both sides, which works differently from traditional radiant barriers. While it performs better with an air gap, it's not mandatory for this particular product. Without an air gap, its efficiency may reduce by approximately 20 to 30%, but it will still function effectively. By using this method, we help our customers save money by reducing labor costs. Please check our other video where we include an air gap. However, this requires additional labor, which can be a significant expense for some customers. Therefore, we need to choose the right installation method based on the customer's budget and needs. As a service provider, it's crucial to balance customer budget considerations and scientific principles. As a science enthusiast, I can confirm that while an air gap is beneficial for radiant barriers, it is not always necessary for our specific product. here is the video link kzread.info/dash/bejne/ZYaelZaMda_eqaw.html

@super-z8943

2 ай бұрын

@@BuildwithHD Ok, here is my take on this. If you perfectly glue a radiant barrier ( single sheet foil) on the inner side of the roof sheet, it will have zero effectiveness. Now, since you are not gluing the barrier to the sheet and bubble-foil surface isn't perfectly flat levelled, there are some pockets of gaps where the radiant barrier is still working to some degree. That is how it is still 'working'. Economics of installing a gap is another concern, hope you have made your customers aware of the compromise they are making. Interesting part is the 2nd foil on the bubble sheet. When the 1st foil fails due to inadequate gap, the 2nd foil comes to rescue and works as expected, as it has decent gap due the air bubbles. But then the 1st foil reflects back this heat reflected by the 2nd foil. This will heat up the surrounding air via convection heating. So, none of this is working in an efficient way. A solution of this would be radiant barriers with single foil installed with foil side inwards. This will give the necessary gap and customer won't have to pay for double foil barriers.

@BuildwithHD

2 ай бұрын

@@super-z8943 Yes ,we always tell people to give air gape but sometimes people want to save money so they use this method so we cant say No 1: Yes your explanation is 100% right im agreed

give me your mobile

@BuildwithHD

5 ай бұрын

9663912013