#1 If one engine fails on the water don't operate the 2nd engine over 5 mph, otherwise you will fill the failed engine with water. #2 Invest in Lateral Thrusters and Thrust Vectors. #3 Install the EZ-Locks manhole cover blowout prevention kit. On the older Yamaha boats the cleanout plug (Manhole Covers) would blowout when they weren't properly maintained, thus sinking the boat.

@joejo9808

3 жыл бұрын

U A b,oat guy

@C.CUMM1NGS

3 жыл бұрын

#4 Reinforce the hull with Ice Runners from bow to stern, the norm is 2 but i would put 5 or 6.

@im_your_huckleberry8474

3 жыл бұрын

#5 Mount 240 Machine Gun

@j.a.r.family2576

3 жыл бұрын

You whoop ass in UFC and build jet boats?

@dren2jdh544

3 жыл бұрын

The old one, should they spec out a better engine for it? Do some upgrades?

Can't wait for pops to pull out the camera and start vlogging his trips to get the builds! GIVE THAT MAN A RAISE!!!

@mikebrowne477

3 жыл бұрын

I miss the travel parts of the new builds. Always a good time.

@thomasmagda4580

3 жыл бұрын

@Why So Serious? Haven't you noticed how nice the house is getting. It look completely renovated...

@garlanminton7084

3 жыл бұрын

@@thomasmagda4580 also I'm sure there house is paid for and they probably don't have to worry about the bills either.

@cjmarcel2971

3 жыл бұрын

@Why So Serious? they already said there whole goal was to give their parents a retirement everything is paid for

@shawnm.1540

3 жыл бұрын

I'd love to see Pops vlog picking up vehicles and his perspective on all the builds etc.

I work for Yamaha in the boat division and I actually found your channel with the last boat build and have been hooked ever since. You guys have a great boat on your hands. Fiberglass repair is going to be a journey but you guys can do anything. Pretty excited about this one. Let know if you have any questions.

I recommend getting a cover for it right away so the inside doesn’t end up like the Maria

@theonlyone8630

3 жыл бұрын

Cinnamon toast ken fan. Digging the profile pic 😻😻😻

When yall are working under the boat being lifted by Big Bertha, make sure you put some safety supports under it just in case a hydraulic line breaks and/or the boat decides to come racing to the ground. As a former elevator mechanic, we always made sure the elevator cabs were blocked before we started working under them.

boats always need to be covered when not used. the weather will ruin a boat fast. be well

@KJSvitko

3 жыл бұрын

It is a shame to put the work into something and then let it go down hill. Should have been covered and put up for sale or give it away if you did not want to finish or repair it. Someone would have been glad to get it before it gets too schetchy. Help out someone less fortunate.

@rome79735

3 жыл бұрын

Thank you Stephen, I just bought a used nice boat. It just has one engine, but it will do for me. Thank you for the tip.

@allspooledup2584

3 жыл бұрын

Clearly lol

@bennjyysucaucasianshepherd6406

3 жыл бұрын

I want it lol

@williamtitus6640

3 жыл бұрын

@@KJSvitko it’s not your money so why you worried about what they do

As a friend would say, “Get a cover, you wouldn’t leave a convertible out with the top down.”

@wcads623

3 жыл бұрын

Totally agree. Flying Wheels had the same issue with his boat and then wonders why it is trashed.

Some satisfying detailing content in there 👀 okay we see you guys!

@NoFlawsBunny

3 жыл бұрын

Ong😂😍😍😍

@marquisethomas5611

3 жыл бұрын

They used to have a small detailing business

@james94582

3 жыл бұрын

Seems like could be a nice collab!!!

Buy an OEM boat cover from Yamaha and use it every time. It only takes a few minutes to snap in place when not using the boat and it keeps your interior clean and protected from the sun.

@towboatjeff

3 жыл бұрын

Theyll make 3 or 4 videos with this boat then itll rot in the backyard.

@Cous1nJack

3 жыл бұрын

Get one that’s almost oem 😝

@smassey22180

3 жыл бұрын

+1 on the OEM cover. It is the best boat cover I have ever used. And put some big Damprid tubs under the cover to keep your seats free from mildew.

@Theman81892

3 жыл бұрын

@@towboatjeff same with the 370z

@xtune5731

3 жыл бұрын

Poppy Covers are also the second best option imo

You should start the motors then turn the water on and then stop the water before turning off the engine otherwise you risk hydro locking the engines. This is the same as Yamaha waverunner Jetski

@rodrigomazzola

3 жыл бұрын

exactly

@exiquter78412

3 жыл бұрын

Do not discount this advice. It may save you trashing the motors. This is common knowledge.

@chadhickey9942

3 жыл бұрын

@@bkgshop jetboatpilot sells rebuild kits for the port plugs for cheap. always remove the plugs when not in the water so they dont sieze up.

The old goonzquad headquarters is starting to look like a hoarders paradise.

@sohumarelli3959

3 жыл бұрын

fr, i was just talking w some friends, we watch their content so we know what the roads are like, my advise to them would be sell all the hypercars and supecars like the lambo, ferraris viper and even the mustang, they might as well sell the trackhawk and s2000 too.

@wcads623

3 жыл бұрын

Yep the boys are sitting on a load depreciating assets. Get rid of some and stop loosing cash.

@shmiggz

3 жыл бұрын

They probably failed or never went through a salvage inspection...can't do much with them in that case other than sell for parts.

@sohumarelli3959

3 жыл бұрын

@@wcads623 exactly depreciating every day

@scruffyRe

3 жыл бұрын

@@sohumarelli3959 no at least keep some exotics and s2000 they go up in price

Awesome man!!! Grew up with a 2004 sx230 dudes, the exact same blue color! You guys *HAVE* to check into buying these things called "Cobra Fins" I'm not sure if they still make them, but they're custom made, almost rutter style steel, but they clip under each of the jets coming out the back. It really REALLY helps while under no wake zones or slow water operation. I remember my mom couldn't drive the boat in the marina until we installed them LOL we would just spin spin spin in circles. Another quick mention if you happen to see this; almost lost my life because of it around age 16, when you suck some grass/material up into the impellers, obviously you'' pull the plugs and clean it out. *ALWAYS* give those things a little good pull before get going again and ensure they're re-installed properly. We operated on the Mississippi and sucked up some weeds; we cleaned out the plugs while on the river so it wasn't the quickest clean up and mom/dad didn't give it a pull check. Going about 45 with both engine maxed out and the left plug blew; about a 6-9 foot geyser flew up and luckily the engine killed due to the safety features, but we flew off to the right of the river with no power, filling full of water. Issue was we were RIGHT next to a big barge pushing a full load up the river, needless to say we came within 10-15 foot of that barge, thought we were gonna be sucked under the water for sure until a pontoon rolled up and threw us a rope. Ended up going back home on one engine, but glad we made it! edit: just google "cobrajetsteering" and you'll find em! looks for 400 bucks for the kit. Looking forward to the nostalgia that will come from this build. Also 8:50 - you put one forward, one back at full speed, you'll rip a WICKED 360. if you're going full power and throw both into full reverse, the bow will go under the water and flood the front/ladies, so epic.

I'm starting to get hoovies garage vibes with all the projects going on

@siddiquebirds7495

3 жыл бұрын

It’s just so annoying

@bang2020

3 жыл бұрын

Hoovies garage is great! I enjoy all his projects.

@b.roa2366

3 жыл бұрын

@Ryan Stocker they also have the helicopter. Lol

@matsnijhuis3311

3 жыл бұрын

@Ryan Stocker Audi

@NinjaKhaos74

3 жыл бұрын

@Ryan Stocker stop adding the fucking burnt hurrican, it's never getting rebuilt

Been a jet boat mechanic for a couple years now, your in for a huge learning experience and curve can’t wait to see what you do with it!

"The more you scrub it, the cleaner it is" -Billy 2021

@meso06

3 жыл бұрын

They just discovered that. Lmao!

I enjoy your enthusiasm. It's catching. Since I am profoundly deaf, thanks for quickly getting captions on your shows.

“This is Our only boat right now” Are you boys forgetting about the boat you stuck on top of the storage container at the new HQ (the house)

@conmancollins1176

3 жыл бұрын

yeah its actually at that house i think

@marquisethomas5611

3 жыл бұрын

They forgot they had a lamborghini

@zara3612

3 жыл бұрын

Same that is what came to my head first

That hull is double walled so you wont be able to see any damage from looking in the ski locker! The cleanout plugs you need to twist and then pull up, when you get them out, lube them up with silicone bc they like to stick. Always start the engine first, then the garden house and shut the water off and then the engine!

I love work, I could sit and watch it all day! And you two are a real inspiration! Thanks for the energy and the fun! 😎👍

If you’re gonna lift the boat up and work on it, build some wooden “jack stands” to support it. Don’t rely on the hydraulics to hold it up. That’s a great way to get killed.

I have the same exact boat so if you have any engine questions I gotcha! I've had to do a bunch of engine work. Also make sure you resoundproof the engine compartment and wakeboard tower no question get the forward facing reborn launch.

@StefanShift

3 жыл бұрын

This will be helpfull!

@bryanruiz6552

3 жыл бұрын

You gents should swap that fake LS3 into that Mariah. Bet that thing will smash on that water. Y’al ain’t down...

@jessemiranda5484

3 жыл бұрын

@goonzquad

Why do our leave things for ages to get in the condition of that older boat. I always say if you don't use it regularly then sell it.

Guys...I LOVE the Boat Builds. I loved the last one too. Houses, then boats, then cars. That's my ranking system. And by this, I mean I love all of your content. But the boat and home repair stuff....that's 100% quality entertainment :)

Old boat in the new pond 🏄🏽

The two best days of a boat owner: the day you buy it and the day you sell it.

@geoaerorider4589

3 жыл бұрын

Another something to add to the junk yard.

@geoaerorider4589

3 жыл бұрын

@Ryan Stocker precisely, same thing.

@pipolebnene

3 жыл бұрын

Yeah for real i just spent 7k on mine this month split between yearly berth and repair costs haha and before you think its a yacht no its an older small one like they got

@moilaset11

3 жыл бұрын

100% true; I was a happy chap when I sold my 290 Searay Sundancer

@gd1996

3 жыл бұрын

Can't say that was true for me... had one that needed nothing for years, just regular maintenance. Best days were out on the water having fun.

Damn man that 370z in the back rotting out. hurts my soul😞😢

@numberone7674

3 жыл бұрын

they need to sell it

@OnlyyJaviii

3 жыл бұрын

They have cars that up in value just back there and trust me it hurts me too😢 They have money for ALL these builds but don’t have money to built a concrete slap for the cars can sit on

@adamfpv8294

3 жыл бұрын

@@OnlyyJaviii why don’t you do something about it?

@leosadowsky3018

3 жыл бұрын

@@OnlyyJaviii wym there building 2 garages rn your slow

@MyFLASHYLyfe732

3 жыл бұрын

I'm so pisst off too! They should put it for sale I'll cop it

Been fixing a boat myself and having issues cleaning it, but ya'll gave me the exact info I needed! Thank you and keep up the great work!

Did anybody else get excited when they saw they haven’t sold the Z yet

@Theman81892

3 жыл бұрын

Shame it’s been abandoned like most the other builds

That fibreglass work will need to be done very thoroughly You will have a lot of delamination hidden just below the surface of the damage, you will have to cut it all out, sand back to glass in all repair areas, plate and fill, do it right the first time 👌🤙

@benmac940

3 жыл бұрын

Not likely with these 2 unfortunately

@rbjones1996

3 жыл бұрын

Zero chance they do a legit repair job

@benmac940

3 жыл бұрын

@Why So Serious? haha I agree on the helicopter, but he'll it ain't difficult to repair fiberglass, there's nothing precision about it, these two just seem to look for shortcuts to get things running faster.

@timglass6041

3 жыл бұрын

@@benmac940 Yeah, and when they use those "shortcuts" rebuilding that Helicopter, it's likely they will kill themselves.

After all the work cleaning the boat, invest in a good fitted cover.

@S_GARR

3 жыл бұрын

You mean like they do for their cars, lol? YEAH RIGHT!!!

You’re going to have to fix that damage from the inside. You can’t just throw a patch on from underneath.

@mattreb5748

3 жыл бұрын

Yep going to have to rip up that floor and replace some stringers and rotted wood. Major pia, most likely why that boat was totaled

@ls4.8frank

3 жыл бұрын

Patching shit is what it about these days didn't y'all know that? Lol. They need to fix it correctly instead of this rush crap work.

Your parents will be glad to see the new shop built lol. Sooooo much stuff at the house! Love to Mum & Dad :)

Goonzquad "Buy it Wash it Fix it then let it rot on the woods Repeat" LOL

@Cous1nJack

3 жыл бұрын

Not bad effort for $20000 a week

@juliopenaranda

3 жыл бұрын

@Akshat Shah waiting on parts, wit covid19 taking for ever

@Hobodeluxe960

3 жыл бұрын

@@juliopenaranda not parts so much as it has to be done with a certified helicopter mechanic. they had a deal worked out with the guy and then covid hit and threw a wrench into everyone's plans.

@tristantullett204

3 жыл бұрын

Don't forget the Toyota supra

@Hobodeluxe960

3 жыл бұрын

@@tristantullett204 yeah they've got a good start for a used car dealership.

Guys...Use 3M High Strength Repair Filler for the hull and Evercoat 100668 gelcoat repair kit for the finish after the filler repair. Also if you can get to the spot on the inside layer use reinforced cloth and resin.

Remember when they used to finish a build before starting another one? Those were the days...

@TNAWWE

3 жыл бұрын

@@gplugt7960 Supra, Audi, both Tesla's, Camaro, uhh am i forgetting anything else? still love the boys though. i like the switching around

@thebuildingcity3303

3 жыл бұрын

Tbh if it was another KZreadr I’d be scared. But these guys fix like 50 cars a year. Not many others touching them, why I quit watching vtunes

@Mark1594q

3 жыл бұрын

They needed another build because of parts availability.

@waynesbutler7834

3 жыл бұрын

@@TNAWWE I was wondering if they plan on repainting the rear bumper cover of the Ferrari although looks better as is , they do have parts for the helicopter , i was hoping for the Teslas to finish being they said they have parts to install 2 front ends . I think thats it , you covered most builds still pending

@michaelinfranco5484

3 жыл бұрын

Jumped the shark?

I’m in love with the styling of this boat! Absolutely beautiful build!

Still wondering when they gonna bring the Z back out from the woods

@lab-matrix

3 жыл бұрын

fresh paint job, then leave under tree for couple years, its hard seeing the z like that. ;(

@craigbrown5667

3 жыл бұрын

Yeah I was like... ZEEEEEEE!!!!!! Show some love to the 370 guys :)

@averyslife6314

3 жыл бұрын

Do they even still have it? Haven’t seen that thing in forever

@dylanowen204

3 жыл бұрын

@@averyslife6314 yup haha it was there

@dylanowen204

3 жыл бұрын

@@averyslife6314 it was next to the other charger

Something you guys may or may not know. Any hull damage has to be fixed from the inside down. Can’t fix from outside of hull in on anything under the water line. Otherwise it will fall out over time. If you want it done correctly then you gotta pull the top cap off and fix the bottom of that hull.

@squid_fish

3 жыл бұрын

They’re hoping for a “few summers”; we’ll see what they end up doing

@joehouston4732

3 жыл бұрын

They need to find a new hull

@JG-nx3jg

3 жыл бұрын

@@joehouston4732 hull of a job

@yarkie1

3 жыл бұрын

I was a fiberglass repair man at a marine shop for 18 years. You can absolutely fix that from the bottom. Grind out any damage. Taper your grind wide and layer it up. Alternate with a roving after 2 or 3 matt. Ideally, if you can get at the inside id back up the repair with some layers as well. Grind off your repair, body work it, spray gel, wet sand up to a higher grit and polish it out.

@kenhorne5650

3 жыл бұрын

My thought exactly. Top down. Maybe why so many scrapped.

These guys got so much energy. Most KZreadrs are burned out just filming vlogs these guys name vids and work hard constantly shout out goons squad

That Maria is what brought me to watching your channel every other day!!

Now this channel has gone from rebuilding car to rebuilding everything lol

How many projects do u want to start at the same time? goonzquad: yes

@blazingyodler

3 жыл бұрын

they might be waiting for parts for both the teslas and same for the Camaro. so you would need at least something for content right? plus it doesn't matter because they finish the builds anyway

@philipp_jnk

3 жыл бұрын

@@blazingyodler it’s just a joke dude but u right

@paulius2153

3 жыл бұрын

@@blazingyodler what about audi, hellcat body kit, helicopter

@zara3612

3 жыл бұрын

Where is the helicopter they haven't made a video on a year bros

What an awesome video, and a nice little side project. You guys have an infectious level of enthusiasm and work ethic. Long may you continue.

You got to love how Thomas the technician inspects everything that comes into his shop!

It’s kinda sad seeing the old projects and builds rotting in the background

@leosadowsky3018

3 жыл бұрын

thats why there building the garge

@ArizonaHotSauce

3 жыл бұрын

@@leosadowsky3018 *they're

@jayxj7785

3 жыл бұрын

@@leosadowsky3018 the garage won't be built tomorrow you know. Like it or not, some builds better go to other hands than sit here and get taken up mother nature. Manufacturers are having a hard time building vehicles because of the chip shortage and other stuff, this is the time to sell!

@leosadowsky3018

3 жыл бұрын

@@jayxj7785 no time to sell and they can put that shop up in 2 weeks and plus what the fuck does a car shortage have to do with this there cars there money they can do what they want and plus your prolly fucking jealous that you drive a shit box and work at pep boys

@jayxj7785

3 жыл бұрын

@@leosadowsky3018 damn you write and sound like a 9yo.

It's great that you guys have all these projects but you guys are all over the place! One thing I look forward to is watching progress of a project from week to week until it's done. I'm still waiting on the A7 build. For now, I'm just going to wait until you guys finish a project and binge watch them then. GL fellas!

@chrome255

3 жыл бұрын

Parts on backorder, is probably delaying a bunch of projects

@thekanuck2778

3 жыл бұрын

@@chrome255 Yeah, it's a pain ordering parts right now between shipping delays and such.

@waynesbutler7834

3 жыл бұрын

How about the two Teslas , parts are in according to them . Are they painting the rear bumper cover on the Ferrari ? , parts are in for the helicopter . Yes some stuff backordered but what about all these boxes that keep piling up in the garage . Love these guys and their content but like has already been mentioned they have lost focus ..

@ImNotMC

3 жыл бұрын

@@chrome255 Yeah, I hear them say that in many of their vids but they also mentioned how they have replacement and aftermarket parts for their other cars as well. I actually enjoy when the slap parts onto their previous builds. They've even talked about doing more to the Mustang.

This channel is turning in to a talkshow. I like looking at ur older videos.

@terrygirard3744

3 жыл бұрын

All they do now is make vidoes about nothing! Used to enjoy seeing them do some work and learn. Now 90% talking.

@willjacobs4101

3 жыл бұрын

They've always done walkthroughs of their new builds before they start.

@dannicortez1130

3 жыл бұрын

You guys are tripping have always been the same before a built 👍😎

@MyFLASHYLyfe732

3 жыл бұрын

Me too..I agree

@DinKnight

3 жыл бұрын

Agreed. They are getting boring now.

There is something satisfying about watching you guys clean stuff

I can hear that first boat saying "Please just pull the plug".

I do not understand why they wouldn't put a cover over the older boat after they had re-upholstered and painted it... c'mon boys do better!

@markkneale

3 жыл бұрын

For sure. I didnt even realise the boat was fucked ! I was wondering what had happened , I thought they were still waiting on upholstery!

@philipmurray9796

3 жыл бұрын

Creating new content is more lucrative than fixing old projects that they're not interested in.

@ZachSmith-gm4sq

3 жыл бұрын

Must have too much money to not take care of everything..... or care about it.... we all see how they treat all their other builds.. they just sit in the woods. If it isn't the viper/hellcat and or the lambo or Ferrari it's neglected for sure. They should sell them to someone who will appreciate them. There again, they don't really need the money. Love these guys but I cringe when I see how poorly everything is maintained.... and again, I understand it just hurts to see

@MegaLooling

3 жыл бұрын

I know why. Either they didn’t have one (which I doubt), or the main reason is because when u cover it, the cat jumps in the middle of it and causes like a crater in the middle. And when it rains, the water stays in the middle and makes it even worse and causes mold. I saw the same thing with another youtuber.

@MrKrazeoner

3 жыл бұрын

Give it some time fellas there building that big shop so they Will be able to house all those vehicles. I’m sure they would have done it sooner but the pandemic kept them from building shop sooner!

Seats look super fresh now. Great work! Hope you guys can all enjoy that boat for years to come!! It'll be a BLAST on the water!

When running Yamaha Engines off hose the # 1 rule is "engine on than water on...water off than engine off" or you risk flooding engine with water guys. I have a Yamaha boat and you will love it. Going to enjoy this quick build. Also your clean out plugs might be stuck so you might want to spray some silicone lub down there to loosen them up. Jetboatpilot.com has rebuild kits for them if the seals are gone. They also sell the Seadek flooring in kits made for your boat. Check out the Boat Bling line of cleaning products especially made for boats. enough for now.

You guys need to get rid of the old boat and clear some other builds that you don't use enough. Pops probably wants his garden back!

@allspooledup2584

3 жыл бұрын

Don’t think they drive any of the cars. Just the trucks

@caseybhargraves3696

3 жыл бұрын

They don’t NEED to do anything. THEY can do whatever THEY want to. It’s THEIR channel. It’s THEIR gig. I’m pretty sure YOU can start your own channel and do things YOUR way tho.

@Robin-01

3 жыл бұрын

@@caseybhargraves3696 well said!👍

@awkwardantagonist3319

3 жыл бұрын

@@caseybhargraves3696 jeez man chill

@eo4527

3 жыл бұрын

@@caseybhargraves3696 bro calm down

Be sure you start the engines before turning on the water. And then turn off the water just before shutting down the engines. Otherwise you run the risk of getting water in the block. Same with Waverunners.

@chrisw9095

3 жыл бұрын

Yes you will hydrolock the engine(s) if you run water before running the engine(s). It's also very difficult to control with 1 motor, recommended for emergency only.

Cleaning those bench seats felt very satisfying!

I used to hate these guys but I have grown to live their videos. They win the award for the most hand movements when they talk though lol.. it’s funny as hell after someone points it out you can’t stop noticing it 🤣😂!! Keep up the hard work and good content guys.

Are you guys hanging out with the wrench everyday crew? New projects on top of new projects lol

@mobigsly9595

3 жыл бұрын

It's the wrench every couple months for 10 minutes crew

THis boat was my uncle Steve's boat !! He was fishing and ran it into shallow area that had tree stumps underneath !! There has been alot of Bikini girls in that boat DUDE MAN !!

@zenjamin6262

3 жыл бұрын

@@ingresswizard9044 uncle Tom's Cumarrow and this boat is my uncle Steve's!!! Big family !!! Cant wait to see what they get next !

@jamescrossman4642

3 жыл бұрын

Wait fr? That’s so cool

Just when I’m like 🙄…a boat again. I’m hooked. Lol…can’t wait to watch the next vid.

Absolutely love the boat content especially with it being summer. I hope you guys turn this into a longer series

They literally rebuilding one of everything

@TheRandompaint

3 жыл бұрын

This is their third boat 😅

@brianharris8441

3 жыл бұрын

It’s not their first boat😂😁

@brysonpucci1844

3 жыл бұрын

They have done 3 boats like every summer they do a new one 😂

@r4sdup183

3 жыл бұрын

This may kill their channel

@TheRandompaint

3 жыл бұрын

@@r4sdup183 I doubt it

You guys have one of the greatest upload schedules on this platform. The quality of your vids makes your channel so amazing. Keep up the great work boys :) from the UK

@SWEET-2381

3 жыл бұрын

Its with a iPhone

@emrangasi8742

3 жыл бұрын

And a pretty steady arm 😂😂

Well hopefully y’all invest in a cover this time

Love this channel naw lie the best, builts after builts you never get boring.

A couple of things to remember while cleaning boat upholstery is to make sure that when you use bleach products you rinse extremely well because the Sun is also going to naturally bleach and pop a lot of stitching if it becomes dry.

that 370 sitting in the back rotting, kills me.

@thomasgodard6222

3 жыл бұрын

They should do a giveaway

@RedDragon-zn3jj

3 жыл бұрын

They’re working on the new garage where they can store cars. They don’t have any space right now

@geoaerorider4589

3 жыл бұрын

@@RedDragon-zn3jj their new building is not big at all

@briandale5645

3 жыл бұрын

All of the cars are rotting.You would think with all the money they waste car covers would be on every car and should be !

@mariahpyrtle8759

3 жыл бұрын

Yeah they buy all these cars don’t know what to do with them then buy more wrecked cars just make videos on and then let’s them sit u can tell money is getting to them buys dum stuff

Dudddddeeesss Yess!!! Im currently rebuilding a 1997 Seadoo Challenger 1800!! In the process of rebuilding the 2 stroke rotax engines from the ground up along with rebuilding the jet pumps and the autobilge system. I pressed out the original cylinder sleeves by heating up the aluminum head and then just using a 20 ton shop press. They popped right out even tho every forum state that its not possible so 🤷🏻‍♂️. Good luck on the build this will definitely be a money pit i can personally tell you that!!!

Dude The Red 350z Broke my heart

"We are Goonzquad................and we have a car hoarder problem".

At this point, I'm expecting a wrecked SpaceX rocket at any time.

@Mahesh-pf9nr

3 жыл бұрын

lmaoo

@brysonpucci1844

3 жыл бұрын

Lmaoo that would be sick!

@uk_andy

3 жыл бұрын

HA HA

Great suggestions from others....just a couple to add. Replace both fuel pumps at the same time you clean the tanks out. Put in two batteries and a selector switch in. If you run one down jammin' in the bay then you can still start. The batteries can both charge even when disconnected but you need an isolator. Don't ask why I recommend this. (new fuel pumps are to ensure equal performance and to avoid lean situations) If not already equipped, I also recommend a water separating fuel filter (dual of course). I ran a 18' jet outboard for years and that fuel filter was a cure for a reoccurring problem. Good luck and Bounce Out Another Thousand safely ....yup

@sharonbraselton4302

2 жыл бұрын

how outbard jet cjef knbard jety

Papa's is an absolute Legend

Start the motors first then start the cooling water hose, then cut the hose, then the motors. Those Yamaha's you can damage if you run the water before starting the engines

@travispowers9175

3 жыл бұрын

This!

@cap2c484

3 жыл бұрын

Yep, I am surprised they haven't hydrolocked one of them already!

Remember with jeboats, steering is dependant on power. When you pull the power, you instantly lose steering and go straight ahead at whatever speed you had attained before pulling power. Power on to steer, reverse to slow, gently. Also, Impellors are dependant on water for lubrication. Start out of water and spin a bearing in no time.Good luck!

@racerx2084

3 жыл бұрын

Screw the $500 boat. Did you see the video of the mustang with moss growing on it? At least invest on a $50 wallyworld cover.

The way you guys nerd out when exploring new builds is super legit, duuuuude.

@joetay4237

3 жыл бұрын

Need out lol! all they do is repeat what the other one said

New merch idea...boat covers and car covers. Super fire!

It's official...you guys have too many projects going at one time.

@michaelyackovich155

3 жыл бұрын

Just like Tavarish

@koolaid53

3 жыл бұрын

@@michaelyackovich155 aww, I disagree. These guys will actually finish a few of their projects, poor ol Freddie never will.

Can y’all please stick to one build 😂😂

@leosadowsky3018

3 жыл бұрын

there waiting on parts.

I love y’all videos!! Keep up the great work! 🏔🚤

Dang Son you Guys are not afraid of anything! I do like your enthusiasm! I am looking forward to the next video no matter which build it may be!

need to invest in some covers for the boat. leaving them out in the weather like that they will not last long.

i'm now convinced they have lost their marbles !! they can't resist a bargain !! good luck with the next one. poor old pops !!

@philipmasie

3 жыл бұрын

I think they’re trying to recover from that rat Camaro buy. I would suggest just giving that scam Camaro to some viewer that was skilled in the way of that era.

@novgaladh

3 жыл бұрын

@@philipmasie yeah coz they dont really rebuild more like replace parts.

These young men can work!! 💪 awesome job guys!

Amazing clean up. WOW. Very impressive.

Good job keep going

This whole channel has turned into “watch us wash stuff while we run 30 ads”.

@lukebarnes8097

3 жыл бұрын

"and also spend 10 minutes talking about random stuff without actually saying anything of interest"

@calitri-boost

3 жыл бұрын

Don’t watch

@pete_mitchell

3 жыл бұрын

Exactly, lots of dude man awesome handwaving and really much done. They used to Be good.

@anthonyd6903

3 жыл бұрын

Watch us talk for 30 minutes and get nothing done

@calitri-boost

3 жыл бұрын

Yet you watched. Lmao

Add Ceramic coating to keep your boat clean and looking great shape !

Man you guys have really great tension to detail and it’s amazing what you two brothers can get done together

I swear they’ll run out of space before they can begin building their shop

It's pretty sad to leave all those other projects in that state, don't you have anywhere else to store them other than leaving them to seize, that poor Z though.

@z33Santi

3 жыл бұрын

I was so excited for the Z when they started but they left it. It hurts my soul to see it back there.

@guy_in_ashopping_cart-sfs967

3 жыл бұрын

Yeah honestly even if they have nowhere to store them, it would still be better to sell there old builds then they could reinvest in newer builds

@z33Santi

3 жыл бұрын

@@guy_in_ashopping_cart-sfs967 or reinvest and make there current builds better.

@edewaal97

3 жыл бұрын

I hope the shop or the garage at the new HQ gets build quickly so they have some place to store their builds away from the elements.

@Flentric

3 жыл бұрын

There's definitely going to be a mice or rodent infestation in one of those cars

Loving it guys three builds at once, something for everyone 👍

You guys “ALWAYS” rock it!

As an ex boat owner i can relate." The two best days of a boat owners life, the day you buy your boat and the day you sell it". I now own a paddle board and it doesn't piss me off like my boat used to .LOL. Enjoy your youth guys .

Just when you think you have them figured out, they hit you with another surprise 😮. Love these dudes, just can't figure why they don't put car covers or Tarps on their builds sitting back there. Sucks seeing all that hard work go for not.

@markkneale

3 жыл бұрын

Coz they just give them a nice clean dude .

@craigbrown5667

3 жыл бұрын

@@markkneale I think you mean DUUUUUUUUUUUDE lol

@67mlb67

3 жыл бұрын

The commercial shop will have indoor storage for all their cars.

@philipmasie

3 жыл бұрын

They could actually pay some neighborhood kid to clean a couple cars every week. Wouldn’t hurt to give a little back to the community.

@spiritrider3348

3 жыл бұрын

Cars on bare ground rot from the inside out, moisture rises out of soil and condenses under hood etc. Rust before you know it! Park em on sheets of plastic or somethin!!

Your guys work ethic is amazing!

As with everything y’all do, the boat looks great. Can’t wait to see the finished product.

When you you get boat fever it never ends until your broke

do you guys ever focus on one build and complete it before jumping onto a new build?

@ArizonaHotSauce

3 жыл бұрын

They are held up because of parts delivery. To keep up with their regular scheduled video uploads they have to start a new project.

@leosadowsky3018

3 жыл бұрын

yea they do all the time but they can do what ever they want are you jelly.

@michaelyackovich155

3 жыл бұрын

They used to, not anymore

@thomasmagda4580

3 жыл бұрын

Did you ever watch the channel before? Did you ever build anything?

@philipmasie

3 жыл бұрын

@@thomasmagda4580 - I’m too busy watching KZread to build anything, LOL. That’s all I did was build stuff when I was their age but unfortunately there was no KZread back then.

so many projects at once, holy crap! good luck you guys!

You guys are freakin killing it with the camero and the boat! LOVE IT!!!