Refinishing and installing a used 35' commercial flag pole from craigslist.

I bought a used 2001 35' commercial flag pole from Craigslist that had been replaced by a new 80' flag pole. This video shows the restoration and installation of the pole sped up 32X. I used Hydroflouric acid first and then rinsed it with water. Then I used 150 grit sandpaper and then red Scotch-Brite before covering in Rustoleum clear coat.

Пікірлер: 59

  • @roadking99jokerst60
    @roadking99jokerst604 жыл бұрын

    Just coincidently I placed a pole last Sat. Momentarily flew a 48 star flag for my late Dad.Got a fresh, good quality flag on now. Stay proud.

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    Love it! I am really proud of my flag pole and I look at it every day and have gotten quite a few compliments from the community about it. I also love putting a fresh flag up. Around here I use it to determine wind speed and direction a lot.

  • @wayne251975
    @wayne2519754 жыл бұрын

    I don't know what to say. For some reason this strikes an emotion within my soul that few things do. In a time so many have not a clue about life and the pursuit of happiness, it defies logic how we fostered such a lost cause attitude towards our way of life. With tears in my eyes, the spirit your project brings to many is greatly appreciated by a many of us. The spirit is alive and well amongst far more of Us than those that hasn't ever paid a price of some kind for the betterment of our Country and Allies. God Bless you for your love of our Flag, Country and the people we disagree with but still protect them all the same. Thanks again a thousand times over.... Looking forward to possibly the most important 4th of July I've had in my lifetime ...

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    Thank you for the comment! I take great pride in the flag, our nation and this flag pole.

  • @FarmerMD
    @FarmerMD7 жыл бұрын

    love the video - well put together. The flag looked great in your snowplowing video!

  • @cdm1250uhf1
    @cdm1250uhf15 жыл бұрын

    I would too, fly it high and proud, thank you!!!!

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    Thank you.

  • @greenhorn4052
    @greenhorn40529 жыл бұрын

    Thanks Clarence, there was a lot of work to get to that part and I was really proud to get to raise it up that first time.

  • @Mary-had-a-lil-farm
    @Mary-had-a-lil-farm4 жыл бұрын

    Wow cool video. Great job putting that pole up. It was picture perfect as you were raising the flag. The sky was beautiful and the wind caught the flag at just the right time 🙂.

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    Thank you, I really enjoy that flag and the project.

  • @featheredcoyote5477
    @featheredcoyote54773 жыл бұрын

    Cleaning my 40' aluminum flagpole that I recieved as a gift. It's about 25 yrs old and I always come back to your video. Appreciate ya and Happy Flag Day 6/14/21🇺🇸

  • @indianabowhunter9471
    @indianabowhunter94715 жыл бұрын

    I got tears at 2:45

  • @fryguyslim
    @fryguyslim2 жыл бұрын

    Great video!

  • @greenhorn4052

    @greenhorn4052

    2 жыл бұрын

    Glad you liked it!

  • @greenhorn4052
    @greenhorn40529 жыл бұрын

    R Manchester, thanks for the input. This is my first time finishing metal. I have used hydrofluoric acid to shine up some aluminum rims on our wheat truck but that is it. I spoke to a friend who works with aluminum as a profession and he suggested the sand paper, scotch-brite and clear coat as a finish. It began very oxidized and ended up pretty shiny. I don't know how long the clear coat will last where the flag and cable rub on the pole. When I talked with a couple of professional flag pole installers they suggested skipping the clear coat and letting it oxidize naturally. I would do it my way again using the same method to answer your question. I am very happy with the finish.

  • @brianm8642

    @brianm8642

    6 жыл бұрын

    I know this is an old post, but I just salvaged a 20' flagpole from disuse that had been just sitting there. It, too, needed refinishing and so I made a lathe in the yard! I made a wooden pulley and attached it to the base of the pole and used a 1hp motor I had laying around to drive it. The top of the pole rode on a pair of roller blade wheels mounted to a base (on a stack of bricks lol). It spun about 300 rpm or so, based on my quick math. It was easy to just walk along the pole and sand while spinning! Finished it with clear coat and a coat of wax too.

  • @cdm1250uhf1
    @cdm1250uhf15 жыл бұрын

    BEAUTIFUL!!

  • @greenhorn4052

    @greenhorn4052

    5 жыл бұрын

    The flag truly is beautiful and I love that flagpole. I look at it with pride every day.

  • @snoble1981
    @snoble19813 жыл бұрын

    Go Cougs! and God Bless America

  • @greenhorn4052

    @greenhorn4052

    3 жыл бұрын

    Amen Brother!

  • @danielmarshall4587
    @danielmarshall45872 жыл бұрын

    GLORIOUS.

  • @TheTraveler976
    @TheTraveler9763 жыл бұрын

    Very nice 👍

  • @kennyc388
    @kennyc3884 жыл бұрын

    Thumbs down from 9 turds. Awesome project and flag.....well done.

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    Thanks Anton, I love my flag and enjoyed the project.

  • @ghilreese3413
    @ghilreese34138 жыл бұрын

    Very nice video.

  • @greenhorn4052

    @greenhorn4052

    8 жыл бұрын

    +Ghil Reese Thank you Ghil. Just gotta make sure the flag is the focus.

  • @curlyproductions
    @curlyproductions8 жыл бұрын

    Geez I'm liking everyone of your videos. Don't stop now. Please reply to my comment about sharing. I know my father and his friends would love to watch.

  • @greenhorn4052

    @greenhorn4052

    8 жыл бұрын

    +curlyproductions Feel free to share any of my videos, I enjoy sharing life on the farm.

  • @curlyproductions

    @curlyproductions

    8 жыл бұрын

    Awesome thank you!

  • @rontina8686
    @rontina86869 жыл бұрын

    Love the video ..thank you / Question, if you had it to do over again, would you use the same method to clean it?

  • @fireroadie6654
    @fireroadie66547 жыл бұрын

    Just awesome

  • @greenhorn4052

    @greenhorn4052

    7 жыл бұрын

    Thanks!

  • @inmatruckyo1400
    @inmatruckyo14004 жыл бұрын

    excellent!

  • @photoguy73
    @photoguy73 Жыл бұрын

    Very nicely done. I am going to refinish my flagpole to remove dark marks apparently caused by brass hardware holding the flag and banging into the pole for years. I am wondering if you found the Hydroflouric acid helped a lot? Do you know the strength of the acid you used? Where does one purchase stuff like that? Did the sandpaper take off dark marks? Thanks.

  • @greenhorn4052

    @greenhorn4052

    Жыл бұрын

    It really cleaned it up. Mine has gotten dark marks again from the same issue. I got the acid from a dairy supply store. They use it a lot to clean their stainless tanks. It wasn't very expensive and they recommend the dosage. I am not sure what it was. I really enjoy the flag pole though. I hope yours turns out really nice!

  • @jw4620
    @jw46208 жыл бұрын

    Looks real good! I'm curious as to how far they had to haul the ready mix?

  • @greenhorn4052

    @greenhorn4052

    8 жыл бұрын

    It is about 35 miles to where we do our banking and grocery shopping and also concrete.

  • @user-xp8qz1cc8z
    @user-xp8qz1cc8z4 жыл бұрын

    who are the 9 jerks that didn't like this video?

  • @johndiblasi5018
    @johndiblasi50186 жыл бұрын

    Just watched your video i just got a 30' pole and its full of stains from the iron from a sprinkler. You think that hydrofluoric acid will work? If so where did you go about getting it i only see places online.

  • @greenhorn4052

    @greenhorn4052

    6 жыл бұрын

    john diblasi, you may need to sand some too but I would sure try it. It will clean the whole pole. I live in an agricultural area and I purchased agallon of mine at a nearby dairy supply store. They use it to clean stainless steel tanks.

  • @AntPDC
    @AntPDC7 жыл бұрын

    Great job. Patriotism is often seen nowadays as somehow decadent, even proto-fascist. Well bollocks to that - I fly my country's flag with great pride, albeit on a flagpole not nearly as brilliant as yours. Best wishes.

  • @greenhorn4052

    @greenhorn4052

    7 жыл бұрын

    Thank you, just because we are patriotic or proud of our own country doesn't mean that we are disparaging our putting down someone else's country. Fly your country's flag proudly wherever you live.

  • @AntPDC

    @AntPDC

    7 жыл бұрын

    It's worse than that Greenhorn: it's some of one's own countrymen and women whose political correctness has poisoned any decent sense of patriotism in the name of "multiculturalism" and "diversity". I'm all for both, but integration with the host nation is paramount, else they don't get to come and enjoy the privilege.

  • @greenhorn4052

    @greenhorn4052

    7 жыл бұрын

    Very well put and right on the money!

  • @danielmarshall4587

    @danielmarshall4587

    2 жыл бұрын

    TRUE.

  • @davejoyal9286
    @davejoyal92866 жыл бұрын

    What did they charge for that used pole, if you don’t mind me asking? I’m going to ask some local businesses that seem to no longer user their flag poles if I can buy and remove one.

  • @greenhorn4052

    @greenhorn4052

    6 жыл бұрын

    Dave Joyal , I paid $500 for this pole. It needed cleaning and is a 35' commercial interior crank halyard. It also came with the tube that you cement in and a 10'x15' flag in great shape and a 6'x10' flag. The guy was upgrading to an 80' pole. I would recommend looking at Taco Bell if you want a large pole and asking them. They all took down their American flags around here and have stood empty the last few years.

  • @davejoyal9286

    @davejoyal9286

    6 жыл бұрын

    Greenhorn 40 thanks for the reply! You’re flying a 6x10 I take it? Did any parts need replacing? Does the truck still revolve freely? I ended up finding a used 30’ internal halyard (like yours) commercial fiberglass poll. Strong, yet really light weight. Got it for $100, but so far have spent about $400 in new parts. It didn’t really need them, I just wanted everything new. New halyard, snaphooks, beaded retainer ring, counterweight, truck, ball top, flag, crank handle for internal winch, etc. it all adds up fast. Great job and thanks for posting this video!

  • @c.d.5490
    @c.d.54906 жыл бұрын

    very nice. wish us Canadians took as much pride but all you see up here are torn up sad ass flags flappin in the wind

  • @greenhorn4052

    @greenhorn4052

    6 жыл бұрын

    C. D., I wish that everyone was patriotic and proud of their own country and it's flag. The sad thing in the U.S. these days is that half of the country is embarrassed to be proud of our flag, pathetic really.

  • @jayybren
    @jayybren4 жыл бұрын

    Is this song a true story like the video?

  • @greenhorn4052

    @greenhorn4052

    4 жыл бұрын

    The song is awesome and there is a new version just released by the original artist Lee Greenwood.

  • @BelindaWoodson
    @BelindaWoodson11 күн бұрын

    #This is (The United States of America( Soil (BE OUR GUeSt) #Big and Tall

  • @JC_66644
    @JC_66644 Жыл бұрын

    10 meters! not 35 ft

Келесі