Rear Brake Job Walkthrough: 2008-2020 Dodge Caravan and Chrysler Town & Country

Автокөліктер мен көлік құралдары

In this video we guide you through the process of replacing the rear brakes on your 2008 or newer Chrysler van.
These are the Tools and Supplies I Recommend:
Brake Caliper Compressor Tool-
amzn.to/2UHtxSY
Best Brake Grease-
amzn.to/31JewBH
Nickel Anti Seize-
amzn.to/37f3BAT
As an Amazon Associate I earn from qualifying purchases.
BSG Automotive offers Auto Repair services in the greater Chicagoland area.
Website:
www.bsgautomotive.com
Facebook:
/ bsgautomotive
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “BSG Automotive”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. BSG Automotive shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by BSG Automotive and therefore, BSG Automotive does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge BSG Automotive or anyone affiliated with BSG Automotive, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 161

  • @BSGAutomotive
    @BSGAutomotive4 жыл бұрын

    These are the Tools and Supplies I Recommend: Brake Caliper Compressor Tool- amzn.to/2UHtxSY Best Brake Grease- amzn.to/31JewBH Nickel Anti Seize- amzn.to/37f3BAT As an Amazon Associate I earn from qualifying purchases.

  • @user-qh5dk5st8e

    @user-qh5dk5st8e

    4 жыл бұрын

    Can i take your number pls

  • @ameenkhan8086

    @ameenkhan8086

    Жыл бұрын

    ..

  • @HappyDesertCreature-oc8gs

    @HappyDesertCreature-oc8gs

    4 ай бұрын

    hy

  • @HappyDesertCreature-oc8gs

    @HappyDesertCreature-oc8gs

    4 ай бұрын

    hey

  • @donatospoony
    @donatospoony2 ай бұрын

    Every time I change my pads I watch a re-fresher on you-tube. This is the best brake video I’ve seen so far. ‘Lining up the piston ‘ is something I never knew. One thing that is catching up with me though , at 57 , I’m sick of working off of my driveway . I wish I could go to a location and rent a hoist by the hour .

  • @davidnelson4783
    @davidnelson47832 жыл бұрын

    Great video! Loved the detail - especially the part about making sure the pistons are correctly aligned after you wind them back. I watched several videos and didn't catch that on any but yours. Fantastic! Thanks a ton!

  • @Faith-jd3vd
    @Faith-jd3vdАй бұрын

    This individual is highly skilled and accomplished in their chosen field. Thanks for sharing 👍

  • @Dolomite141
    @Dolomite1414 жыл бұрын

    Brakes are so under rated ... excellent job on showing and explaining all the pitfalls and tips n tricks to do the job right the first time.

  • @craigriedel4688
    @craigriedel46882 жыл бұрын

    Great video! Love the detail and and explanations of things. Decided to stop being lazy and just did my own brakes for the first time after watching your video several times to make sure I understood things. Could not have asked for better instruction on the whole procedure. Thank you so much for this!

  • @markp4967
    @markp49674 жыл бұрын

    that brake job was a pain, and all I did was WATCH! good job!

  • @budsodalsky
    @budsodalsky3 жыл бұрын

    You are a natural for youtube! Very good help for me to finish my 2014 Grand Caravan! Rotors rusted on for me so I came in and quit!

  • @gizmoflyslow9854
    @gizmoflyslow9854 Жыл бұрын

    This guy is great! I used to watch his Ford repair videos when I had an F-150. Excellent source of info!

  • @user-fm1oc8wc7x
    @user-fm1oc8wc7x Жыл бұрын

    This is truly the best instructional auto video I've ever seen! This guy is the bomb. I consider myself a long term gear head, but need help on the newer models. You, sir, have given me all the confidence I need. Sure hope I can continue to find you when I tackle new projects in the future. Appreciate you! Mike

  • @cbielman1
    @cbielman12 жыл бұрын

    Excellent tutorial. Glad to see the finer explanations, like the nub on rear brake piston and the importance on lining it up.

  • @STLkev1
    @STLkev13 жыл бұрын

    Nothing like the brake job I used to do on my Taurus. I Could not have done the brake job on my Grand Caravan without your help. Thank you! Thank you! Thank you!

  • @elpresidentetx
    @elpresidentetx3 жыл бұрын

    Much success on your new channel! Thank you for all the great information you provide👍

  • @billmuggelberg8418
    @billmuggelberg84184 ай бұрын

    Just found your YT channel. I've only watched the one video so far, but plan to continue watching as I need to do repairs on my van in the future. Great communication by the tech. He explained it well. I've been working on my own vehicles for my whole life and the tech makes it easy to follow for others that don't know what's going on. Great job sir.

  • @GS-lh2nx
    @GS-lh2nx2 жыл бұрын

    I have enjoyed your videos but since I don't own a Ford I never thought I would actually need one. Imagine my surprise to find you working on a Mopar. Thank you it was exactly the info I needed and done very well

  • @richie-rich3035
    @richie-rich3035 Жыл бұрын

    I really appreciated watching your video. I am semi knowledgeable of this type of work. Your instructions and the patience you displayed really encourages me to tackle this job. Again, thank you very much and I appreciate your knowledge!

  • @Santiago-je5ki
    @Santiago-je5ki2 жыл бұрын

    Dang it, i wished i watched this yesterday before doing a friends rear rotors and pads. You made it look too easy. It took me 3hrs to do both rears, everything was seized. Great video.

  • @raulvasquez3368
    @raulvasquez336810 ай бұрын

    Thank you very much for this tutorial. This is the best example of how brakes should be done. BSG is truly top notch.

  • @allyssajohnson3845
    @allyssajohnson3845 Жыл бұрын

    Thank you! Just changed my brakes and rotors for the 1st time and your video made it a much easier process!

  • @marianav7325
    @marianav73252 жыл бұрын

    Excellent video. Best detailed and concise commentary on the process. Learned a lot and got the job done. Thank you sir.

  • @stevenhauser8089
    @stevenhauser80893 жыл бұрын

    This is the best brake video I have seen, very through and neat, Thank you sir.......

  • @stevebaker1611
    @stevebaker16113 жыл бұрын

    Great video, As a amateur mechanic I always had trouble with the clips but this video really helped, Thank you.

  • @jackdenial-qm9dc
    @jackdenial-qm9dc3 жыл бұрын

    Great job with the video, teaching detail, and reasoning. I enjoyed it and learn a great deal. Keep up the good work.

  • @downtown843
    @downtown8435 ай бұрын

    Just used this video tonight to solve a similar issue with the lower pin binding. Saved me a ton of time!

  • @Tyler-ec5bz
    @Tyler-ec5bz11 ай бұрын

    Great detail, lighting, explaining multiple methods to remove things, etc. fantastic instructional video.

  • @christophercoupe5006
    @christophercoupe5006 Жыл бұрын

    This lad must be a real mechanic because none of the shade tree guys talk about lining up the inner pad pin with the piston slot!!! I learned the hard way by ruining 2 sets of rotors how important this is. Best video on this subject!!!

  • @jpm1211
    @jpm12114 жыл бұрын

    Cleaning brush jag for a 20 gauge shotgun barrel looks like it would be a perfect fit for reaming out the gunk in there. Great tips as always!

  • @hawaiianpunchoner
    @hawaiianpunchoner Жыл бұрын

    GREAT JOB... seems like you did it the way it's supposed to be done makes me wonder if other mechanics pay this much attention to detail.

  • @scottc1008
    @scottc1008 Жыл бұрын

    Nicely done! You provided lots of details for doing the job that included troubleshooting along with future preventative steps as well. 2 THUMBS UP!

  • @marklk8787
    @marklk8787 Жыл бұрын

    Absolutely the best brake video for my van! Thank you!

  • @fisherman889
    @fisherman88924 күн бұрын

    Getting ready to replace rear pads and rotors on my 2009 Town & Country. So I decided to see if I could find any valuable tips on doing this on KZread U. before I start. The first video I watched less than a third of it and being somewhat of a motor-head, decided to quit as it wasn't much help. Yours was the second, and I went no further. Let me say this, you ARE a teacher my friend, the was video perfect! I really appreciated how you treated the caliper pins and your method to free them up if they get stubborn, freeing up the piston boot with a pick tool if it is binding to it, lubricants used and finally the details of lining up the slots on the piston with the pins on the pad back plate. Many Thanks..see you again.

  • @jrumlr
    @jrumlr4 жыл бұрын

    great video. thank you for all your hard work. love your videos.

  • @randycornwall6393
    @randycornwall63933 жыл бұрын

    Very Thorough better than most videos thanks

  • @stuckinpickle291
    @stuckinpickle2912 жыл бұрын

    This was awesome. Really really great explanations. Great directions

  • @CMNTMXR57
    @CMNTMXR573 жыл бұрын

    Came looking for the torque specs as I have to do the rears on our '15 again, glad to see that you had the same issue with the guide pins that I had the last time I did the rears (the passenger side was locked up that time). Learning from that, I just ordered a new bracket and guide pins premptively as I believe that's the problem with the drivers rear this time.

  • @xsosdid
    @xsosdid3 жыл бұрын

    best detail of any video I've watched.

  • @richardkhan2076
    @richardkhan2076 Жыл бұрын

    Very thorough video Great for DIY techs. Thanks for taking the time.

  • @dfazzini
    @dfazzini3 жыл бұрын

    Thank you for the great video. Made the job so much easier.

  • @roymeredith204
    @roymeredith2042 жыл бұрын

    one of the best . great instructions and video

  • @kevindaniels9390
    @kevindaniels93903 жыл бұрын

    Very informative and excellent walk through. 5stars

  • @bradclifford2399
    @bradclifford23993 жыл бұрын

    Semper Fi! Brother, thanks for the information!

  • @donaldballasch5619
    @donaldballasch56193 жыл бұрын

    Great video. Learned what I need to know the easy way.

  • @carlosvargasgamboa6634
    @carlosvargasgamboa66344 ай бұрын

    Great video awesome tutorial with all important details. 👍

  • @vasiledolhescu2851
    @vasiledolhescu2851 Жыл бұрын

    Great video.Please keep posting.

  • @MarkQuinnelly
    @MarkQuinnelly3 жыл бұрын

    This is a great video! Thank you!

  • @carljenkins5092
    @carljenkins5092 Жыл бұрын

    Great video. Thank you so much for all the information it is a huge help.

  • @randymarko486
    @randymarko48611 ай бұрын

    You ROCK ...... BEST "How Too" vide on KZread.

  • @MrMattNelsen
    @MrMattNelsen2 жыл бұрын

    wish I could give you more than one thumbs up! great job

  • @emcet9546
    @emcet95463 ай бұрын

    Cleaning the pin was great loved the technique to save the old part

  • @shith00k
    @shith00k Жыл бұрын

    Excellent video! Thanks!

  • @Just2362
    @Just23624 жыл бұрын

    Good Stuff as always

  • @ahamil3
    @ahamil32 жыл бұрын

    Thank you, thank you, thank you. The vid is very well done with much attention to detail. You saved me hundreds $$

  • @-DC-
    @-DC-4 жыл бұрын

    Superb content really appreciate the time and effort you take over your channel 👊

  • @bruceclaxton5721
    @bruceclaxton57212 жыл бұрын

    Most Excellent Video.....Didn't miss a thing, Thank You:-)

  • @alyssadoering1429
    @alyssadoering14292 жыл бұрын

    This is great. Our caliper bolts won’t come loose for anything though 😅 It’s definitely throwing a wrench in the repair.

  • @Lukas-wl4oj
    @Lukas-wl4oj Жыл бұрын

    Thank you, helpful video. Greetings from Europe

  • @DilipNandiUS
    @DilipNandiUS3 жыл бұрын

    Excellent video!

  • @yogavan
    @yogavan3 жыл бұрын

    Really good work, thanks!

  • @christakonis325
    @christakonis3254 ай бұрын

    Thank you! Great video!

  • @countryside8122
    @countryside81223 жыл бұрын

    On 2011 town and country those warning tabs were on the back side of the brakes. It was the first brake job on it as well. I should say low pad warning tab. Also had a problem getting one of those clips for the pad guide installed. The back would pop up every time I started putting the new pad in.

  • @Johnnyledwards
    @Johnnyledwards3 жыл бұрын

    Thank You! Great Video.

  • @drkar4656
    @drkar46563 жыл бұрын

    Thanks for making this vid. Good tip to try to free up a stuck caliper pin by spinning with the bolt while secured in a vise. But just why-o-why did Mother Mopar have one pin with the rubber and the other one without? Also a good tip on using a silicone brake grease so that said rubber on that caliper pin does NOT swell up.

  • @hectorquinones4824
    @hectorquinones48243 жыл бұрын

    Great jpb. Thankyou very much

  • @alainpatient9647
    @alainpatient96473 жыл бұрын

    Yes this is really good brakes vidéo!

  • @papabits5721
    @papabits57213 жыл бұрын

    Is a little easier to install the pads when there in the vice, especially when you're working in the driveway. Great video

  • @treborhi
    @treborhi2 жыл бұрын

    Concerning the discussion starting at 31:32 about the nubs on the back of the brake pad. What the purpose is of that little nub? Does it come into play when engaging the parking brake? Great video, was all set to do this job and then it turned out I had a stuck lug nut. The tire shop touched it last and apparently cross-threaded with an impact wrench. Since, I needed help getting the wheel stud replaced, I had the shop do the rear brakes while they were at it. Heard the shop guys talking about grinding the nub off...

  • @Bobcagon
    @Bobcagon Жыл бұрын

    Over torquing wheel nuts does two things. 1. Wallows out the stud hole in the wheel. 2.Over Stretches the stud thus wearing its strength. The third thing which is more of a pain is it makes harder to remove the wheel nut with the proper tool.

  • @GotWire
    @GotWire4 жыл бұрын

    Eric o from south main auto is a pro when it comes to caliper slide pins getting stuck haha love your video tho good tips!!!

  • @BSGAutomotive

    @BSGAutomotive

    4 жыл бұрын

    Yeah I couldn’t handle the amount of rust he has to deal with out there.

  • @ggarciacota
    @ggarciacota2 жыл бұрын

    Great video thank you!!

  • @moonbounce
    @moonbounce4 жыл бұрын

    Good Show!

  • @plmn93
    @plmn93 Жыл бұрын

    The alignment explains why my old pads wore funny. New pads don't have that tab so it wouldn't seem to matter. They are decent quality Wagner TCs, so hopefully that doesn't have negative effects.

  • @reynoldvalle
    @reynoldvalle2 жыл бұрын

    Nicely done

  • @stevek8458
    @stevek845814 күн бұрын

    Great video THANKS

  • @Ken_Domik
    @Ken_Domik Жыл бұрын

    Thanks for the video

  • @rhancesk
    @rhancesk2 жыл бұрын

    good job, thanks for sharing the video and also for not putting music in the background. work sound better.

  • @Saint696Anger
    @Saint696Anger3 жыл бұрын

    I have an additional bracket holding the brake line together in the 2008 model, hard getting it off I'm gonna need to get a longer breaker bar

  • @bearvollmer9761
    @bearvollmer97614 ай бұрын

    Good video thanks

  • @LubaLuba1
    @LubaLuba12 жыл бұрын

    How can I check if my rear calipers are working i need to see if both pads are moving on the rotor? I had both brakes replaced but I still get a slight shim feel when i brake and I know its the rear because when I hit the e brake only i get the same thing.

  • @Aspire2Cycle
    @Aspire2Cycle2 жыл бұрын

    How do I know what size roter I have? I see two different sizes listed for my van. Did I need to remove the wheel to measure the roter or can they go by my VIN?

  • @Paul1958R
    @Paul1958R4 жыл бұрын

    Brian, Great video - thank you! Im not a Mopar guy but I am a BSG/FordTechMakuloco guy! BTW Ive always used a bit of Permatex anti-seize on my wheel stud threads to prevent rust seizing which is common in the northeast. God bless Paul (in MA)

  • @BobSmith-mc7uq

    @BobSmith-mc7uq

    Жыл бұрын

    Absolutely. Very thin coating rubbed in with a cloth keeps the lug nuts removable. Been doing it that way for 50 plus years. I also anti seize the caliper bolts & caliper bracket bolts the same way. Never had an issue with a loose bolt. To each their own.

  • @Reignz
    @Reignz Жыл бұрын

    good video

  • @yurikovalchiuk9793
    @yurikovalchiuk97932 жыл бұрын

    Very good!!!

  • @Steveh112
    @Steveh11211 ай бұрын

    I can't get the rotor off, pounded on it like you did for almost an hour, sprayed PB Blaster around the center hub and inside the holes around the studs and I can't budge it. Please let me know if you have any suggestions for getting it loose. Thanks

  • @GabolovesPam
    @GabolovesPam3 жыл бұрын

    You did that way better then I did I may have re do my brakes

  • @dougjstl1
    @dougjstl19 ай бұрын

    I guess you could be a movie star you got the making the faces and everything

  • @marcin495
    @marcin4952 жыл бұрын

    I have a 2012 Town & Country and the brakes keep wearing out after about a year (less than 10k miles). Are there any particular brakes you recommend for this car so that the brakes last longer?

  • @FrancisRoy
    @FrancisRoy Жыл бұрын

    Thanks so much

  • @keithb6307
    @keithb63072 жыл бұрын

    The video (2008-2020) showed the rear pads being installed with the wear indicators at the bottom of the pad. However, my 2015 Grand Caravan 3.6 liter vvt apparently requires the wear indicators to be on top, for all 4 wheels. Any comment?

  • @tonyb282
    @tonyb2822 жыл бұрын

    Hi, I have a 2017 dodge grand caravan. I have had my front rotors turned and replaced several times. The owner of the shop said the front rotors are notorious for warping. The rotors ate less than a year old and I just had them turned last week before going on a trip. I drove 800 miles and the vehicle started shaking while going down steep hills. I was actually very careful this trip and didn't ride the breaker at all. During the last repair the mechanic stated that the only way to permanently fix this problembis to buy cold forged breaks and that they are super expensive. Does this sound right? Thanks for your help.

  • @nashjarwa4347
    @nashjarwa43472 жыл бұрын

    thanks ,,,,,ur the best

  • @chrisbrannan3784
    @chrisbrannan37842 жыл бұрын

    Last time I did the brakes on my 2010 t&c,. The boots twisted and tore. Had to get both rear calipers replaced. I am due for new pads again. What can I do to keep the boots from spinning with the piston and ripping? Probably not enough pressure pushing in, or is that just something that happens eventually given they were the original calipers and I live in the rust belt? Ive done tons of brake jobs on various vehicles, but rarely on the screw type calipers. Needless to say a felt like an real dummy when I tore both and would like to avoid this go around.

  • @bigoxforexx3054
    @bigoxforexx30543 жыл бұрын

    Great video. Helped me a lot. Quick question. How important is the rubber on the stuck guide pins? They were shredded by the time I got them out. What a pain. Also without a vise...

  • @BSGAutomotive

    @BSGAutomotive

    3 жыл бұрын

    It is not absolutely necessary.

  • @bigoxforexx3054

    @bigoxforexx3054

    3 жыл бұрын

    @@BSGAutomotive thank you. I do feel that the guard bracket may hold snow and ice on it which could make it's way into the rubber shelve. Just a thought i had while changing. All other pins were good.

  • @user-nb8ye1zi2k
    @user-nb8ye1zi2k6 ай бұрын

    can i use 1/2 copper fitting brush to clean inside the bore? would that damage anything?

  • @awebuser5914
    @awebuser59142 жыл бұрын

    I'm puzzled why there are threads on the middle of the tool? Does the tool "push" the piston in any way, or does it simply turn the piston? Seems that you could simply have a supported shaft with the round drive-plate and wind the piston in. Maybe the middle threads keep the round plate in contact with the piston, but wouldn't you need to have exactly the same pitch of thread in both the tool and caliper (distance moved per turn...)?

  • @MrLamu8080
    @MrLamu80803 жыл бұрын

    My brackets didn’t fit when I put the pads back on. Does it really needs those anti rattle brackets??

  • @stevenfrederickson5002
    @stevenfrederickson50022 жыл бұрын

    I can't find the anti rattle clips anywhere. Do you have a part number?

  • @johnshannon9
    @johnshannon93 жыл бұрын

    Very informative video that I watched as I'm undertaking a reader brake job on our 2013 T&C tomorrow. Thanks for the great info! After you started using the impact and soft faced hammer, I couldn't help but wonder why your eye protection remained on top of your head instead of where it might be needed? 🤷‍♂️

  • @BobSmith-mc7uq

    @BobSmith-mc7uq

    Жыл бұрын

    lol

  • @ericedwards5125
    @ericedwards51253 жыл бұрын

    Please add a comment or video addressing the parking cable!

  • @nicfriesz2902
    @nicfriesz2902 Жыл бұрын

    Do both of the rear calipers rewind the same direction?

  • @BrandonMagnuson79
    @BrandonMagnuson794 жыл бұрын

    Great video, thanks alot!

Келесі