First class work!

Man, I could have used this in 1994 when I put one of these together..... I will be working on the same project bike this winter replacing the crank that it needed in 1994.

@jh-tech5546

9 ай бұрын

Good luck and enjoy it.

4l1 250 casing with 4l0 350 top end. Very nice job you did.

Thank you for sharing. I'm hopefully going to be putting my newly acquired rd350 motor together and this video has been a great help thanks again

@jh-tech5546

2 жыл бұрын

Thank you. Have fun on your RD and take your time.

Clean rebuild. Hatsoff.

Great stuff, busy stripping a 1973 rd350 American import, gonna check everything once the crankcase are separated, thanks for sharing your knowledge.

@jh-tech5546

Жыл бұрын

Thank you. Have fun on your RD!

Good work and im ready to share your neat work and full support for your channel from my side

Hoe super cool is dit....:-)

Top !

Muito bom

Buenas noches hablo desde medellín Colombia

video looked great..would love if you had audio of doing work

Nice to see an LC engine without the numbers filed off :/

@jh-tech5546

2 жыл бұрын

Unfortunately not matching with the frame. But the bike looks and rides as good so not a big problem :)

Cómo puedo conseguir repuestos para una RD250 GRACIAS

Hi nice video! Do you know if it is the same approach and parts to the 31K ypvs models? //Kind regards Klas

@jh-tech5546

2 жыл бұрын

Thanks for your comment! Yes I think it is pretty similar. Apart form the clutch actuation and the top end.

Great video. 5:24 why was only one side given a semicircular strip seal ?

@stevew6031

2 жыл бұрын

It's not a seal, it's a bearing locator/retainer. It fits in a groove in the bearing & lower crankcase.

Hey man! Just got a RD250 which needs some small work but i have no idea where to buy parts for it.. So I was just wondering if you could recommend any website where I could buy parts. Thanks!

@jh-tech5546

3 жыл бұрын

Hi, I bought original parts at www.cmsnl.com, and some other parts at yambits.co.uk, www.pjme.co.uk and www.rdlccrazy.co.uk

Hello, what kind of glue do you use to secure the screws? Thank you for answer.

@vinm300

2 жыл бұрын

I would guess Hermetite. It comes in many colours : for alternator bolts I used Red Hermetite. For minor fixings I would use purple.

@user-kc1qk7hv1y

2 жыл бұрын

@@vinm300 Thanks. Great video about the complete assembly of the engine !! I will completely assemble the engine and the motorcycle and I am thinking about what glue I will use to secure the screws so that they do not come loose. I bought an adhesive from the LOCTITE 243 brand. Loctite offers 3 types of adhesives. With low, medium and high strength.

Is the gray sealant you used to seal the engine silicone or anaerobic? Do you put thread locking sealant on the crankcase bolts?

@jh-tech5546

3 жыл бұрын

I don't realy know if i's anaerobic but it's not silicone based for sure. No, i did't put thread lock on the canckcase bolts.

@robertosansoni4421

3 жыл бұрын

@@jh-tech5546 What brand of sealant do you use?

@robertosansoni4421

3 жыл бұрын

@@jh-tech5546 For the engine of the 2UA I used the red sealant, I must say that after more than three years nothing has happened.

some of rd have 4 shifter forks, is there another model?

@jh-tech5546

Ай бұрын

Sorry, I don't know of any model with 4 forks. Maybe older RD air cooled model?

Parts from where? Time Machine back to 1975?

@jh-tech5546

3 ай бұрын

Mainly YAMBITS and CMS NL

The important bit is not showing on this video lining up the 4 tits on the crank bearing to the housing if you don't get this right your end up with cracked bearing many people have

@jh-tech5546

5 ай бұрын

Correct. Thanks for the comment