After 2 years. Doing another lift on my wife’s truck. This is still the best how to video!

Man!! I just love your Videos. Just bought a White 2021 Trail Boss with 5.3l and you wont believe how helpful your Videos are. Thank You!!!

Another incredible (and in depth) video!! Love how 2.0 is coming along!! 👍

Just got my trailboss with the 6.2 and it doesn't disappoint! The motor is strong 💪 Great video, very informative

@campbell0162

3 жыл бұрын

Congrats. Hopefully yours doesn't develope a lifter tick like lmf's truck did

Super informative video. Done like a true professional. Looks great Chase. Good job!

This is actually the best video I have seen so far great job

Love watching your videos between you and Lone Star Hawaiian ya’ll gives me so many ideas for my 2019 Trailboss!!!

@nathanbuck81

3 жыл бұрын

Well said

@IG_Gh0st3

2 жыл бұрын

YEAH THESE TWO GUYS REALLY GIVE YOU AMBITION AND MOTIVATION. SUPER TRILL!!!

Great new look!! Just what it needed.

Holy crap that looks so much better. I have not been a huge fan of the new body style until this! Now to convince the wife

I'm ordering that kit now, Great instructions!

I definitely recommend ReadyLift. I also did a 1.75" leveling kit on top of my already 2" longer front struts from factory 21 Trail Boss. Now it sits 100% leveled front and rear. It looks amazing, and it rides so smooth with the new upper control arms.

@evelyn201

Жыл бұрын

so you can get a leveling kit that will just raise the front for the trail boss? What brand please?

@BigLou19

Жыл бұрын

@@evelyn201 Ready Lift Leveling Kit 1.75” SKU 66-3921 (I just ordered mine yesterday.)

@dcving1two3

Жыл бұрын

Are any of you seeing the left rear of the truck sagging lower than the right rear. After getting my lift installed, I measured the right to be 1 inch higher. Super frustrating to see.

I’ve been waiting for this video looks sick!

I enjoy watching video like this since I’m handy myself, and this one is decently done..there’s something called specs for the torque of everything and reason is otherwise all the bushing will just wear out faster, one more hint would be to tight the upper control once you have tire on and it’s lowered to the ground so that also it’s bushing don’t go through much effort, what happen is you tight them then put tires on and every time you drive it moves and stretch the bushing that are rubbing in there..i just bought a 2022 3.0 duramax , traded my ram 1500 for it which i used to have a 2.5” level installed myself.. I’m contemplating keeping this one stock even tho it’s hard to accomplish LOL..congrats on the video !

I put this same lift on my Trailboss back in March. Front and rear install and alignment took me about three hours. Price of cake. Very nice quality parts too…

@davidscott4849

3 жыл бұрын

Don’t forget to grease the upper ball joints….

I did 2 2021 f150s..ready lift has great instructions

Great job on the video and install. Now you just need to reinstall the rear blocks and bring that back end up a touch.

Looks good all u need is the tow mirrors and she look really good

Perfect, that was the video I was looking gor to do this and how difficult it will be.

Great video ..my son is getting ready to lift his 1500 n it seems pretty easy truck looks hella nice 👌

Awesome video! Very clear. Thanks!

Love the videos buddy keep it up

I can't hate . That bowtie looks tough 💪🏻

Looking good man!

Bro!! Looks bad ass!!! 💯🤙

Great videos! Love the set up. Could you please post what running boards you have on this set up or if anyone knows? Like the clean sleek look.

4500 miles on my 2021 5.3...had to take a trip to the DR yesterday due to CEL and engine misfires...super sick!

@adamdover3783

3 жыл бұрын

What’s the problem with it?

Looks Amazing !!!

Looks awesome man!!!

Nice! I got same SST kit but I'm sure they don't make 4", unless it's different for chevy but for ford it's 3.5". Anyways. In next few days, check again for the height because once it settles it'll come down a little which it wont make much difference. Soon, you might even want to go for 6 or 7" lift.

It’s looks so good I want one now 😅

Impressive work

Really sets it off.

Rock. Awesome truck

Maybe stupid question but with this being suspension components are you not worried about any torque specs?

What a hot truck!!!!!!

Early Gang love the vids man!!

I honestly would recommend washing and touching up the paint in the mount are of the frame while you have the strut off. Rust happens. And I'd consider cutting that rubber skirt off the shaft of the strut and put a typical off road boot on. They're better for keeping it clean.

Nice sweet truck

Looking good! Can't wait to do a 6" on my LTZ.

Me sitting here waiting for the next video title to say I put 2inch drop shakels on my trail boss lol love the vids

Absolutely beautiful truck!

standing proud! that is an awesome look! congratz!

LOVE IT!!

looks great, did you install the rear blocks to achieve the level look? can you do a vid on that as a footnote? will you be getting an alignment just to see how off it is? great vid of the honeymoon. Marco Island is a great place.

@lmfscrew

3 жыл бұрын

Will be doing those in future video👍🏻

That looks great that’s papa squat 😃

Looks good man

Holy shit that looks good

Can’t believe those stock upper control arms are even put on a truck like that.

Hey so I’m looking to upgrade my lift from blocks to an actual lift. Can I just change the shocks with the block and leave the rest or do you recommend a completely new lift kit

Specs on your wheels and tires buddy? Any trimming done? TIA Amazing video man👍🏻👍🏻👍🏻

Funny part is that I've used a spring compressor many times and for some reason It's so scary to watch lol 😆

Can you make a video about the warranty if it voids it or not

So when you did the front leveling kit and you reinstalled the factory lift block for the rear I’m assuming? No rubbing from the 22x12 with 33 tire?

What’s does your hats flag stand for? Great video, great truck.

Esta chincon tus videos amigos %%%🎉puro experto

Nice Truck Brother!! Hey what size wheels and tires you put on after your readylift was installed?

Hey man. Question. Why didn’t you leave on the 35 recons you had? Did they give you rubbing issues prior to putting on your lift? I noticed you put those on but when you went to do the lift the 33s were back on. Thanks man!

Great stuff. Just subbed.

Well done

How’s the kit holding up?thinking about getting it for my custom trail boss!

Does the rear need an additional inch?

Looks sick!! Is it still all the same for the sierra at4? Just wondering if there's any difference in the installation.

@lmfscrew

3 жыл бұрын

Should be the same

does yours have a bouncing feeling to it? I noticed after I installed mine (torqued everything to spec and alignment completed) it feels as if the front wheels bounce on sharp/ quick bumps on the road.

What size tires are you running with this? Also what’s the measurement from ground to the fender? Curious to know how much this lifts over stock.

Does the ride get "pogo-y" like it can with leveling spacers? Or feel pretty close to stock

Beautiful truck, what exhaust are you runnin?

I just ordered the Readylift SST for my 2019 Trail Boss. I have 295/70R18 Toyo Open Country MTs coming in. I read that they will fit with no rubbing on the factory wheels, which I like. I'm going to use thee 3" blocks that come with the kit. I need to have a tad bit of rake for towing my boat and for the 500 lbs of bags of sand that I keep in the bed during winter. Also, my wife bought me the RC high clearance front bumper that comes with LED lights and RC side steps.

@Livin_Easy

2 жыл бұрын

We're you able to fit those Toyos on the stock 2" lift without rubbing? I have AT4 and thinking something similar

Nice video clear .

looks great man! I May go with the incognito kit for mine, want to keep the auto 4wd function.

@MrPAULONEAL

3 жыл бұрын

Cognito's leveling kit uses Fox shocks and coilovers.

@MrPAULONEAL

3 жыл бұрын

Chevrolet has a leveling kit for the Silverado.

@KnightsGarage

3 жыл бұрын

@@MrPAULONEAL Only if you choose that option they have another option that has the upper control arm and a spacer. Plan on going with Bilstein shocks and struts.

@carpentrycoach2204

3 жыл бұрын

Thanks for the video. It helped. The instructions that came with kit are pretty good also. Did this SST kit yesterday on my AT4 and after some driving my net gain is 1 3/4”. I didn’t bother raising the back as the top of wheel well in back is still higher by 3/4”. Still haven’t decided what wheel/tire size I’m going to go with. Like the 4Play 4P70 rims. Would like to squeeze 35” rubber if I can get the right offset and minor modifications with mud flap delete and inner fender well.

That sensor wire doing more work holding the spindle than the ratchet strap

Put pressure on that UCA with a pry bar and that ball joint won’t spin 😉

looks really good man just one thing id do is take running boards off!

@AlexLopez-ld1rx

3 жыл бұрын

Fr that’d be clean

@lmfscrew

3 жыл бұрын

They keep the rock chips away

@brentunderwood7600

3 жыл бұрын

@@lmfscrew true didnt think about that

@kelvinthomas9161

2 жыл бұрын

I actually like the running boards looks and catching the rock chippers is ithe decision maker

Where do you live?? Love all the background in your vids.

I just got mine done, damn control arm is close to my tire. It’s not rubbing but I can’t even slip a finger between em.

I used the same stock bolt from the upper control arm. The supplied nut would make the ball joint turn. Did you ever isntall the supplied nut after

Have you thought about painting the tow hooks white or leave them red 🤔

Does it need an alignment after kit installation?

I'm surprised the lift kit didn't come with diff spacers for correct CV angle.

I did a 4 inch ready lift wich is the same control arms ans spacer blocks I just want to comment that I came a cross an issue with the rear ubolts the where to long I didn't have a socket long enough to tightened all the way down so I had to cut them about "1,1/2" also I went with 35x12.5r20 on stock rins toyo open country mt I had to space it 2 inches 1,1/4 is enough but you have to cut the wheel studs

Do you still have the rear block out with the 2 inch rear drop shackle ?

With the full 2” SST kit front and back will it fit in a standard garage and how does it ride compared to stock

Damnnmm! That is sweet! How much for the kit and from where? Did your truck already have a factory lift? I might have missed that part.

@leir2005

2 жыл бұрын

The Trail Bosses are lifted two inches from the factory. Also you find the kit pretty much anywhere. EBay, Amazon, etc, etc

we needa see some more of earl

Good day when you post

Does the 4 wheel drive auto still work?

let’s gooooo

dale yeah bo, lean that bit

Everyone gets a white Trail Boss but honestly the torch red color looks best on trail boss

@Review-This

3 жыл бұрын

I love my torch red Trail Boss all blacked out. But want to add this lift now.

@mikeanthony976

3 жыл бұрын

Agreed, I just got my red hot 6.2 boss. Its absolutely beautiful

Did you add the rear blocks?

Do you have to move the driver side airbox to takeoff the strut?

Man I really don't like a Carolina Squat, rear rake all day long. However I appreciate everyone having their own interest, so enjoy.

I think they changed this kit so you no longer have to disassemble the strut. It uses a spacer on the bottom control arm mounting point as well as the spacer at the top.

@S0flosilver

2 ай бұрын

No the one you’re thinking of is the 1.75 leveling kit. The 2.0 is as in the video

did your truck come with the black front and back bumper?

With those control arms does the ball joint have angle?

Is this the sst 2.0, did you do the rear? Or that is the stock rear.

Hi Look.good !!!! does the 4x4 high or low vibrate at high speed ?

What wheel size is that at the beginning of the video

Did you by chance end up wondering if your abs light was going to kick on or not? Lol I take everything sensors off now, no matter what. Cheaper than parts run to the dealer

I don’t wanna watch the whole video but does this lift require any cutting, permanent change from factory?

Yessier we just need the blocks removed and we in there