Please please make a clear tutorial about the steeing link fix, I have a brand new pro brushed version and the link is dislocated very easily on both sides. It is very annoying and I think this is an issue in this car. Thanks

@Fast_Lane_RC

2 ай бұрын

Ok o will do that my friend, i will reply with the link when i have the video done, thanks for watching

@armenberj9158

2 ай бұрын

@rickybeau thanks, I am subscribing and liking this video to keep watching your videos in the future. I appreciate your help .

@Fast_Lane_RC

2 ай бұрын

hello, only today i found the time to do the video, there you go my friend, any question, you kniow where to find me :) kzread.info/dash/bejne/o22a0ZqiksS9Xbw.html

Great video an tips! Well done! 👍

@Fast_Lane_RC

8 күн бұрын

Glad you liked my friend thanks for passing by.

Thanks for the tip on those hood pins! Getting so tired of losing them haha!!

@Fast_Lane_RC

4 ай бұрын

Happy to help! Thanks for the feedback

Thank u for ingenuity. I just bought one and they r great little cars. I will b following u for more tips & tricks. Australia 🇦🇺

@Fast_Lane_RC

3 ай бұрын

Thanks aussie, you re very welcome i already have new upgrades to share soon my friend. Thanks for the feedback i much appreciate it.. its this small things that keep me going with the channel.

This is the most solid and strong cheap 1:16 car I've ever owned and most parts from Wltoys cars fits

@kjetilpedersen583

Ай бұрын

Yes everything on this cars and parts you can use Wltoys and Rapid Beast SG116 Max and 3 different types of The Mjx Hyper Go 🙏 Amazing cars Soo nice to drive 😊

I have the same car it's Amazing fast and New Oile shocks.Its soo much fun to drive thanks for nice video 😊

@Fast_Lane_RC

Ай бұрын

Thanks for the compliment my friend, see you soon.

By the way, the shocks in the video are 80mm long, oem ones are 70mm, can use 70, 74 or 80, this ones i tried and work. I prefer the 80mm ones seems to keep the ride a bit higher and has more tension.

@kuganreddy6921

Ай бұрын

great video but the longer shocks in my case stop the steering from returning properly.Used 1/14 wltoys shocks but removed them after my experience.Also the driveshafts are in too much of an angle and seems to strain the suspension.Think shorter shocks for me is the way to go

@Fast_Lane_RC

29 күн бұрын

@@kuganreddy6921 i dont have any issue like that. In my case when the car is performing the ride height stays just a tad higher, but in the front a shorter one like 0.5cm shorter would works the best, i say 74mm-80mm rear, 74-70mm front, but its preference, works with all three at least in my case, i have metal steering links, not sure if that makes a diference. Thanks for your comment, so wich one did you put in yours? Thanks for watching.

@Fast_Lane_RC

29 күн бұрын

@@kuganreddy6921 you can also shorten the shocks but puting like a clear tubing used in gardening, you open the shock and insert the tubing(the length of the tubing will determine the lenght of the sock shaft) in the shaft from the inside so it limits the travel of the shoxk , and test it till the height is at your liking, this way you can still use this shock you already have its very simple to do, did you got how its done? I hope this helps if you have any doubt answer back i will explain it better or make a video about this.

i broke my shock in half and i ordered new shocks from ali express...i also run it with 3s 25c ,no problem so far

@Fast_Lane_RC

Ай бұрын

Hello my friend thanks for sharing your experience it might help some viewer who reads it, i appreciate that very much.

Hello, Really nice, well detailed and informative vid you posted, Congrats and thank you. I have bought myself the same exact care with most of the upgrade parts. Only issue that I have is connecting the heat sink fan to some power. The fan has 2 pin plug and the extension you provided is with 3. Can you provide a small vid or picture of the part you ordered for the heat sink fan in order to connect it, an url for the part? Thank you in advance!

@Fast_Lane_RC

8 күн бұрын

Hello my fellow subscriber you simply connect the fan to one side of the plug leaving on hole free, dont worry it wont happen nothing if you connect it wrong. Hope i was clear enough if you still have doubt dont hesitate to message me again. Thanks for the support and dont be a stranger.

@cristi-valentinnedelcu9937

8 күн бұрын

@@Fast_Lane_RCAppreciate for your fast reply, Yeah was a noob question from me, tried both ways but didn’t taught to invert the pins. Works now, ty!

@Fast_Lane_RC

8 күн бұрын

@@cristi-valentinnedelcu9937 you re welcome 👊

Hello is there for SG116 MAX a metal spare part nr 6018 for the steering? It broke and now lam trying to fix it with glue.

I have a question. For protection on certain spots like the top and down of the underside car. Is it good to use tin from cans? It is good to fold. And should l use glue or screws to fix it on the bottum?

@Fast_Lane_RC

2 ай бұрын

Hello my felloew subscriber thanks for the question, the tin seems a good ideia, but you can also use some kind of thick plastic, and yes you have to put screws to hold it in place glue i suppose it ends to degrade fast. Hope i could help, thanks for watching.

Is there a way to swap out the front, center, back drive shafts, spur gears, drive pinions, differentials for something maybe more universal and easier to replace?

@Fast_Lane_RC

11 күн бұрын

Hello my fellow subscriber, there is nothing universal the pitch amd or mod has to be the same between gears, in sg116max its used mod 0.6 on spur and pinion the other gears should be the same. Its not hard to find .6 mod gears for cheap you dont have to buy feom the rc car sellers, just have to buy the same mod and teeth count. To change for other pinion you have to adjust the motor mount and this rc doesnt have a changeable motor mount, lots of rc dont. Hipe i help you and answered your question. Thanks for watching and dont be a stranger.

@rarebanana

9 күн бұрын

You've been a lot of help. Well, I'm having some horrible cogging issues on the scy 16101. I put new differentials, a new motor and the thing still cogs. Idk what the hell is up with this crap. I'm not sure if it could be the ESC? Fruatrating! Lmao 😅🤣 any idea what it could be? ​@@Fast_Lane_RC

@rarebanana

9 күн бұрын

@@Fast_Lane_RC hmmmm, I'm thinking it may be the ESC but you're input is appreciated. Will upgrade the ESC and get a new receiver and transmitter 🤘🏼

I have a small question they Promote it with a Range of 300m. Does it reach this range?

@Fast_Lane_RC

3 ай бұрын

Hello and thank for chiming in. Where did you read that? They say 120m if i remember conrrectly, but its not that much maybe close to 100m, but i can say its enough because the rc is not that big. I soon will do a mod to upgrage this range, stay tuned to my channel if thats something you're interested in. Hope this helps, thanks for watching. Ricardo

@Thyx_

3 ай бұрын

@@Fast_Lane_RCOk, thanks a lot for the reply.

@Fast_Lane_RC

3 ай бұрын

@@Thyx_ you re welcome if you havy any doubt just put here in the comments i will try and help you.

hi, please, could yo send me the oil shock link? Thanks

@Fast_Lane_RC

21 күн бұрын

Hello Filipe and thanks for the support, there you go my friend: s.click.aliexpress.com/e/_EwTBt03 If you need anything else feel free to ask. Thanks for watching

@Fast_Lane_RC

19 күн бұрын

@cadpires Filipe can i ask where are you from?

@cadpires

19 күн бұрын

Brazil 🇧🇷

@Fast_Lane_RC

19 күн бұрын

@@cadpires curioso tens o mesmo nome de familia que eu, tb sou Pires da parte do meu Pai, só por curiosidade, abraço amigo e obrigado pelo comentário. P.S: Eu Sou Português

@cadpires

19 күн бұрын

Que grande coincidência! Abraços fraternos aqui do Brasil 🇧🇷

Can you send links please 🥰🥹

@rahmankeskin4024

3 ай бұрын

I want to change my shocks Maybe later tyres to

@Fast_Lane_RC

3 ай бұрын

​​Hello​@@rahmankeskin4024 welcome to my channel there you have the link for the shocks: a.aliexpress.com/_EyWMYrf Anything else i can help you with?

Hello is there for SG116 MAX a metal spare part nr 6018 for the steering? It broke and now lam trying to fix it with glue.

@Fast_Lane_RC

2 ай бұрын

@bennolindeboom8117 Helllo my friend, so your problem is on the steering, the solution is to buy metal links, but until it arrives i have a solution for you. I have explain in it in a video already, but basically you use the link that is connected to the servo arm, you cut it in half, put a screw through one part and then you cut the screw head so you can thread o the other half. The steering link you glue it like you normally do cause in the servo it doesnt break cause it uses less force. Do you understand the process? Link for the metal links i use: s.click.aliexpress.com/e/_EJSgxzD The important part is when you install them try to make em the same size has the original put em side by side. This os the video explaining it, at 6:30 aproximately i talk about that repair, go check it out, kzread.info/dash/bejne/pIuDo8unf5DgltI.htmlsi=vNg7ZMTeXDAM9tbV

@bennolindeboom8117

2 ай бұрын

Thank you for your answer. You helped me alot

@Fast_Lane_RC

2 ай бұрын

@@bennolindeboom8117 glad to know i helped thats the all point, peace my friend.