Reeving two triple sheave pulleys for mechanical advantage.
Жүктеу.....
Пікірлер: 37
@denniscurless9042 жыл бұрын
Done correctly, learned to do it this way and used at my job for the next 41 years.
@1stpagelocal7 жыл бұрын
Really appreciate this ! Borrowed the 6 pulley block and tackle, but had no way to figure out how to use it. Now I'm ready to go lowering 5 - 120 pound blocks from an old chimney down through the living room ceiling. Thanks again.
@dennisdanich71907 жыл бұрын
Thanks you did a nice job and solved a problem for me 😀
@lights800886 жыл бұрын
Excellent video, thank you.
@shivdaschodankar1633 Жыл бұрын
we used to pull 3 to 5 tons of ship offshore by using this method. Big ships were pulled offshore by using another method manually. It reduces manpower to pull heavy objects.
@allen.lpersingerjr64087 жыл бұрын
Thank you so much , I have been wanting to know the proper way are corect way to do this ,I thank you sir very much.
@erikaslt5 жыл бұрын
Becket is basically a clove around the rope. Also helpful video. But much more helpful if the blocks were hung.
@JohnnyLawBMC Жыл бұрын
Nicely done, thank you
@rowgler16 ай бұрын
Thank you, good to know. It's better when they run smoothly.
@treegasmicthearborist57636 жыл бұрын
what brand are these or could you tell me where i could buy these?
@christinamoneyhan5688 Жыл бұрын
Ok , so this is a force multiplier correct ? If so how do you calculate the amount of pull before the rope fails. N other words, can’t he rated rope strength be multiplied by the amount of pulley sleeves ? Anyone ?
@bobdudley98067 жыл бұрын
nice video, easy to follow
@DeltaAgent264 жыл бұрын
how would you reeve a double quad?
@transfersystemsptyltd59552 жыл бұрын
Excellent practical video - thank you.
@pdloder10 ай бұрын
Why are the blocks perpendicular to each other? Why start in the middle of one? Lots of why's.
@michaelsnell40344 жыл бұрын
I started building a block and tackle system with 4 pulleys in each block. How would that differ?
@silvaaa70
3 жыл бұрын
I have the same question. Did you ever find the answer?
@bowlineobama6 жыл бұрын
I confused when you said top and bottom. Which is the top and which is the bottom?
@michaelsnell4034
4 жыл бұрын
I believe top and bottom are relative to the surface you are rigging the ropes on.
@user-ip3tf6tf7d7 ай бұрын
Really good
@jongsookim6366 жыл бұрын
downside(abc)-upside(123) b3a1c2 & tie up :) thank you
@edwardjones81707 жыл бұрын
Thanks much, I think I'll put little arrows and numbers on each sheave :)
@jnssprayenggsolutionsinc78562 жыл бұрын
you are geneious
@josmarmanosales47587 жыл бұрын
Muito bom
@liquidpaint26484 жыл бұрын
You gives us the better part but you definitely needs a camera person
@andycapp8843
2 жыл бұрын
It’s a free tutorial video, learn from it and be grateful, perhaps offer a little thanks.
@tiendungbui26276 жыл бұрын
ok👌
@henrycupps4846 жыл бұрын
Becket was out of frame......
@lucfournier3939
4 жыл бұрын
Yes it sucks
@kentuckycriedfricken Жыл бұрын
hot
@ChristopherBix8 жыл бұрын
Informative, but what a sloppy job.
@denniscurless904
2 жыл бұрын
Show your ability to do a neat job!
@ChristopherBix
2 жыл бұрын
@@denniscurless904 Sure Denny. I’ll get right on that. 🙄
@TheCompanion-gx5bz Жыл бұрын
This video stinks because the explanations are not clear and the camera cuts off the knot tying.
@jborkowski3332 жыл бұрын
Using my wife’s account, to leave a comment. Horrible camera work and a very weak job of describing how to do that. When you want to describing how to do something in an instructional video. Maybe try and imagine your audience like it’s fourth graders so you can dumb it down. Sorry to be so harsh, but that was a waste of five minutes.
@dennisdanich71907 жыл бұрын
Thanks you did a nice job and solved a problem for me 😀
Пікірлер: 37
Done correctly, learned to do it this way and used at my job for the next 41 years.
Really appreciate this ! Borrowed the 6 pulley block and tackle, but had no way to figure out how to use it. Now I'm ready to go lowering 5 - 120 pound blocks from an old chimney down through the living room ceiling. Thanks again.
Thanks you did a nice job and solved a problem for me 😀
Excellent video, thank you.
we used to pull 3 to 5 tons of ship offshore by using this method. Big ships were pulled offshore by using another method manually. It reduces manpower to pull heavy objects.
Thank you so much , I have been wanting to know the proper way are corect way to do this ,I thank you sir very much.
Becket is basically a clove around the rope. Also helpful video. But much more helpful if the blocks were hung.
Nicely done, thank you
Thank you, good to know. It's better when they run smoothly.
what brand are these or could you tell me where i could buy these?
Ok , so this is a force multiplier correct ? If so how do you calculate the amount of pull before the rope fails. N other words, can’t he rated rope strength be multiplied by the amount of pulley sleeves ? Anyone ?
nice video, easy to follow
how would you reeve a double quad?
Excellent practical video - thank you.
Why are the blocks perpendicular to each other? Why start in the middle of one? Lots of why's.
I started building a block and tackle system with 4 pulleys in each block. How would that differ?
@silvaaa70
3 жыл бұрын
I have the same question. Did you ever find the answer?
I confused when you said top and bottom. Which is the top and which is the bottom?
@michaelsnell4034
4 жыл бұрын
I believe top and bottom are relative to the surface you are rigging the ropes on.
Really good
downside(abc)-upside(123) b3a1c2 & tie up :) thank you
Thanks much, I think I'll put little arrows and numbers on each sheave :)
you are geneious
Muito bom
You gives us the better part but you definitely needs a camera person
@andycapp8843
2 жыл бұрын
It’s a free tutorial video, learn from it and be grateful, perhaps offer a little thanks.
ok👌
Becket was out of frame......
@lucfournier3939
4 жыл бұрын
Yes it sucks
hot
Informative, but what a sloppy job.
@denniscurless904
2 жыл бұрын
Show your ability to do a neat job!
@ChristopherBix
2 жыл бұрын
@@denniscurless904 Sure Denny. I’ll get right on that. 🙄
This video stinks because the explanations are not clear and the camera cuts off the knot tying.
Using my wife’s account, to leave a comment. Horrible camera work and a very weak job of describing how to do that. When you want to describing how to do something in an instructional video. Maybe try and imagine your audience like it’s fourth graders so you can dumb it down. Sorry to be so harsh, but that was a waste of five minutes.
Thanks you did a nice job and solved a problem for me 😀
ok👌