This is a DIY for the Gen 5 Camaro rear fascia removal.
Жүктеу.....
Пікірлер: 46
@noillcallyou3 жыл бұрын
Man I love youtube. I am not a car guy. But youtube has saved me so much money. This is what people need. More straight forward videos like this.
@charliebrown30429 жыл бұрын
Another thing that will help. Even keeping an upward push on the quarter panel will not keep the tabs from breaking in front of side marker lights. Best thing to do is take that thin trim pry tool, blade end, and push it in the crack and find the tabs. when you've found it, push down a little and it will "release" the tab clip rather than just pulling it out with brut-force.
@KhabukiJo11 жыл бұрын
One of these just came into the shop and I was looking all over the place for a bolt next to the tail lamps. Had no idea it was just a clip. Thanks for this video. You saved me a ton of grief.
@charliebrown30429 жыл бұрын
I have done this so many times working on my backup light bulbs I can do it in my sleep. It really is easy to do when you have finally done it once and get over your fear. However, there is a slight mistake in this video. The correct Torx is a T-20. A t-15 will work and seem like it is the correct size, however, one little slip up and you strip out the hole. The body guys at Chevy told me it happened because I used the wrong size Torx. So, use a T-20!!!
@paulhuwa1730
3 жыл бұрын
Good video and explanation but I would live to meet the person who designed the backup lights so you had to remove the bumper to change the stupid bulb. Idiot
@tonyevans1401 Жыл бұрын
Thank you much because I was lost until I saw this
@jthomp975 жыл бұрын
Thanks man! Do you think that you could do a video on how to put it back on properly?
@gonadus9 жыл бұрын
Appreciate this... I do PDR and am dealing with this having to do this on a hail car. It comes off much in the same way a Honda Accord/Civic. Well done.
@Screamhollow3 жыл бұрын
Thank you so much! I had no idea how to take the rear bumper off. Great video!!!
@GearSwinger9 жыл бұрын
You Rock. Getting ready to do this and pulled up your video under a quick search. Thanks.
@rudyperez79367 жыл бұрын
great video straight to the point and every step clearly explained thank you man !
@rkwatchauralnautsjediparty73034 жыл бұрын
Excellent, no-nonsense video. Thank you.
@robertdelgado52362 жыл бұрын
Great video
@thedarkphire338 ай бұрын
Getting the rear bumper off these cars are pretty darn easy. It's the front that is a little bit more trouble. Another reason I say these Cars are designed with customization in mind.
@BumblebeeDeeDee2 жыл бұрын
I own a 2012 Camaro and just got rear ended by an idiot. Need to replace the whole bumper on my bumblebee. I was wondering about the white rear back up lights and how you unhook them from the bulbs/sockets. Are there clips or wires because they light up or do they come off with the entire bumper Could you please help me by explaining? Your video was very easy to follow! I just need help with the reverse lights and how they disconnect before I try to replace it! Thank you! 👍🐝👍
@AlexGonzalez-de3kl6 жыл бұрын
Really helpful now I can change my reverse light bulbs to LEDs 👌🏽
@jbgjohnnymatrix3386 жыл бұрын
Thank You for making this video ! Great Soul !
@duce1853 жыл бұрын
Easy Peasy no big deesy. Nice video
@Soundplus139 жыл бұрын
Charlie. You are correct. It is a t-20. Good catch.
@Soundplus133 жыл бұрын
those tabs are actually molded into the plastic. I don't believe we are talking about the same thing.
@1984Pturner3 жыл бұрын
Thank You!
@timallen54838 ай бұрын
Thank you!!
@WackoKillerDan11 жыл бұрын
How do you put it back on
@remyreji200410 жыл бұрын
thanks a lot! this saved me a lot of time going to and from the local shop! your awesome! :)
@josephgogan69818 жыл бұрын
I have a 2014 1lt. is this the same procedure? I can get the sides off but when I go to pull the read toward me it doesn't want to seem to budge. I took off all the screws torx and 7mm. I am trying to do a tail light swap.
@marinaoconnor64327 жыл бұрын
Big joc608 Awesome video can you do a video of how to install gm ground effects especially the side skirts and rear defuser Thank You
@isaiahjones7583 жыл бұрын
what are those tabes called? The ones you didn’t want to break, i need some for my 5th gen camaro and Don’t know what they are called
@Joey-ri3vs8 жыл бұрын
thanks for the video I'm thinking about putting a quad exhaust on my 2015 SS Camaro its an automatic with the single dual exhaust already on it instead of two trips I will have 4 exhaust tips what do you think
@michaeldicicco806610 жыл бұрын
thanks for posting this
@djkaneck17 жыл бұрын
Wow! Somebody hit my camaro and damaged the rear bumper. I found out the rear bumper is only $120.00 but I gotta get it painted. Thanks
@therisk668 жыл бұрын
Thanks for the video!
@alexpowers36977 жыл бұрын
You rock--thanks! I cannot believe I have to do this if I want to install my reverse camera. $#&%#*#*$( I think I have to find an alternate way to power the system.
@nettodanne7 жыл бұрын
Many thanks !!!!
@leroyrivera227 жыл бұрын
Thank You Very Much!!!
@allurevibe9 жыл бұрын
Do you have the rear sensors on yours? How hard was it putting them back on?
@andrewrobles32148 жыл бұрын
thanks for the video
@KuyaSphen5 жыл бұрын
So much easier than the front bumper
@kentil89556 жыл бұрын
thank you for the vid!!!!!!
@micheauxgreen2356 жыл бұрын
How hard do you think it would be to convert the old rear bumper style to the 2014-2015 style.
@ryanchristensen1799
6 жыл бұрын
Micheaux Green it won't fit, 14-15 is molded differently than the 2010-13 style. 14-15 is more rounded where as the older style is more pointy in the middle. Plus the tail lights are completely different as well and the bumper is molded differently around the tail lights.
@billiebobbienorton25567 жыл бұрын
Gracias!!!!!!
@mandangalo7210 жыл бұрын
Thanks MAN!!!
@ThaHammieJaassee9 жыл бұрын
Can you make a video of how to remove the rear speaker deck? I've looked all over KZread but no one has a video
@Soundplus1312 жыл бұрын
pull straight out towards you. you are not trying to rip ot off the car.. just pop it loose
Пікірлер: 46
Man I love youtube. I am not a car guy. But youtube has saved me so much money. This is what people need. More straight forward videos like this.
Another thing that will help. Even keeping an upward push on the quarter panel will not keep the tabs from breaking in front of side marker lights. Best thing to do is take that thin trim pry tool, blade end, and push it in the crack and find the tabs. when you've found it, push down a little and it will "release" the tab clip rather than just pulling it out with brut-force.
One of these just came into the shop and I was looking all over the place for a bolt next to the tail lamps. Had no idea it was just a clip. Thanks for this video. You saved me a ton of grief.
I have done this so many times working on my backup light bulbs I can do it in my sleep. It really is easy to do when you have finally done it once and get over your fear. However, there is a slight mistake in this video. The correct Torx is a T-20. A t-15 will work and seem like it is the correct size, however, one little slip up and you strip out the hole. The body guys at Chevy told me it happened because I used the wrong size Torx. So, use a T-20!!!
@paulhuwa1730
3 жыл бұрын
Good video and explanation but I would live to meet the person who designed the backup lights so you had to remove the bumper to change the stupid bulb. Idiot
Thank you much because I was lost until I saw this
Thanks man! Do you think that you could do a video on how to put it back on properly?
Appreciate this... I do PDR and am dealing with this having to do this on a hail car. It comes off much in the same way a Honda Accord/Civic. Well done.
Thank you so much! I had no idea how to take the rear bumper off. Great video!!!
You Rock. Getting ready to do this and pulled up your video under a quick search. Thanks.
great video straight to the point and every step clearly explained thank you man !
Excellent, no-nonsense video. Thank you.
Great video
Getting the rear bumper off these cars are pretty darn easy. It's the front that is a little bit more trouble. Another reason I say these Cars are designed with customization in mind.
I own a 2012 Camaro and just got rear ended by an idiot. Need to replace the whole bumper on my bumblebee. I was wondering about the white rear back up lights and how you unhook them from the bulbs/sockets. Are there clips or wires because they light up or do they come off with the entire bumper Could you please help me by explaining? Your video was very easy to follow! I just need help with the reverse lights and how they disconnect before I try to replace it! Thank you! 👍🐝👍
Really helpful now I can change my reverse light bulbs to LEDs 👌🏽
Thank You for making this video ! Great Soul !
Easy Peasy no big deesy. Nice video
Charlie. You are correct. It is a t-20. Good catch.
those tabs are actually molded into the plastic. I don't believe we are talking about the same thing.
Thank You!
Thank you!!
How do you put it back on
thanks a lot! this saved me a lot of time going to and from the local shop! your awesome! :)
I have a 2014 1lt. is this the same procedure? I can get the sides off but when I go to pull the read toward me it doesn't want to seem to budge. I took off all the screws torx and 7mm. I am trying to do a tail light swap.
Big joc608 Awesome video can you do a video of how to install gm ground effects especially the side skirts and rear defuser Thank You
what are those tabes called? The ones you didn’t want to break, i need some for my 5th gen camaro and Don’t know what they are called
thanks for the video I'm thinking about putting a quad exhaust on my 2015 SS Camaro its an automatic with the single dual exhaust already on it instead of two trips I will have 4 exhaust tips what do you think
thanks for posting this
Wow! Somebody hit my camaro and damaged the rear bumper. I found out the rear bumper is only $120.00 but I gotta get it painted. Thanks
Thanks for the video!
You rock--thanks! I cannot believe I have to do this if I want to install my reverse camera. $#&%#*#*$( I think I have to find an alternate way to power the system.
Many thanks !!!!
Thank You Very Much!!!
Do you have the rear sensors on yours? How hard was it putting them back on?
thanks for the video
So much easier than the front bumper
thank you for the vid!!!!!!
How hard do you think it would be to convert the old rear bumper style to the 2014-2015 style.
@ryanchristensen1799
6 жыл бұрын
Micheaux Green it won't fit, 14-15 is molded differently than the 2010-13 style. 14-15 is more rounded where as the older style is more pointy in the middle. Plus the tail lights are completely different as well and the bumper is molded differently around the tail lights.
Gracias!!!!!!
Thanks MAN!!!
Can you make a video of how to remove the rear speaker deck? I've looked all over KZread but no one has a video
pull straight out towards you. you are not trying to rip ot off the car.. just pop it loose
:) !!!!!!!! :)
Great video