Ouch! Don't use pliers on the shaft. Use side cutters on the tip of the thread to avoid scratching the shaft. That would damage the oring in the long run. Smoothness of the shaft to oring is king.

@HoodPJRC

2 жыл бұрын

Thanks for the tips. Really appreciate it. 🤩

simple and easy to diy.Thanks for sharing .

Cool interesting video, excellent work my friend!)🤩💥💯👍👏

I just did the same exact thing to a set of cheap internal spring shocks, the cool thing about these friction shocks you can quickly swap different springs without getting oil everywhere.

@jweatherly26

Жыл бұрын

One thing to note, the shocks i got are listed as longer length than they actually are. To get 100mm shocks, they were sold as 112mm

Mantap atas perkongsian

I use pen springs Keeps the body from unloading

@micy80

Жыл бұрын

Did it cure some of the torque twist? The pen springs go inside on the shaft, right?

Nice bro 👍👍😍

@HoodPJRC

3 жыл бұрын

Thanks 😃👍

what if i keep using external spring? does it change something? or should i just use 2 shocks? 1 normal shock and 1 dropshock? need your response. thank you

Nice setting...Make a video how it runs man.

@HoodPJRC

3 жыл бұрын

I will do it as soon as possible

I bought a set from amazon and putting oil in them was useless because the plastic pistons have no holes. Hence, the compression was very hard with oil. I wanted to return them but After watching your video, you inspired me to do the same thing with mine. Their 90mm shocks. Can you please tell me the correct measurement of springs I should use for mine?

@HoodPJRC

2 жыл бұрын

you can use spring with wire diameter of 0.5mm. the diameter of spring should be 6mm. the length of spring is based on your shock length. 😀

kalau tetep pakai per luar gimana? bakal merubah sesuatu gak? atau pakai 2 shock aja? 1nya shock biasa, 1 nya lagi pake drop shock?

Good tips sir...did u fill with oil shock after that,sir?

@HoodPJRC

3 жыл бұрын

currently i did not fill any shock oil. I am planning to fill it in and compare the performance of the shock with and without oil.

This mod converts the shock to internal spring so you do not need the external springs installed correct? Just making sure... Subbed and liked!

@HoodPJRC

2 жыл бұрын

Yes. only internal spring are used

I’m assuming if you wanted it half way sprung you’d just cut the spring in half?

@HoodPJRC

2 жыл бұрын

Yes. 👍

Awesome! Tq for the tips.. Hehe any link for spring? Hehe

@HoodPJRC

3 жыл бұрын

Check out d0.6*D6MM Pressure Spring Release Spring Compressed Spring Return Spring Mechanical Spring Wire Diameter 0.6mm, Outer Diameter 6mm 10PCS for RM17.98. Get it on Shopee now! shopee.com.my/product/172400708/5833651086?smtt=0.6967998-1627205774.9. Sy akan letak kt description

@cRazNocks64

3 жыл бұрын

@@HoodPJRC tqsm! Hehe

@HoodPJRC

3 жыл бұрын

Sy guna 0.5 utk rear. 0.6 utk front

What’s the total length after the modification?

@HoodPJRC

2 жыл бұрын

Its 80mm. The shock origanal length is 110mm

Bang mhu tnya klau absober 90mm brpa ukran spring nya?

@HoodPJRC

2 жыл бұрын

beli je yang paling panjang. then potong ikut kesesuain panjang shock absorber