It amazes me how many comment era cant tell the difference between clutch slip and wheel spin

@justindeho8892

5 жыл бұрын

Ty that thing is not right at all terrible that guy couldn't tell that it was slipping way to blow a nice engine up

@icantcomeupwithaname8925

3 жыл бұрын

@@justindeho8892 never knew clutch slipping causes the bike to start fishtailing 🤷‍♂️

thoes poor front tires

Lockup clutch and 10mm cub makes what. stock .100plus hp. And then a wet road Has no chance of traction in any gear

Would love to see a video when you actually go over 35 mph.

@milorider9659

5 жыл бұрын

Shawn Abegglen why would he go over 35 if this was his first time riding the banshee?

@dr.scottadams296

5 жыл бұрын

Yeah... it needs to be broken in idiot.

@shockedxtruth

5 жыл бұрын

Sick fucks wants to see ppl get hurt.

@rowdytillwedie

3 жыл бұрын

Yup, put that beast in dirt and lets see the pulls 1-6 my guy!

@blacksmokematters4521

3 жыл бұрын

@@dr.scottadams296 Was his 1st rip not the engines 1st break in..

Good to see another Redline build on KZread! Cameron is a true master

Living the dream I see you have an fd and a banshee 🙏🏻🙏🏻🙏🏻

That throttle response is unreal!

I ran 117 octane racing gas with 4 oz of Yamalube 2R oil per gallon. There is no warmup with that mix. It was ready to be on the pipe 1st kick. I ran it for 5 years on that mix with a stock bottom end and a few bolt ons. Toomey T5s, 35 mm carb kit, drop 1 tooth on the front sprocket. I loved that thing but I needed a $7k HVAC system for my new home. The guy said he would trade even for the unit I needed so I let it go. He ended up plowing it into a tree a few weeks afterward.

@ronniewilliz153

2 жыл бұрын

I always hear that's how the bikes ends when traded. that sucks man

No wheelies, no jumps, no dirt, 80 plus hp between your legs. Push it in that bonfire you passed and send it with an xr80...

@henuracing4431

3 жыл бұрын

@NoNoNiin 120whp

@henuracing4431

3 жыл бұрын

@NoNoNiin descissä kerto että dynolla. ihme että kytkin vituillaa ja luistaa

I love coming back to this vid and reading the new debates about the clutch, I think it’s traction Bc if it was clutch than why is he counter steering in the first pull?

The reason the gearing is kicking in so fast is because he has straight cut gears he's not even using the clutch. The bike really has a drag motor tbh but I don't blame him for wanting to just ride it also. If he was just running it through the 1/8 it would do exactly what he built it for. Tires are probably spinning also because it's wet and that bike has a lot of power to the back wheel.

@buckbundy8642

6 жыл бұрын

T2eeMan TV 😂🤣😂🤣😂🤣😂 no! Not at all!

@jamesrobert7155

5 жыл бұрын

T2eeMan TV Don't you think it's rider error too? He don't even get into the pipes, when the pb kicks in he let's off.

@MasksOfficial

5 жыл бұрын

Probably because it was his first ride on it and hes getting used to the power.

@argonunya5585

5 жыл бұрын

Man shut yo mouth dumb ass.smdh

@justincasey_grabbederpussy6756

4 жыл бұрын

T2eeMan TV 😳What in the actual fuck are you talking about??? You seriously think it’s breaking traction???😂😂😂 Such an ignorant little 🐓🍭!

is it just burning the back tires down when u nail it bro ??

Yamaha Banshee moves great video man keep it up.👍🔧⛽

That's sick! I though my old 472 banshee was nasty. That's gotta be a trip to ride. Nice job man

@pp13bnos

7 жыл бұрын

Chad Bogardus thanks! it's a blast to ride!

sounds like the clutch is slipping or is that the rear wheels not catching traction and slipping? Or gearing ? But try clutch that can take that all that power and try different size sprockets.

I love the first start ups!! Especially when the quad is already warmed up somehow!!!

What did you do spend all your money on the motor and can't afford proper/good tired?

@pp13bnos

7 жыл бұрын

My banshee is setup for sand. Only reason I put the dirt tires on, was to run the new motor. Not to mention, Slicks are they only way you would get to it hook on the street.

@tropicthunderbolt

7 жыл бұрын

Cj Brault those arnt slicks tho. Lol.

@tropicthunderbolt

7 жыл бұрын

Dan// hahaa. big words coming from your key board. watch the video idiot.

@lmCIoudz

7 жыл бұрын

i have 3 times you dumb bitch

@tropicthunderbolt

7 жыл бұрын

Dan// hahaa. ur moms a dum bitch

Dude I could practically smell that clutch just watching this madness.

@limejello9992

5 жыл бұрын

Are you insane? Do you know what the fuck a 2 stroke is?

How did it do in the dunes? It appears to come on the Band fast-by the sound

@pp13bnos

6 жыл бұрын

It does awesome. Very broad band with a ton of usable power. Its not a toggle switch like alot of ported 350s are. I uploaded a video of its first time out awhile ago.

What's up with the tires? Should do holeshots all around

Hey man nice build, would you mind sharing roughly how much did you pay to have your engine build? Im hopping to build my a 521 too

@pp13bnos

7 жыл бұрын

The cost is going to have alot to do with whatever you already have done to your engine. I already had v4s, straight cut gears, a lockout, pro-mod transmission, billet timing plate, dual pingle valve, trenched cases, etc. Your best bet is to call Cam and talk with him.

@eddyprado830

7 жыл бұрын

Cj Brault thank you

Nice video that thing is insane

I love banshees they look and sound so cool

Wouldnt it be drifting more if it was wheelspin? I have always wanted a banshee :)

@jamesdellaquila1939

2 жыл бұрын

Last time I checked it’s kinda hard to drift in a straight line

What did u rip? Your pants off? An by the looks of things a can am 1000 would be better for that area

is this in Albany Oregon?

is it as fast as it sounds and looks?

Warming up or afraid of powerband?

was she slippin the clutch? ? sounded a bit like it.

How can I make my 03 banshee sound like that and still keep it stock?.

@comoz7627

4 жыл бұрын

buy toomey t5s

sounds like your clutch is spinning

Is that stock thumb throttle actually opening up 39’s all the way?

@pp13bnos

Жыл бұрын

The housing is stock, but I have a extended thumb throttle. But yes they are opening up all the way.

Just blowing the tires off! That would be fun in the sand with paddles. Sounds killer!

I'm building a slightly smaller 496cc RZ engine, going into an RZ250 frame. From this video I think I shall be pleased. Top work Cj Brault.

@pp13bnos

5 жыл бұрын

Honestly, this video does it no justice. There is no power band, its simply power from the second you role into the throttle. I think you'll be extremely happy with a 496 in such a light frame. I hope you put up a video when its complete!

are you using the clutch to change gears or race riding it

@pp13bnos

5 жыл бұрын

Using the clutch.

I wish I still had my rz350's had both the black and yellow and the white and red tommey pipes reeds! I wish this engine was around back then.....from Wyoming USA 🔫🤠

Videos never do justice... I hate it. Love the stance if it and the sound.

what is the top speed ?

Banshee is street legal where I'm at. If not for dragracing.....what length swingarm is recommended 0 to +6? It's all street, beach, desert and high speed MX. Geez, seems you can't use all that power on the street. Will the Kenda Speed Racers help?

@pp13bnos

2 ай бұрын

Depending on power level, 4" over is pretty nice. But for larger HP, I prefer a 6" over for general duning. 8" bigger hp, and 10" for Super Cubs. I've never MX'd, so I can't speak there.

Sounds like a damn snowmobile

He did rip into it. Do you peeps not see how wet the road is? The wheels instantly spun when he hit the powerband

u olny got one gear buddy!

@jamesrobert7155

5 жыл бұрын

derick pryor Think he's scared, who knows maby he gets in the dirt and kicks ass..😂😂😂

@greenwaytruckinginc6134

5 жыл бұрын

@@jamesrobert7155 😂😂😂

@BennysUnhinged

5 жыл бұрын

+James Robert dirt vehicles on damp bitumen is terrible, especially a 2 stroke you'd have 0 traction. you rarely ever get traction in a 2 stroke but its easier to control on dirt.

@BennysUnhinged

5 жыл бұрын

hes also having clutch issues the bike isnt running properly.

@jamesrobert7155

5 жыл бұрын

@@BennysUnhinged I know all this, ive neen riding a minute, i think it's rider error, too much engine for him

Post an updated video of the thing my god that clutch sounds poopy 😭

Sand tires, big flooded fields, all the back roads and over pass, you are definitely in the willamette valley huh tons of backroads out here to drive on just got hope you don’t catch a cop on me one I live down the street from a gravel road take my 85 250r down there all time time there’s a cop that lives down there that doesn’t seem too bothered by my rides from time to time he even gives me a wave some times when I pass by great guy wish there was more out there like him

Did you have it on the dyno? If not how much power do you think it makes?

@pp13bnos

8 жыл бұрын

It made between 123 and 125hp. With cooler pipes it would make more power, but wouldn't have as much over rev.

@BackRoadGarage

8 жыл бұрын

Cj Brault nice! I wonder what it would run on the 1/4

@pp13bnos

8 жыл бұрын

+LeDerpySquid if you check out bhq in the dyno section, i have a sheet posted.

@deadearth7837

7 жыл бұрын

LeDerpySquid hjh

@xfdfff2620

2 жыл бұрын

@@pp13bnos on gas?

Dang ya got it up to about 30mph be careful don't wanna be fallin off now.

do you weigh 80 lbs lol traction issues.

Do yall not read the description? 125hp at the wheel. Thing has no chance of having any traction on a wet road.

What kind of kit is in the engine?

@pp13bnos

6 жыл бұрын

Stupidlegos it's a 10mm super cub. Built by redline racing in sweet home Oregon.

I believe he is spinning the tires because the bike has so much power

You need to practice shifting&Using your throttle correct with that 2stroke its nice but something isn't right its more than traction issue

@chriswalts1276

3 жыл бұрын

Something like that he needs to loosen his clutch cable it's too tight that's why it's slipping

What a beautiful sound 👍🏻👍🏻👍🏻. But your scared to death of it

Well I think I am going to press that magical subscribe button after watching you ride this beast!

Is that the clutch slipping or the tires spinning?

@edpettit6563

5 жыл бұрын

That has to be the clutch slipping.

Don't be scared....might as well but a yz 80 if your gonna ride like that...its cheaper

All these people wanna say the clutch is slipping. But if you pay attention, you can see the front of the ATV is actually raising up. You sir have a badass quad.

Why she shifting like that ?

Sounds like the clutch slipping

@joellittle4888

6 жыл бұрын

it is

@RaptorWRLD

6 жыл бұрын

sure is

@mattoliver657

6 жыл бұрын

Clutch is toasted

@mikezimmerman5817

6 жыл бұрын

Guys, The road was wet. He even stated it in the description.

@RaptorWRLD

6 жыл бұрын

Mike Zimmerman still slipping, I've had a Banshee slip like that. He just don't wanna get roasted for buying a busted quad. Still nice tho just needs a clutch.

Sand tires on asphalt really?

change the sprocket gearing is to low. power band kicks to soon at low speed. i dont think its the clutch slipping its new. its the gearing.

nice quad love banchees wouldn't be on the road with that front tires and it sounds like your cluch is slipping

i love it

was also waiting for him to go faster. Did he even get out of 4th gear? Redline does amazing work, so it's hard to believe he was slipping the clutch. Sounds like he was trying to speed shift but couldn't figure it out as an inexperienced rider. should always pull the clutch level anyway, just as a safe gaurd. Unless you're daddy Warbucks and can afford to burn up clutches.

Nice quad that powerband duration is insane

Can someone send me the link to the redline racing 521cc..... I can only find the cylinder kit

@pp13bnos

6 жыл бұрын

Call Cam at Redline. Super nice guy, and he'll get you pointed in the right direction.

@TubNastyRacing

6 жыл бұрын

Cj Brault thanks man

lol, those bars make it look like the S. S. Minnow from Gilligan's Island.

You get em tiger

Nice vid man what would you say the top speed is

@pp13bnos

8 жыл бұрын

According to the everything2stroke calculator it should be a little over 100mph with my sand tires. I'm running a 17 tooth front sprocket, and a 42 rear sprocket, with my 22" tires.

@Lisacass2231

8 жыл бұрын

you should do a top speed run video

@pp13bnos

8 жыл бұрын

Lol, I'm good with the top of 5th.

What cc domes are your running? What's the lenght of your swing arm? Subscribed

@pp13bnos

8 жыл бұрын

I'm only running a +6 arm right now lol. it's scary on the sand! domes where cut by cam at redline, other than that i have no idea. thanks for subscribing!

@zstraps

8 жыл бұрын

Are you running a pro mod transmission or the bone stock?

@pp13bnos

8 жыл бұрын

I'm running a pro mod.

@zstraps

8 жыл бұрын

How long do you expect the crank to last?

@pp13bnos

8 жыл бұрын

I honestly have no idea. I was thinking about having the motor "freshened up" every 3 or so riding seasons, just to make sure everything was good to go.

125 hp?? Holy balls!

Nice cub but I don't think those sand tires are gonna corner well on the street!

After 1 down the rest are up.

Sounds crispy to me just power spinning up back wheels. Prefer if someone was following you with the camera

I believe the video description

ive had banshees. its the power band.

monster

Frying that clutch.

i have had many banshees, the latest wasnt that big it was a little over 4, but i know enough so that the one in this video isnt even close to full potential.. either you are blowing the tires off from that thing, or, what i think is you are slipping in the clutch horribly.. not a terribly bad thing.. just need some better discs and plates is all.. something that can handle all that power.. on every one i built, that was my biggest issue.. getting the new power to the ground.. when i actually found a combination that could handle it it was awesome!! but by the looks of this bike it should pull harder that what it is doing.. mine when putting piwer down would almost launch out from under me.. (im a smaller guy) but i still think the clutch is slipping....

Those dune front tires are sketchy looking on the pavement

Dang that rx7 in the background tho

Deviousounds no hate here man.. just trying to help him out.. i have built a few and know how it should sound.. clutch is deff slipping bad.. but thats an easy enough fix.. I want to see the next video where it isnt slipping.. if it is actually what he says it is.. this thing would be friggen awesome!!

Is 521 the cc ?

@pp13bnos

7 жыл бұрын

SupraBdub yes, it's a 521cc.

He has wheel spin in every gear, it isn't the clutch. Clutch slip doesn't make it kick out sideways as seen in the video. At one point he was easily going over 60mph and still spinning the tires and the rear want to come around. This is a sand drag set up with paddle tires. On wet pavement he might as well be on ice.

@MrTeeman15

3 жыл бұрын

Thank you. Ppl don’t know much about bikes I see that now. It’s spinning and it’s sounds like he may need to gear it a little taller.

New clutch I think

bro wot kind of car is that car in your garage it kinda looks like an rx7

@pp13bnos

7 жыл бұрын

cheyennepug yeah, it's a 93. I have a couple videos of it up on my channel. It's crazy to think it's 24yrs old!

@cheyennepug

7 жыл бұрын

doope as fuuucckk bro

It sort of looked like fun...

You need slicks on pavement. Lol that's a badass 4 wheeler. I want to put 421 on a new 450 yz chassis

💯👍👌

Clutch needed ajusting the lock outs are touchy but didn't stop an bother so now it needs new one

How much was your banshhe

@pp13bnos

2 жыл бұрын

I originally paid 2200. After that, I stopped keeping track on purpose lol

Nice

Y is there Sand tires in the front

@pp13bnos

5 жыл бұрын

Because I was to lazy to swap over dirt tires. With that said, since purchasing the banshee, Its never seen dirt. And after this video, has never been ridden on the road either.

Sweet bike man but ya take a look at that clutch sounds a little slippy been riding banshee s since they first came out freaking love em but ya nice fn bike dude

So its a road bike I assume and you don't want to get it dirty? I would just put the motor in a street legal bike like an old TW 200 and ride it on the roads.

Not enough smoke coming from the exhaust, need a better oil/fuel ratio

Sounds like massive loss of traction lol👍😁

Justin sandwig those arent sand tires on the front. They are regular dirt tires. Hes not hurting them at all.

I would say a little under rear tired

The rotating assembly sounds a lil loud at idol or is it the nature of that build?

@pp13bnos

Жыл бұрын

That is the nature of all the 10mm super cubs I've been around. Sounds like something is getting ready to come apart lol.

@chadsmith9218

Жыл бұрын

@@pp13bnos Rite in,I wasn’t sure but had an idea it could be due to it being a new build and having the noise. How do they hold up?

@pp13bnos

Жыл бұрын

@@chadsmith9218 As long as its tuned correctly they hold up great.

@chadsmith9218

Жыл бұрын

@@pp13bnos rite on I appreciate the info man

you can litterally hear the tires spinning if you listen closely at some parts lol