What’s Up Y’all Thanks For Watching Hope You Enjoyed It! Comment what you think about the bikes!

Next video we’ll be Transforming the black bike into a whole nother build.

@hunterholland7883

Жыл бұрын

No need for that wheelie bar not right now but you get some lighter front tires and put the rears on about 3.50psi or 3 and it's gon need that wheelie bar

@hunterholland7883

Жыл бұрын

One things forsure that inframe stock cylinder bike don't wanna see you with a 17t front 38t rear sprockets cause I know that cub can pull that gearing or 18t front

@ScootinSkittle

Жыл бұрын

@@hunterholland7883definitely after we have this race in the sand we’ll change the gearing and make a video

How long the arm is on the stock bike?

What size carbs are on the stock cylinder and what crank is in it

@ScootinSkittle

Жыл бұрын

40mm pwk alks stock crank. Not sure what brand

@dannyduet4395

Жыл бұрын

Older Vito's stock stroke crank with good rods

Bad azz race! That supercub should 472cc. You need to re-gear it, tune the carb and get shorter swing-arm if necessary

@ScootinSkittle

Жыл бұрын

I call it a super but it’s really a little bigger 4mill 73mm bore so a little bigger than a super. Yeah that was are first time testing. This weekend we are going to the sand after that we’ll set it up for the street.

@LPFM28

Жыл бұрын

@@ScootinSkittle You mean chubby cubby 😂 Can’t wait for the race again but against fast raptors 🔥 Goodluck bro

Man with those supercubs I'd leave the swingarm put a 17t or 18t front and 38 rear you got good american racers get some skinny front tires like 3.50×10 Douglas wheels and also put you some drag air filters on it it's worth it not to sling a little pebble right in the carburetor and mess up some expensive cylinders

@ScootinSkittle

Жыл бұрын

Definitely will! It’ll be ready for the street next time we make a video thanks for the comment!

🐆🐆🐆🐆🔥🔥🔥🔥

🐢

@ScootinSkittle

Жыл бұрын

But It’s my turla

Stf up ride it

You both have amazing bikes.. He runs good for stock cylinders.. I had some stock cylinders that out ran 4 and 7 mil all day.Did you port them cubs up for racing?? The boys over here in Albuquerque New Mexico had the fastest bikes for a long time.. good video's 👍..come to Glamis its a good time..

@ScootinSkittle

Жыл бұрын

Thanks for the comment we are looking for some more places to race maybe we can take a trip there. Yes the motor is ported by k&t. It’s a 4 mill 485cc. Once we get it set up we will have another video posted

@goodfellasinc.5648

Жыл бұрын

@@ScootinSkittle NICE WORK K&T ARE BAD TO THE BONE AND DO SOME OF THE BEST WORK OUT THERE I WILL BE GETTING BACK IN MY FRIEND MAYBE I CAN BE FAST AGAIN LOL BE SAVE OUT THERE I'LL BE LOOKING FOR YR NEXTS 📹 VIDEOS..