Was a great time fixing my broken junk haha

@MakeItKustom

11 ай бұрын

I had the best time man!!!

@patcordingley2751

11 ай бұрын

It just shows brent, with what happened to your shop there is still some decent people out there

@Isadore123L

11 ай бұрын

I watched when Brent dropped his vid first cuz he was at home to edit already. Love watching you guys together, two innovators taking a hammer that was innovative to start and bringing it back to better than it was. Karl's experience with teaching the hammers in LV, the hand-built Rolls fender in AU and the MakeItKustom hammer from shop scantlings really brought out the potential in Brent's farmer forging hammer, BamBam2. Some touch-up on the dies and the hammer works awesome. I'm sure Brent will love the way the 24-inch, JapHands Kustom planishing hammer takes over after the hammer and brings the finish to next level stuff.

@psiked

11 ай бұрын

Super fun seeing you two work again. I started following @halfasskustoms after coe, and all through the fire - sorry Brent - great seeing you two make art from scrap

Thank you Karl for helping Brent. He is a good hard working man and deserves all the love. You my friend are on another level and your talents showed on this visit with Brent. Thank you again

You fellows make a great team. Brent is so blessed to have so many friends who are willing to help out. Pablo didn't look to happy to have to share his ride.

You are the man Karl. Helping out a friend when they need it most shows what an awesome person you are. The improvements to the power hammer will benefit Brent for years to come. Thanks for everything that you’ve done to help out Brent & Esther as the rebuild from the fire.

@MakeItKustom

11 ай бұрын

It was always the plan to come out and visit the circumstances changed with the fire

This power hammer is a work of art. ''You guys are having too much fun, different styles getting stuff done.'' How about that, I wrote a poem."

I am sitting here in Perth, Western Australia watching this and Brent's video and appreciate what we in Australia call "mates helping mates." I really appreciate that you took the time and helped out a fellow rod builder and shaper, get back on his feet and working, following that tragic fire in his shed. It is something that is the backbone of Australians when they come to the aid of someone whom has or is, having a really bad time. That you were able to quickly grasp the fundamentals of Brent's home built, yet effective tooling and improve the die alignment and appreciate the effectiveness of a diff driven hammer, added again to my opinion of "men of metal". You proved beyond any doubt, that you don't need a zillion dollar piece of equipment to do good work and have fun doing just that. Onya cobber(s)

@rh752

11 ай бұрын

Well said mate!

@wallbawden5511

11 ай бұрын

yes from a fellow Australian well said mate one in all in

@MakeItKustom

11 ай бұрын

Thanks a lot mate! Ya just a great opportunity to hang out and get some shit fixed up! Really good people Brent and Ester. I’m so glad for all the support they are getting during this time

I watch all of you guys separately, and it's SO great to watch you all together. Please do more! Thanks

It can't be locked up if it is liquid.. what a cool episode. So excited to see Halfass get back going and you coming to help is such a hero thing to do. Love your stuff and have learned a bunch from your videos. Thank you

Really kind of you to head out and lend your support and expertise to help 2 of the nicest people in the KZread car community...Brent and Esther are great,and you are as well,my man😎👍

Karl I admire very much you for be a good friend to Brend and Esther you are a true friend, greetings from sunny Puerto Rico!

Karl.. Puck board.. Is..HDPE.. High density polyethylene or PEHD.. Polyethylene high-density.. Also used in plastic bottles.. Plastic lumber. Has a high heat tolerance 120C ..248F for short periods. Doesn't take to glue very well.. Best if plastic welded for joints.👍

Many kudos to you for helping Brent and Ester. Enjoy watching both of your channels. Laughing together makes things more better.....and you guys laugh alot.

Yes thank you for making the trip to help out Brent with rebuilding his tools,Karl you are mint and golden kinda guy,keep up the good works and I'll catch ya on the next one.

Two hot rodders working together turn junk into tools. Well done, thanks for helping Brent.

Knocked it out of the park you guys. My favorite Hot Rod "Engineers" all in one place doing the best work ever. Love you guys. Billy J... Queensland, Australia.

@MakeItKustom

11 ай бұрын

Thanks Billy!!! Had a blast 💥

it is neat to see you bret working away fixing some of his equipment the knowledge both of you share with everyone great people help friends in need

Awesome watching from 2 perspectives! Driving videos are always awesome! Getting the power hammer dialed will be a game changer for sure!

@MakeItKustom

11 ай бұрын

Man it was awesome to meet you, Frank!

So very cool of you to help out a friend in need. You can tell who your friends are when they step up to the plate like you did. KUDOS to you.

Karl, thanks for helping out Brent. I had a friend like this for 30 years. True friends are hard to find. I'm seeing folks in Australia on here saying, " mates helping mates". I'm sure Brent is grateful you helped him out!!

Good friends helping friends great to see!

It was awesome that you were able to come help Brent and to do a quick metal shaping class with some of the guys around him. Shure wish I was able to come check it out in person

I think it’s good You help a friend in need I have been burned out before it’s hard to start over

Karl so glad you went over there and helped Brent. Your a fine young man. Totally respect you more. Getting Bam Bam 2.0 back on line. And thanks for the help on the old 35 Dodge going again! 💯👍👊

Thank you for capturing Pablo barking @29:40

Thanks for Sharing the Karl and Brent show with so much humor. Was a great video and Karl thanks again for your time spent helping out Brent and Ester. Take care bro.

Dude it's awesome to see you guys collaborate again but man having to rebuild like this is heart breaking.

Yet again mr fisher showing what he’s about . Going above and beyond for Brent who also is the salt of the earth . Reassurance the world has good people . Loving the hammer rebuild too making something good outa nothing .👏🏻👏🏻👏🏻👏🏻👑

Thanks Karl. Two great guys together. Great vid. You guys rock.

I sit and watch videos from you both doing this stuff and get the different perspective and just love it more. You and Brent compliment each other well and Ester's just sweet bubbly lovely personality just makes it better. Of course the puppers and going for a few boots were just icing

How impressive, such friends are rare Karl. In these tough times it’s rearly heartwarming, reassuring to see you working so well together recycling vehicles and tools with such success. Bam bam 2 is a considerable improvement. I like the steel cranium replacement cap!

a rusted burnt frame into a work of art ,, and you used the CAD system to cut the panels .. Great work

Super solid of you to fly out and be the hands and feet that helps!

DD Speed shop drive by even!

I do some blacksmithing and made myself a treadle hammer that swings a 16# sledge hard. I named it BB (Bam Bam) K'Whang. Great minds (and others) think alike. ☺

I gotta start watching these at home and logging into comment, I never miss an episode, but wouldn't know that from my history. Pumped for this one, thanks Karl, love the support shown by everybody for Brent!

So awesome you made it over to give halfass a little bit of a hand epic M8👍🖤 that coupe looked toasted but you two made it look salvageable 👍🤗

Good to hear Brent adopting our local lingo 4:56 G'day Brent 😊🇦🇺 we love you guys down here ..👍👍

These are the best videos on KZread. When people from the communities help each other. Awesomeness at its best❤

so good to see so many come together to help Brent from watching his channel i see he has helped lots of people nice to see what goes around comes around wish i was closer but am in southeast Alabama USA

What can I say....Just bad ass cars and stuff! Buddies helping buddies👍🙏🙏🙏 Many thanks to all the community 😁❤️🏁🏁

I thought I recognize your helper Sir ,his a good man, very knowledgeable ,hard-working , professional ,and smart . I think his nickname is Jap hands . Well you got yourself a good employee.

Thanks for helping Brent. Your awesome Karl!!!!!!

It really nice to have friends who will help you repair your tools so you can get back to doing cool projects. Cheers!

I have the rear end from a 3/4 ton pick up. I now have a use for it. With a 3hp motor it should do whatever I need. Thankyou gents.

So good of you to help him out and gift him the planishing hammer.

Best make sure your torch tanks are full when Karl comes to town ha ha!! Great work guys! Nice to see Brent's shop coming back together.

Twin brothers from different mothers. Make it Halfass Kustom

I broke a window in a 62 Chevy back in the eighties, doing it wrong, and paid a little old Italian man to redo it with new glass, and he did it all by his lonesome in about five minutes to complete success. I sold that truck about thirty years ago, wish I never had. I've also done a 62 GMC, and sold that truck too. The guys who bought them are still owning and happy.

Karl you are a GREAT HUMAN BEING 👍😊

Again thanks for the photos at the Rosehill show. Glad you made it to Brents and gave him a hand. Good bunch of blokes

Glad to see you guys back working and hanging out together again. That crack ''Like a farmer '' is good thing , Brent is the ultimate scrounger making honey out of dog s--t. Thanks for helping out . The top 2 channels in Canada.

One of the local metals myths here in Idaho made a complete car with the tools you show. Another great video! Thanks Carl!!!

Brent, I would really like to see you loading the dog into the truck or car a few times. I had a big dog that would kill to go for a ride, and I remember what fun it was to load her into the truck.

Good for you Karl 👍 helping your buddy Brent tune up the hammer 🍺🍺

Precision sledgehammer work 👌

That was nice going to Brent's and helping him out. I thought that was around the corner but when you gotta take a plane that really counts.👍

Thanks for sharing Karl -Spanky

Great job on the power hammer! You and Brent work great together! Very impressive machine! Take care and I hope you have a video on the trip home in the Mercury!

Thanks for the help Karl

Glad to see you guys do that windshield so easily, doing my 62 windshield next weekend. You guys work great together, more of that on YT!

Karl not only are you bad ass bu a great person and friend to Brent keep on kicking a@#

A Vauxhall Victor diff ye gods Brent has some cool junk! Goodonya Karl for helping put some of Brents gear back together and the new planishing hammer is an awesome gift

Karl you are a legend, what a wonderful thing to do for your friend.

thank you Karl, one great enjoyable episode , you sure are one make it / halfass kustoms

You two guys are so different, but so alike! It comes flowing through the screen the mutual respect, admiration and awe you each have for the other. And the two of you working together is pure video GOLD!

Well I am #3 and damn proud of it!

Ajudar as pessoas nunca é demais !! Sensacional vc fazer isso parabéns 👏👏👏 !! 🇧🇷🇧🇷🇧🇷 mais um episódio pra conta 👊

Its always great to see a community come together to help each other out, keep up the great work. I look forward to your next video. Thanks for sharing the knowledge.

We all need to have mates around. What you're getting on with, helping Brent out. It is the people in life that make it great to start with and in the closing decades. Those times when it's harder to attract the interest of others. As in childhood, with no particular skills yet. And we get older the young blokes are too confident and different to waste much time with us old ba*ta%d$. Yeah that's when you need mates around. Like you boyo!

And yeah,ya just got to ❤ 🎶

I'm watching you now because of your generosity...THANK YOU!

That tail section the diff came from, would make a kool rat rod pickup bed

Back in the 60s my uncle used that same differential system to make a PTO driven differential to form a Pulp wood trucks winch to pull and load pulp wood onto a truck back in Louisiana. He was somewhat an engineer after WWII. He used the E brake as the controller for the winch portion like you were thinking...

Glad to see that dude smiling again

Thanks Karl for coming to help Brent. It's great to see friends giving a hand when misfortune strikes. Watched this on Brent's channel and now rewatching on yours. Views, likes, and comments all around. Thanks and we'll see you next time.

That's what's wrong with this world people don't help out like we do and you do so many people are just stuffed inside and to afraid to land a hand I was raised at your hand and help somebody just like you were excellent job

@MakeItKustom

11 ай бұрын

It was fun to visit ! I would come out again in a heartbeat

New subscriber Brent from channels thanks for taking the time to help !

Great job. Thanks for helping Brent.

Great video guys fantastic Karl for helping Brent rebuilding his shop ❤

I love it when scrap on hand becomes a cool build!!

2 good guys hard at it. Well done for making extra efforts karl.

Came here from just watching Brent's videos. Such an awesome thing to do for Brent and Ester. Liked and subscribed and am currently watching your video. 👍🏻

you two seem as one mind , great episode , thank you

Decades of collecting old iron! 4 wheeling on a forklift! Yer styling! What a gearhead paradise….. andI did see the Cobra on the way in😮. Too cool! And that Baldor will last forever. New belt on the list? You know that will be the next issue….😅

Well done Karl a great friend! You and Brent and not forgetting Dan @ddspeedshop my favorite spanner guys thank you 💕

God bless an thanks for helping Brent out man I no he really appreciated it

Thoroughly enjoyed this video, thanks for creating it.

you are a top man Brent has not been the same from the fire I have been worry about him thank you Bro for helping 👌👍👌👍♥

oh you guys make a great team...fun to see Pablo sit*n with you two for a putt'...Blessings coming your way....☝😎

Karl that was some cool stuff hooking Brent up with tools, and helping the man out when he is down. I just can't see how you can get excited to see Dan from DD Speed as the guy is a complete hack.

Karl and Brett changing the game. It's great to see this video awesome. Great to see. Can't wait to see more videos soon my friend. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God bless.

Go nuts, you guys. Your skills are obvious and probably helps a lot of people.

You the man Karl. A great friend in deeds.

BadA$$ dudes working together. I’m glad to see him on his feet.

Thank You So much for helping Brent and Ester! We love your channel too, you guys are great together. The Butcher and the Perfectionist! It'll be Fine! It'll work out! Seeing you and Pablo in the 32 was awesome!

Your helping Brent and this video convinced me to subscribe. Keep up the great work.

I discovered your channel when you give Brent a helping hand. Dude you Rock! Well I can tell I will enjoy your channel now, subscribed!

Sweet pack job on the tools

Glad to see you guys using a Coors box for a template rather than a Bud Light box. If you had used the Bud Light Box you would have had to wear a dress when using this power hammer!!

Couldn't believe the way you all got sage out of Brent coupe learned a lot