Redcat Lowriders Full Metal Driveshaft Upgrades for the LRH285 Chassis Sisty-Four and Fifty-Nine
Автокөліктер мен көлік құралдары
Skunks Hobbies
www.skunkshobbies.com/
Skunks Driveshaft
www.skunkshobbies.com/product...
Rose Gold Metal Machined Universal Joint Drive Shaft 60-77mm
www.aliexpress.com/item/10050...
Silver with Red hubs 63-73mm
www.aliexpress.com/item/10050...
Пікірлер: 17
Once again another great Video appreciate your great content and support "Skunks Kustoms-Skunk Hobbies"
Excellent Video. Thank You! I didn't know there were so many metal or aluminium driveshaft options available for the LRH285 Chassis. I'm still at the Flip Chris stage in my Impala Build. Going to take a little more work for that option in an aluminium shaft but the looks will be worth it. Thanks for all your research and content Brother! 👊🏻😎
@NorthSideCustomRC
Жыл бұрын
you moving along nicely, Im a do the Flip Chris Mod on a metal driveshaft in upcoming video
@Carlosinator
Жыл бұрын
@@NorthSideCustomRC Awesome. I'm gonna stock up on Dremel Bits. 👊🏻😎
I recommend pulling the e clips off r1st thing and squeezing them closed a bit and putting them back
@NorthSideCustomRC
Жыл бұрын
eh, Thanks for the good idea, that lil bit of extra security
Awesome videos brutha. I just had a question on what kind of ball ends are the red ones you're using? And what sizes are they? M3 I'm assuming. lol. Thanks for all the help
Hello, What was the length of the drive shaft in the video cause when I click the link for skunk hobbies it ask for a length
Hi, where do I find red anodized rod ends? Thanks
did you upgrade the links?
La neta me encanta este tipo de videos pero no entendí nada de lo que explicaba 😅😢
Is the chassis for '59 and '64 the same?
Thanks for the vid. Just curious, is it worth losing that mod where your driveshaft "disconnects" at full lock in order to hop better?
@NorthSideCustomRC
Жыл бұрын
The driveshaft mod makes hop much better, one of easiest ways to get more hop aside from turning up the voltage to 8.4 I get by without it cuz I accept the hop hurt just as long as I tap bumper I'm good but I'd swap in flip mod driveshaft for any type of comp
@NorthSideCustomRC
Жыл бұрын
Should have Single Pump hop set up using Jevries build plan up soon
Does this significantly reduce the noise at full lift that the original shaft would make when accelerating?
@NorthSideCustomRC
Жыл бұрын
Yes it helps but Honbywing 1080 really helps with added low speed control