Im new and this is by far the best channel for newbies thanks so much if it wasnt for people like you i would not be in this hobby

So informative as always, I learn so much from watching your videos. Thanks for sharing your knowledge!

Wow I always kept my throttle rate in the middle!! I'm going to turn it up tomorrow and see how my Typhon 3s performs. I've only been in the hobby a few months. Thanks for the info!!

I adjust throttle DR all the time in the field cause it's the fastest way to stop a trigger happy finger from too many wheelies, when I have a bit more time I might adjust the EXPO. Awesome stuff !!

Always like your info as you can always take something away and inprove😊😊😊

Simply the best AJ!

YOU HAVE GREAT VIDEOS BUD 👍 NEW SUBSCRIBER!!!!!!!!!! 😁🤙🤙🤙🤙🤙🤙🤙🤙🤙

Could you do the Radiomaster MT12?

I thought U can set end points to prevent servo binding ?

@AJJAMStudios

6 ай бұрын

We do.

Cut off percent 🤔 what it's use for

And any part sensor avoid crush ....

😮 o...throttle speed percent switch

@AJJAMStudios

Жыл бұрын

It limits the speed of the vehicle. Good for training someone new.

@bonniebonnie4499

Жыл бұрын

Bonnie view traxxas bluetooth link 😶maybe also have,don't know where have hiding has

What’s the difference between dual rates & EPA?

@AJJAMStudios

3 күн бұрын

Dual rate adjusts the end points but together and it affects the power curve as well. EPA can adjust individually for each side but I don’t think it affects the power curve. I could be a little off on the power curve part. With dual rate, on the throttle side, slows the vehicle as you turn it down and lightens the brakes at the same time (power curve). EPA sets the stopping point for the servo.

Get a better radio then tweak your EPA then you can lock in your DR if you need

How do I find the sweet spot in throttle trim. All the way up rc runs away. All the way down in runs in reverse. I'm new to rc and it run away under my car during testing 😂 FTX Ramraider 🇬🇧

@Outtacontrolcreations

Жыл бұрын

That’s throttle trim think of it as cruise control end points are different

@crawlintime2837

Жыл бұрын

Depending on the car, I keep mine in the middle or a little towards forward, just enough so it won't "creep" forward.

@chrisvda7277

Жыл бұрын

@Street Supreme RC By setting it about 20% or 80% what's the difference. Are breaks harder at 20% and less at 80%. Does 20% effect top speed. I don't completely understand the point of it. Why does it 100% make it run away.

@linh811

Жыл бұрын

@@chrisvda7277 you're adjusting trim, not DR. If you're using an RTR radio, it may not even have DR.

@chrisvda7277

Жыл бұрын

@Linh Nguyen I know I'm adjusting TRIM not Duel rate. But what is the purpose of trim. Does it affect top speed or breaks.

Pretty much endpoint adjustment ??

@AJJAMStudios

11 ай бұрын

Yes

The 50/75/100% switch is not needed because of the "duel rate"? Now I have a typhon 6s that will do 70mph. So when I give my 12 year old son the controller I should use the "duel rate" to turn it down to 50% but also give him 50% less braking force? I prefer my son when he's learning to have 50% throttle with 100% braking force. That's what the switch is for. Don't become a driving instructor 🤣. Now we are only doing 50% of the speed limit today so I've removed 50% of your brake fluid and pedal travel 👍