What are the symbols and letters popping up throughout the video?

@JAMSIONLINE

3 жыл бұрын

They were supposed to be captions, but I botched it! I am going to try and fix it later but no promises lol

@secondchancecycles248

3 жыл бұрын

@@JAMSIONLINE Ahh I see. Love that you’re working with your dad and that yall are keeping these older machines and techniques alive! Keep up the good work.

@Zantrop64

3 жыл бұрын

@@JAMSIONLINE I'm almost disappointed it wasn't a code to crack xD

@DieselTechBryan

3 жыл бұрын

Same question I was wondering lol

@JeffStewart78..

3 жыл бұрын

Cool video this is so interesting.

I restore a lot of tractors and I sure wish I was a better machinist. The machinists around me don’t like to work on anything they can’t just put in the CNC with preset values. The ones who will are getting older and retiring. Glad to see a young feller such as yourself learning and more than likely taking over the family business. Great work as always. I’m glad my son showed me a Tik Tok y’all made which brought me to your KZread channel.

@JAMSIONLINE

3 жыл бұрын

I hear what you’re saying! I kinda like these old tractor engines but sometimes they are a LOT of work to do the right way. Tell your son I said thanks for showing you the videos as well! 😁

@tomtke7351

5 ай бұрын

when you say "young one taking over the business" you should include that he'll either have his own son to continue the cycle or find someone (young) to be son like in continuing the journey. I once heard that a business' value inludes a book of LESSONS LEARNED -- i.e. 'don't do this' lessons.

One good machinist is worth more than all the congressman in Washington

@JAMSIONLINE

3 жыл бұрын

Lol well it doesn't take much...

@diegoavila4379

3 жыл бұрын

Bro a used car sales man is cleaner than all of Washington DC

@jeffreyverry7151

3 жыл бұрын

Damn Straight!!

@petegeralis7076

3 жыл бұрын

@@JAMSIONLINE we know... but we appreciate you!

@aarongrabowski3775

3 жыл бұрын

A bad machinistis worth more than all the congressman in Washington!!!

Your old man has some great knowledge stashed away in that brain of his. It's also great to see the younger generation taking interest in a trade that runs in their family. My family is all welders except me. I had to be the black sheep and be a heavy mechanic. I'm still invited to Christmas though, lol.

@duanepierson4375

3 жыл бұрын

I had bought a Lincoln SA200 to rebuild. Ended up selling it to a pipeliner that would rebuild it. The thing was the Continental F-147 was meant to be rebuilt “in frame,” how ever the rebuild kit was 3X cost over a SBC.

I've never heard of a machinist that actually took the time to clean up the chips as they go, let alone prevent them from flying all over creation. kudos, my man.

Love seeing all the Sunnen equipment. My grandpa worked for them for over 35 years, I guess he was right saying they're the best on the market

Nice! People don't realize the amount of work it take to make something better than original!

I'm a 76 year old guy and retired pilot. I have never had an interest in the sort of engineering you do, BUT I have to say, I'm totally fascinated by what you and I look forward to each video. In fact I go looking for the old videos to feed my new habit. Thanks for sharing your passion.......

I'm glad you popped up into my stream two weeks ago. One of the best channels on KZread.

Excluding a few of the Christian videos I watch, yours are the best I've seen. Not only are your machining skills outstanding, but your presentation is fantastic. I always watchi all of your videos to the end. Thank you for taking the time.

I am totally amazed by what can do on this old stuff. Looks great

Great Vidio, great to see your dad and you working together. I have learned a lot watching the two of you. Thanks Cliff

Great video! Love watching these old JD blocks get rebuilt. The relief valves underneath are called Petcock’s there a decomposition valve so there easier to start by hand. Had a friend build a costume block from well casing to build a stroker motor in there JD G, they were 9” Caterpillar Pistons when they were done. Also a quick hack we used for drilling the plug hold in the repair sleeves was use a broken spark plug as a guide. Just my two cents. Anyway again great video. Keep up the good work. Be well my friend.

@regdor8187

3 жыл бұрын

Well, with a thorough "decomposition", what is left to run? ;^)

@moorepower7

3 жыл бұрын

9" bore G???? Not buying it. I've been involved with several 8" Gs and know what it takes to make that happen, there isn't another inch on each side.

@heyallenify

Жыл бұрын

​@@regdor8187 I think that was meant to be a decompression valve, or a compression relief valve. (Yes, this is from someone finding the video a year later and you probably already knew what autocorrect mangled...)

My new favorite channel on KZread for sure

Looks better than new!

When my dad was a dealer they still made new parts for those back in the 80's. We ordered an block for A back then.

"No energy system can produce sum useful energy in excess of the total energy put into constructing it. This universal truth applies to all energy systems. Energy, like time, flows from past to future". Thank You Jim et al, amazing videos indeed.

I had my JD A block bored to 5 5/8". The first shop screwed up the cylinder and put a sleeve in. It came loose and went in to the crank case. The second shop rebored for a larger sleeve. This shop pined the sleeve to the block in three places at the bottom of the bore. All is fine now after twenty years of pulling! I also use candle wax to lubricate bolts when removing them from casings. The bolt should be cool enough not to light the wax and hot enough to have the wax run like water. Penetrates very well. Patience, patience, patience! Great videos..

Beautiful work!! From someone who started rebuilding engines in a machine shop before he was 18 years old. I got to work with one of the first two Sunnen Ck10 machines in California in 1970 at Merced Junior College. Man how the equipment has improved in the last 50+ years!!

Something I found useful is from K&S Precision Metals. It is a brass tubing found at most hobby shops and hardware stores. Each size of tubing will fit over or inside of the next size tube. I use this tube when I need to drill out broken bolts or holes as you did in sleeves and other things. I place the size tube that fits inside of the hole with the broken bolt. If necessary I can use a few more tubes inside that tube and than a drill bit inside of those. The tubing keeps the drill bit centered while drilling a hole in the bolt. This is very useful when trying to protect threads from a spinning drill bit. Hope this helps.

got to say i tried a long cylinder bore and didn't fair to well for me hats off to you and your dad, you guy's display good machining habits you don't see in the world of automotive machining anymore.

Love your videos man, your very humble and can appreciate a father teaching his son a trade, keep up the good work..I’m subscribed and will probably watch all your videos and will be giving a bunch of thumbs up

massive respect to you and your father for the great work that you put into the machine work

I'm Shure the precision machining has greatly improved since that block was first manufactured. That should be a much finer engine block than the factory ever produced.

Good job! That’s my favorite tractor. I just love that sound they make. I only operated the hand start ones too. Thanks Ron

I really like this video. My Daddy had a Poppin Johnny from 1946 till 1950. I love that sound.

This is great to see you n father working together .Keep up the good work.

Stellar job/explanation/videoing!!

Your not just a machinist.....your an artist !!!

It's great to see that at your place that quality and pride are still number 1.

Better than new perfection that’s what makes repeat customers

I feel like the process and results here are far better than factory.

To add on one of the previous comments... That is one of the cleanest shops I've ever seen!! ... Love the videos

Great video. (Like always). Thanks for taking the time to show us your skills...

In 2014 I bought a JD X300 to do my lawn, I love it! I wish i had bought it years before that.

Love watching these video's. You and your Dad do great work.

I just started watching you guy's a short while ago. Awesome content, awesome tools, awesome craftsmanship.

Very nice work hats off too your dad for the fine hone job looks like a work of art

Great video! Really enjoy all the content you post, including the shorts. You and your Dad have a nice business there. I hope you keep enjoying the work with him. I worked in my Dad’s small-engine shop for 5 years before I left for the Air Force. Was such a great learning experience. Keep the videos coming.

It's a good channel and I say keep up the good work on your A/V production. Thanks for bringing it!

17:50 That satisfying moment when the broken stud starts to move after a lot of work 👍

Wow! Incredible machines! Very exacting work. Nice job!👍

Love the videos. I spent a lot of time at my grandparents place. My granddad had a B Model I think. It had the foot starter and what he called a suicide clutch. Didn't take me long to figure out why it was called that. Once it was engaged you had better give yourself room to break the clutch loose. This video brought back a lot of great memories. We put new rings and bearing in it when I was about 14. We got it back together and I can remember my dad's smile as he adjusted the carburetor down as low as it would go, it didn't have a tach so I can't be sure be it had to be something like 50 to maybe 100 RPM's I know it was a considerable amount of time between each cylender firing. Thanks for the videos and memories.

Outstanding work!

The two holes you drilled are for petcocks to release compression to ease starting when hand cranking engine. Early John Deere’s were hand cranked turning flywheel by hand. Excellent workmanship.

Well done video with lots of good information. I've always wondered what those big two cylinder blocks looked like. Now I know.

Great segment

Great content. Great explanations. Great entertainment. Would like to see/hear about more obscure type engine building machine work like piston knurling and bearing shimming. I am sure y’all Probly never or rarely do such but it’s still pretty neat to see and hear about when parts are no longer available for old or rare motors.

I love watching stuff like this!

Splendid machine work

I worked for JD for 22 years and never seen one of those engines apart. Enjoyed the video. GW

I was a corporate store manager for the only NAPA Auto Parts in Portland OR with a machine shop. All I know is the market that I managed, and DAMN was it hard to gain business to keep the shop alive. I had two phenomenal machinists too! Both of them with over 30 years experience, and I never had issues with them or the work they put out. Customers loved em too! Congrats for you and your pops being able to keep the doors open & hopefully thriving. Good idea starting KZread- the additional revenue might be what keeps you guys afloat one day, who knows! 😀 I'll keep my eyes peeled for new uploads! Glad to see y'all in the space!

@prevost8686

3 жыл бұрын

I’m an old mechanic and I remember when every CarQuest and NAPA had a top notch machine shop in them. That was back when they catered to professional mechanics. Now they’re no different than AutoZone peddling Chinese garbage parts.

@allensandven0

Жыл бұрын

I’m sure that was a really hard market with all the recyclers down there and wholesalers ever one now days just wants to swap out for new or reman , I’m outside of Yakima and my father in law was an old school mechanic / machinists after he passed no one wanted any of his valve and head machines , I didn’t know how to use them , I did find someone that would take them and a lot of tooling … I think the tooling is what they really wanted . Hopefully they got some use out of them . I watch eBay for a while just to see if they went straight up for auction ?

You dads a cool guy gather his knowledge while you can, love your content

Looks factory new again. Cool job!!

Awesome work!

@JAMSIONLINE

3 жыл бұрын

Thank you!

Awesome job!!!

cool video... always fascinating to see machine work. Thanks

@JAMSIONLINE

3 жыл бұрын

Thank you!

Great job lads

Beautiful work! Well-filmed as well.

Lookin' GOOD!!!!

You guys did a fine job on that old block better than new.

Great work

Great video. Lots of detail. Love it. Keep up the good work.

That was awesome!

Brain: Man this is cool Also brain: 2:07 DOGGOS

Great job ! I am impress on how much care you are both taking in doing your work. I would not hesitate one minute in bringing an engine to your shop for rebuilding. On the other hand I was a bit surprise when I saw you drill the spark plug and decompressor holes by hand. I am used of seeing you taking so much care. I know a set-up on a press drill would have taken time but it would have maybe reduce your stress and reduce the risk on damaging the block. For the spark plug holes a drilling sleeve with OD fitting the thread and ID fitting your need would have helped you with the alignment and protected the threads… Anyway I understand this was a unique job again and noway I could have done better the entire job. Well done and thanks for sharing!

Loved it. Thanks

That was a lot of work 👍 great job !!!

Never had the opportunity to hang out in a machine shop. This was really fascinating.

Great Job!!

Great job

Great job, cool video!!

Nice 👍 very big sleeve fitting and cylinder bore and hone👍

I love watching videos like this. This would be my dream job

I’d love to see this motor running and pulling. In the 80’s I planted and cut beans with a 1947 Model G and a bean rake with a Model B. Those things were built to last. The planter was a 1947 Ventura. Farm equipment was being produced again after WW II. Europe and Russia were short on food production.

Good work ethic and good people

True artistry

You guys make a good team nice work boy’s

In my 30+ years of working on aircraft, I have picked up (drilling a hole from an existing part into a new part) thousands of holes. Usually in expensive parts. A safer way of drilling the spark plug and compression release holes without damaging the threads would be to make a drill bushing. That way, you can drill the pilot hole at the exact angle. Then drill the holes to size using piloted core drills. Works every time. Less chance of "we messed up".

I’ve have a jd A hopefully nothing happens to the cylinder because that was a lot of quality work to bring it back to stock

Awesome video

Nice work

I like your videos because there are about engines but also they are very educational

Wow! I sure would love to work there and learn all that stuff! My respects!

Certainly one of the more unusual engines you have shown

I hope that I can find a machine shop that is that meticulous and precise as you are. ❤❤❤❤❤

Nice work bud!

Very nice job. Literally better than new! Just an idea, make a threaded bushing or use the steel part of an old spark plug as a guide to drill your new holes, it'll center the bit.

@chrisjarvis4449

Жыл бұрын

ya i will second that . as it just to ez to slip with that drill and get into the org. threads doing it free hand . a drill bushing that is tap drill size for the spark plug thread on the o.d. but if you could set it up in you seat and guide machine then you could just float it in but at that angle it would be a beach . but hey it look like you have done this a time or two so do what works for you

I I I don't know what to say? I'm at a loss for words. Perfect, comes to mind.

Good job getting that broken stud out.

Interesting to watch! would like to see what the finished engine looks like and how it runs sometime... Good job, Ron...

It would be great to see the engine Running in tractor as followup Video plus the jag engine or anything vintage you rebuild thanks For sharing this video

On the chamfer you did on the bottom of the sleeve/block intersection "blending" ... you did it right. Number one rule in machining is that there are NO "sharp edges" in metals ... causes crack propagation ... 40 years in Aerospace all over the World and my number 1 pet peeve ... LOL. Enjoyed watching you work on cast iron older than you and your Father's ages combined. GREAT JOB !!!

@craigsowers8456

Жыл бұрын

Also pro tip on "Bolt extraction" ... put a thin copper washer under the washer/nut and you won't weld to the steel/iron surface ... easier to turn the welded bolt ... won't bind up.

Nice. Keep up the awesome content.

@JAMSIONLINE

3 жыл бұрын

Thank you!

Fun to watch👍👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

I enjoyed your video.

Great vid thanks

You have done an incredible job with that block. Wish I knew where you were located so you could do mine!

Great job, new subscriber, thank u from nyc

Great machinists. Excellent feel for machinery. And a great video. Hope they made enough money on that job.

@JAMSIONLINE

2 жыл бұрын

Thank you! Seems like we never do. Lol