How to change the rear brake shoes on a Nissan Sentra.
Жүктеу.....
Пікірлер: 69
@bitto6511 жыл бұрын
You actually have cars with drum brakes, crikeys, I havn't seen a drum brake system on the wheel brakes (still see them occasionally on shaft brakes and hand/emergeny brakes) in over 10 years. I have been a mechanic for 30 years including 12 years in the RAAF 1/35th Sq. Job well done Rick. Cheers to you n Mary budy Lee
@MrMJC196811 жыл бұрын
Cool vid Rick. Every time I replace the rear shoes I always put masking tape on the face of the shoes to keep all oil and greasy fingerprints off, then pull the tape off when I put on the drums. Cheers !! :)
@Bonbonbon7393 жыл бұрын
Dude you’re a lifesaver I have a 2001 Nissan Sentra and I won over a pothole and the back driver side tire started grinding, I took the tire off and the adjuster and the spring fell right off on the left shoe. I was going to take it to a repair shop because I’ve never done drums before but this looks easy as hell
@BergKnowsBest6 жыл бұрын
Thanks for the overview. Just did my brakes this morning and your video helped with a few questions. First side took an hour, other side maybe 15 min. LOL
@ferndog1461 Жыл бұрын
Thank you. Doing my Mom's 03 Sentra with 85K on ode. She didn't need new rear drum brakes. I just cleaned with brake clean. If you don't go over 45 mph, the rear drums probably last till 110K.
@workonitm811 жыл бұрын
Good to see you Rickem, it's been a while. Nice to see you doing some projects too.
@swaggie58035 жыл бұрын
Thank you Fella`s . You make it look really easy. Cheers.
@UBBERTANKER11 жыл бұрын
lol floor jack on gravel so unsafe
@andrewriley12311 жыл бұрын
Awsome vid Rick... You need to do Blog TV more often haha... Hopefully not have another doggy accident on the floor lol.. I tried to warn ya's but no one would listen haha... good times with Rickem.
@abidou199911 жыл бұрын
My Equinox 2006 has the same set up for the front brake!Your right about the old style chevy.They had a pin treaded to the calliper.Very easy to do the front brake on mind.By the way,you should always put some grease on the back plate for the rear brake.You glove are a little to big to do a job like that.LOL Nice vd.Thanks.
@Seegalgalguntijak11 жыл бұрын
There are almost only standard shift vehicles, but on mine, I almost never use the e-brake, except when I'm parking at a slope. I always put it in 1st gear, which really is enough to hold the vehicle. I don't want my e-brake to freeze to the drum in winter times or something like that...
@Viking88Power11 жыл бұрын
Great video Rick!
@shawnsutube11 жыл бұрын
Another thing is, if you look on the drum where the lug studs come through you'll notice to extra bolt holes, those are threaded so you can run two bolt into them and it pushes against the axle and pops the drum off so you don't fatigue it like you did with the mini sledge.
@ramtuff200711 жыл бұрын
awesome video rick
@dempster198111 жыл бұрын
survive however possible rick some r very jealous of you. we love your videos
@dlock11 жыл бұрын
I love your comments on Rick's videos's man! So funny and so true! He's taking taxpayers for a ride. He's a really bad person!
@UBBERTANKER11 жыл бұрын
The issue is the jack is supposed to roll as it lifts up on the car and on gravel it doesnt move easy or at all. This can cause th jack to tip over
@AUSSIE1PRIDE11 жыл бұрын
Plus little tricks like throwing the wheel that's been taken off, under the chassis.
@blaster181211 жыл бұрын
lol just meet this dude at a random drunk gathering and he ask if you can do brakes? awesome lol
@AsocalRedneck11 жыл бұрын
wheres the e cigg rick? is it worth the money?
@locouk11 жыл бұрын
Don't you use axle stands?
@shawnsutube11 жыл бұрын
Rick, go back and look at the video, you put the shoes on upside down and backwards, the fiber part goes all the way to the end of the metal part on one side of the shoe. There is a front and back shoe, they're not all four the same.
@lukethekanefan11 жыл бұрын
done that soooo many times not a single problem if the cars wheels are chocked the jack will not slip on the gravel floor anyway
@billyumbentley2111 жыл бұрын
Hey Rick keep the vids coming for get the haters just say I see you. HI HATERS Lol
@markavelitv41405 жыл бұрын
Thanks doing my Nee'Son today!🤣 Cheers and Beers brother!!
@EduardoPiston11 жыл бұрын
That´s nice. I do like brake work, but some models are a pain in the ass. I´m in Brazil.
@Markkurautmaa11 жыл бұрын
Greetings from Finland Ric
@shivanandparia52827 жыл бұрын
thanks it helps so much.
@alwaysgoodinthewoods11 жыл бұрын
Shoulda lubed the backing plates on the drums. To compress the piston on the front use the old inboard pad, nothing better.
@ghostie11200411 жыл бұрын
man u gotta get that speedex out before winter hits what happend to the rompin vids
@fixnethin11 жыл бұрын
Lol everyone is talking about jack stands, and safety glasses, and the jack being on gravel, ya being safe is important, but he's showing you a real world fix for a real world prob, iv driven tow trucks for years and I can tell u from experience, it isn't safety glasses and jack stands that help you keep all your fingers n toes, its paying attention!
@b1gzdu3211 жыл бұрын
why you dont start your own chop rick you got talent to repair vehicule what you thing about that man ???
@miguelmarrufo54378 жыл бұрын
good video thanks !
@somethingtrulyhorrifying11 жыл бұрын
probably will if the job is underneath the car
@Idontwantthizname11 жыл бұрын
That's allot of stuff man !!
@locouk11 жыл бұрын
This damn video just isn't loading for me, my other subbed vids are ok..
@dogasaursrex32811 жыл бұрын
oh rick we all know how to change brakes!
@TheronD11 жыл бұрын
What happened to the E cigarettes? I knew that shit wasn't going to last .
@thinkpad41111 жыл бұрын
Exactly... i was once told, any idiot can replace parts on vehicles, it takes a mechanic to know how they actually work and principles of operation.
@ethanlindsey11 жыл бұрын
You didn't grease anything Rick.
@laryctdummy11 жыл бұрын
Ever heard of Brake-ease or Anti-sieze? Those parts need lube! not a hammer to remove paint?????
@MichaelRei994 жыл бұрын
What kind of idiot would work on a car without using a jack stand?
@phazer909111 жыл бұрын
Rick since everybody makes bad comments and very ignorent comments about you not working. Make a video why you dont work, is there a reason? That way some people will stop making rude comments
@Bunkers10111 жыл бұрын
Really?
@thedoubleB1511 жыл бұрын
Drum brakes are the devil!
@crazycanuck974011 жыл бұрын
should of used a new hold down kit
@freakshow200011 жыл бұрын
one can fix every nissan problem at one time with 20cents of gasoline and a 1 cent match....
@moparkid9511 жыл бұрын
Amen!
@madman112411 жыл бұрын
why is he not wearing safety goggles while hammering on the drum..... lol bit of a problem.
@ryanlytle433811 жыл бұрын
your right fixnethin
@ramtuff200711 жыл бұрын
cheers shw eeeet
@gm1965111 жыл бұрын
i would never get you to do my brakes. maybe you have a idea lol but you dint even clean the rust off or lube anything. not the backing plate , nor the emerg. lever nothing. those brakes will be siezed up after this winter , if not before. hes going to wear out his front brakes prematurely .. good luck to your buddy. oh lol they are called shoes and not pads by the way... cheers .......
@camarotwofast11 жыл бұрын
dave was making 100.000 plus a month!
@Paradurodov11 жыл бұрын
CHEERS
@D4x4Bronc11 жыл бұрын
Rick share your knowledge some more. I know you know the ford trucks.
@stylinwiley11 жыл бұрын
NESON not NESAN
@craigdundas87219 жыл бұрын
Angus young does brakes lol awesome lol
@motobox123211 жыл бұрын
hey rick you want a job? we'll start you at 22/hr
@dlock11 жыл бұрын
Goes to show you Rick- you CAN do something of value. You have to get a job and start paying back tax payers man. This isn't right what you're doing being on welfare. It's not right Rick..! Do your share!
Пікірлер: 69
You actually have cars with drum brakes, crikeys, I havn't seen a drum brake system on the wheel brakes (still see them occasionally on shaft brakes and hand/emergeny brakes) in over 10 years. I have been a mechanic for 30 years including 12 years in the RAAF 1/35th Sq. Job well done Rick. Cheers to you n Mary budy Lee
Cool vid Rick. Every time I replace the rear shoes I always put masking tape on the face of the shoes to keep all oil and greasy fingerprints off, then pull the tape off when I put on the drums. Cheers !! :)
Dude you’re a lifesaver I have a 2001 Nissan Sentra and I won over a pothole and the back driver side tire started grinding, I took the tire off and the adjuster and the spring fell right off on the left shoe. I was going to take it to a repair shop because I’ve never done drums before but this looks easy as hell
Thanks for the overview. Just did my brakes this morning and your video helped with a few questions. First side took an hour, other side maybe 15 min. LOL
Thank you. Doing my Mom's 03 Sentra with 85K on ode. She didn't need new rear drum brakes. I just cleaned with brake clean. If you don't go over 45 mph, the rear drums probably last till 110K.
Good to see you Rickem, it's been a while. Nice to see you doing some projects too.
Thank you Fella`s . You make it look really easy. Cheers.
lol floor jack on gravel so unsafe
Awsome vid Rick... You need to do Blog TV more often haha... Hopefully not have another doggy accident on the floor lol.. I tried to warn ya's but no one would listen haha... good times with Rickem.
My Equinox 2006 has the same set up for the front brake!Your right about the old style chevy.They had a pin treaded to the calliper.Very easy to do the front brake on mind.By the way,you should always put some grease on the back plate for the rear brake.You glove are a little to big to do a job like that.LOL Nice vd.Thanks.
There are almost only standard shift vehicles, but on mine, I almost never use the e-brake, except when I'm parking at a slope. I always put it in 1st gear, which really is enough to hold the vehicle. I don't want my e-brake to freeze to the drum in winter times or something like that...
Great video Rick!
Another thing is, if you look on the drum where the lug studs come through you'll notice to extra bolt holes, those are threaded so you can run two bolt into them and it pushes against the axle and pops the drum off so you don't fatigue it like you did with the mini sledge.
awesome video rick
survive however possible rick some r very jealous of you. we love your videos
I love your comments on Rick's videos's man! So funny and so true! He's taking taxpayers for a ride. He's a really bad person!
The issue is the jack is supposed to roll as it lifts up on the car and on gravel it doesnt move easy or at all. This can cause th jack to tip over
Plus little tricks like throwing the wheel that's been taken off, under the chassis.
lol just meet this dude at a random drunk gathering and he ask if you can do brakes? awesome lol
wheres the e cigg rick? is it worth the money?
Don't you use axle stands?
Rick, go back and look at the video, you put the shoes on upside down and backwards, the fiber part goes all the way to the end of the metal part on one side of the shoe. There is a front and back shoe, they're not all four the same.
done that soooo many times not a single problem if the cars wheels are chocked the jack will not slip on the gravel floor anyway
Hey Rick keep the vids coming for get the haters just say I see you. HI HATERS Lol
Thanks doing my Nee'Son today!🤣 Cheers and Beers brother!!
That´s nice. I do like brake work, but some models are a pain in the ass. I´m in Brazil.
Greetings from Finland Ric
thanks it helps so much.
Shoulda lubed the backing plates on the drums. To compress the piston on the front use the old inboard pad, nothing better.
man u gotta get that speedex out before winter hits what happend to the rompin vids
Lol everyone is talking about jack stands, and safety glasses, and the jack being on gravel, ya being safe is important, but he's showing you a real world fix for a real world prob, iv driven tow trucks for years and I can tell u from experience, it isn't safety glasses and jack stands that help you keep all your fingers n toes, its paying attention!
why you dont start your own chop rick you got talent to repair vehicule what you thing about that man ???
good video thanks !
probably will if the job is underneath the car
That's allot of stuff man !!
This damn video just isn't loading for me, my other subbed vids are ok..
oh rick we all know how to change brakes!
What happened to the E cigarettes? I knew that shit wasn't going to last .
Exactly... i was once told, any idiot can replace parts on vehicles, it takes a mechanic to know how they actually work and principles of operation.
You didn't grease anything Rick.
Ever heard of Brake-ease or Anti-sieze? Those parts need lube! not a hammer to remove paint?????
What kind of idiot would work on a car without using a jack stand?
Rick since everybody makes bad comments and very ignorent comments about you not working. Make a video why you dont work, is there a reason? That way some people will stop making rude comments
Really?
Drum brakes are the devil!
should of used a new hold down kit
one can fix every nissan problem at one time with 20cents of gasoline and a 1 cent match....
Amen!
why is he not wearing safety goggles while hammering on the drum..... lol bit of a problem.
your right fixnethin
cheers shw eeeet
i would never get you to do my brakes. maybe you have a idea lol but you dint even clean the rust off or lube anything. not the backing plate , nor the emerg. lever nothing. those brakes will be siezed up after this winter , if not before. hes going to wear out his front brakes prematurely .. good luck to your buddy. oh lol they are called shoes and not pads by the way... cheers .......
dave was making 100.000 plus a month!
CHEERS
Rick share your knowledge some more. I know you know the ford trucks.
NESON not NESAN
Angus young does brakes lol awesome lol
hey rick you want a job? we'll start you at 22/hr
Goes to show you Rick- you CAN do something of value. You have to get a job and start paying back tax payers man. This isn't right what you're doing being on welfare. It's not right Rick..! Do your share!
I heard mary broke your nee E-Cigg?
hi i ahve vids youtube
Skid!
nee-san, lol
:/
lmao
Import crap!!