Grab a Nifty Lift here nifty-lift.com/

Leave the tailgate cables on, so you don't break your tailgate. That's what they're for.

@AztecWarrior69

Жыл бұрын

Just take the tailgate off.

@MBFModernHomesteading

7 ай бұрын

We just went with the farmers advice as to what he does, luckily no harm was done to the tail gate.

Holy Crap! Why is everyone so worried about the tailgate? It's his tailgate, he can do it however he wants. Get over it. On a side note, you were using the system as a 4:1 against the haybale and a 5:1 against the anchor. If you turned it around, it would move the haybale easier with a 5:1 ratio. Love this system. Albert actually tested it's break strength and it failed at about seven thousand pounds. The cord broke.

@MBFModernHomesteading

2 жыл бұрын

I have been using this everyone hunting season to hang game, love it!

A good way of testing out a new tool, now you know it will hang a deer up! ...Love y'all!

As someone else said. Lift off the tailgate completely (easy to do) or leave the cables on. You can bend the gate with the cables off and it will never close again..

@MBFModernHomesteading

7 ай бұрын

We just went with the farmers advice as to what he does, luckily no harm was done to the tail gate.

Nice small compact kit. Good to keep with the snowmobile or ATV

Nifty tool to have around for sure! Good job getting the hay off the truck.

Pretty darn good block n tackle... for it's size. I truly thought you were gonna lose your tail gate.. at the least bust it's hinges or even crumple it some! Nice job Jeremy you got it off without busting the tail gate. Hope your getting hunkered in for the winter and also hope you'll get a deer or moose for the freezer.

Thank You for Your Video. Like your comments in this video. Entertaining. Informative.

Good Canadian fun!

Drop the tailgate and drive around like a nut, it'll come out one way or the other. The placement may be off. Or just floor it in reverse and hit the brake.

Now I'm confused. I watched yesterday's video and I though you wrenched the bale off with the side by side. Was this the line from the bale's yellow strap that you connected the wench? Or did you get two bales of hay?

@MBFModernHomesteading

4 жыл бұрын

What I did in this video is exactly how I got it off. I had just one bail of hay :)

I just put a strap around the bale and loop it around a steel pound post and drive out from under the bale. Works great.

@MBFModernHomesteading

2 жыл бұрын

Thanks, we were just doing this as a demo for the block and tackle :)

Hi Good morning 👍👍👌👍😊

Been having mine 6 months or so now. Enjoy the hell out of it. My only wish is I wish he would design another that’s either double that one. And or have a good way to bolt two of them together to raise the ease of the pull even more. And still be extra compact because of the size.

@xredman002

3 жыл бұрын

the blocks don't have to be side by side

@AquaTech225

2 жыл бұрын

@@xredman002 correct. Just preferred them together, why I’m not sure. Already had one but purchased a second for that purpose. Well to use each separately to pull from different points at the same time, or be able to bolt them together and use it as a single unit. But noticed after a while an having it on hand to do so. The plate one one of them needed to be slightly different in design to be able to do that. But ended up getting with the guy. He ended up making one of exactly that two together with the side plate on one so they were able to bolt together, but with the same cord but upped it from the 1700lb to a 5000lb cord and just bought his off of him

I saw another video of you moving that hay bale.

@MBFModernHomesteading

4 жыл бұрын

This is what I moved it with.

Wile E Coyote would be proud. (This message has been sponsored by the ACME corp) One Alternative method - Strap around bale, Cable or rope from strap to tree, Start truck and drive away, Leaving bale to fall to the ground. FYI. Archimedes took the existing pulley and developed the block-and-tackle pulley system, 2200 years ago.

@MBFModernHomesteading

3 жыл бұрын

Such a good system :)

I arrived here after searching for the TS Tuf Tug.

Just remove tailgate and place the strap a quarter from the top. It will work on first or second pull. Get a single bale hauler.

One word.... Newfie!.... you crack me up

@MBFModernHomesteading

4 жыл бұрын

lol

You need to calculate for the drag or friction of the bale in the truck!

Well, I saw a ton of advertising for your social media stuff and selling your apparel but I can't find any link to this pulley system.

@MBFModernHomesteading

4 жыл бұрын

You can check it out here nifty-lift.com/

Hey Jeremy, if yall get any more bales if you got a scrap piece of plywood cut it to fit between the wheel wells in the bed screw a 2x4 to the plywood thats toward the tailgate drill a hole to run the winch cable through to remove the bale. Should just slide right out!

Wow, gonna take a while for my butt to un-pucker after watching the tailgate bend down.

@MBFModernHomesteading

2 жыл бұрын

lol, the farmer where we got it actually said that is how he does it lol

Better off with a haltrac mini hoist pulley kit. I tried 1 of these and thought it was just a bit small

@MBFModernHomesteading

3 жыл бұрын

I used it for lifting a bear last fall and it worked good for that.

Not sure why you would take the cables off your tailgate? Unless you want to ruin it.

@MBFModernHomesteading

Жыл бұрын

Honestly we just did what the farmer said he always does. Didn't hurt anything.

I know this wasn't the point. But I am thinking hust tie it to a tree and drive off

@MBFModernHomesteading

2 жыл бұрын

Ya, definitely not the way to really do it in the vid.

Hi guys!! I NEED ANOTHER BEER 🍺. I think I saw that hay get unloaded once already!! Did you put it back in the truck and unload it again?? I hope I get a answer or I going to the hospital.

@MBFModernHomesteading

4 жыл бұрын

lol, just the one bale. I was just showing what I used in this vid haha.

@mikeodonnell3390

4 жыл бұрын

Mapleberry Farm Now I have had more beers. You used the side by side and the cable to pull it off. Then you rolled it over to the side of driveway. I am confused

@mikeodonnell3390

4 жыл бұрын

Mapleberry Farm 👍 now I have it. I see I wasn’t the only one confused. All straightened out now, sorry for the inconvenience.

@MBFModernHomesteading

4 жыл бұрын

@@mikeodonnell3390 No, I used the block and tackle to pull it off haha.

Rumor is he is still pulling the round bell all over his place and his wife can not get him to stop !

@jodydavis161

4 жыл бұрын

Round bale LOl

@MBFModernHomesteading

4 жыл бұрын

Was out pulling that up and down the driveway today, a hum diddly do of a good time.

How is the tailgate.

@MBFModernHomesteading

4 жыл бұрын

All good.

It should be called the Nifty-Pull

You should have had it attached much higher that way it wasn't putting downward force on the tailgate and making it way tougher to pull out

@MBFModernHomesteading

4 жыл бұрын

Shoulda, coulda, didn't ah ;)

Why didn't u take the gate off?

@MBFModernHomesteading

2 жыл бұрын

Farmer said that is how he does it, luckily didn't hurt the gate any.

There's R-D reverse Drive or R and D what sold us on this kit cool kit to have could be really helpful to have around especially with that break

NOT FOR ME...BUT IM SURE IT WILL WORK WITH THE DEER...MAKE SOME JERKY...

@MBFModernHomesteading

3 жыл бұрын

Used it for a bear last fall, worked well with that.

Take the support cables off the tailgate ???? Smh, wtf.

@MBFModernHomesteading

2 жыл бұрын

haha, thats what the farmer said he does so we did the same. No tailgates were harmed ;)

@strawberryfields95

2 жыл бұрын

@@MBFModernHomesteading Glad he didn't tell you to jump off a bridge. Wow.

Way too heavy and hard to make. Check out a boaters Z-drag system. Dragging 600 pounds is not the same as lifting 600 pounds. Bust your tailgate yet? You will.

I don’t think I’d eat a deer tha I could kill with a pulley

@MBFModernHomesteading

Жыл бұрын

Me either, that would be a strange thing to do.

Is a Nifty-lift, not a Nifty-Pull when you pull like you did you are adding friction to the, try lifting it maybe easier.

@MBFModernHomesteading

4 жыл бұрын

You can use it for pulling too, having said that, what am I going to lift it from, a cloud in the sky ;) haha.

You and your girl could have just climed on the truck and pushed the bail off anywhere you like (being a 4x4). She'd have shown ya! (if her daddies an old school MAGA)

@MBFModernHomesteading

2 жыл бұрын

We only did it this way to test the come along haha.

sure it’s a good tool but why a whole video of doing 3 or 4 stupid things with it?

@MBFModernHomesteading

4 жыл бұрын

Because the developer wanted us to test it out. So stupid things were on the menu when ya don't need it for anything at that exact moment. Pretty normal if ya just watch commercials on tv, for example, a laundry commercial might throw a bunch of spaghetti all over some clothes just to show how well the stuff can be cleaned, kinda stupid but ya know it works.

$90. Rip-off.