First ride after painting and finishing rc car. I thanks to my friend Želimir Begović to help with rc car :)
Жүктеу.....
Пікірлер: 449
@gilesnewman98452 жыл бұрын
Excellent build! I really admire your design and the quality of the fabrication.
@brandonsmisek6 жыл бұрын
I will admit it does look a bit cab forward but a lot of futuristic vehicles do as well. The workmanship on this is amazing. Very well done Sir.
@mailmanx695 жыл бұрын
I LOVE large scale RC cars! That is a really nice piece of custom fabrication. Excellent first run! I can see that this car has a lot of potential. Given time, you can get all of that potential out of it.
@RICHIE_RICH8910 жыл бұрын
Alot better than most home made rc cars
@lyomon99816 жыл бұрын
the sound blew me away ... jaw droppin
@rep116618 жыл бұрын
Looks like you assembled from a kit clean and professional hats off!!
@TV-gq5dd7 жыл бұрын
вот это дело уровень уже хоть какоето совершенство получили всё надёжно, мощно, капитально и ломаться не будет, как пластиковые модели 1\5 молодцы!!!
@staysleepn9 жыл бұрын
That truck is awesome . Just needs some LED's and a spoiler and it would be awesome. Nice truck.
@cotoje016 жыл бұрын
Svaka Cast Ante Legendo, skonto sam po Dialektu da si sa nasih Krajeva, samo Napred, Zivio
@robertlizardi95447 жыл бұрын
By the looks of it it looks like a quad without a seat, body panels, and handlebars
@kevslife
7 жыл бұрын
Robert Lizardi its exactly that but with go-kart wheels and rc gear
@stuwest3653
6 жыл бұрын
IT'S COMPLETELY CUSTOM.
@steakandchips9046
6 жыл бұрын
Stu West NO idiot ! 🙄
@dmanalang90378 жыл бұрын
Its beautiful, nice work!
@barirwin85596 жыл бұрын
very nice work, lads. cool idea to use the servo for two jobs,brakes and accelerate
@Dr.Stein995 жыл бұрын
That is nice and quiet. I would get 10-15 minutes play time before the cops show up to hand me a stack of tickets.
@carloscastrojr64107 жыл бұрын
Dude...That is BADASS!! Was just looking at those little 4 wheelers for my friends little girl.EXCELLENT job with the steering!!!
@thebeastfromthesoutheast77657 жыл бұрын
that's a sick rc car bro. Looks indestructible
@Dlive20056 жыл бұрын
That shocks is crazy man wow looks like a 2500dollar build nice car
@AlansRC_World10 жыл бұрын
Wow, that looks awesome!! How long did it take you to build that 1/6th scale RC Car? That motor sounds sick!! Have you done a speed test on that yet??
@streetrc44998 жыл бұрын
Very cool, good job! ... Can you give it a longer gear ratio? Or maybe fit a working gearbox? ☺
@rc18trocks
6 жыл бұрын
scott mann when he went over and clicked the thing down after reving it. He actually put the transmission into first gear. It has four. Don't know why he used first only. This motor is very common in Chinese pit bikes
@nicov.2151
6 жыл бұрын
yeah he could used a 20kg rc servo on a third channel to manually switch the gear. Or he could switch it into third gear, and drive around with that. However the extra servo option is better..:-)
@silverstake885 жыл бұрын
Fabulous work! 👍👍😁👍👍
@wildgoobsid56 жыл бұрын
Nice piece of RC engineering. Cool project and you have the absolute coolest accent on KZread. Good job and nice video.
@W3BZSL1NG3R6 жыл бұрын
what would also be really cool is add the quad plastics back on it and get a lil doll or mini rider with racing suit and Helmet.. cya W3BZ
@rickyracer87176 жыл бұрын
Neat work, but what always surprises me with these builds is that nobody every builds in a differential! That solid rear axle does nothing to stop the vehicle from spinning out all the time!
@mygt8a4re6 жыл бұрын
Put on a seat, foot pegs, some oh sh!t grab handles and hop on it, lol. Really cool build!
@whyfpv7735 жыл бұрын
Best music!👌🔊💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💕💕💕💕💕💕💕💕💞💞💞💞💞💞
@cnnlt2006 жыл бұрын
Very nice job. Respect for the engeneering
@modelleg8 жыл бұрын
Looks like the thing understeers a bit...very cool!
@Reburned326 жыл бұрын
Looks good quality build.
@pauls57456 жыл бұрын
sweet! very clean build
@marsbase37295 жыл бұрын
awesome build!
@pozdrofrompoland10 жыл бұрын
very nice one, it's look very solid and elaborated...
@vancemacd63156 жыл бұрын
I'm quite impressed fellas. Nice work
@pauljs759 жыл бұрын
Nice build. At that scale it should have an FPV cam.
@mickg51967 жыл бұрын
The Sound is very nice👍👍👍
@fishnhunt21876 жыл бұрын
Little bit bigger and u could give ur friends rides...!!!! good job much love from Seattle WA!!
@2vgod4607 жыл бұрын
Very smart lads you are but how are u going to use the rest of the gears on the motorcycle engine?
@boganindustries9 жыл бұрын
Nice work!
@mattmilton37 жыл бұрын
Super cool and clean! Good job on the build 👌🏿
@RcNickster7098 жыл бұрын
Awesome guys!!! Man that thing is killer. Great job. Big thumbs up from me and subbed to stay tuned in.. :)
@filipgd1236 жыл бұрын
Looks great !
@scarface-396 жыл бұрын
Cool machine!!!!
@PetrincicBrosRC6 жыл бұрын
The sound is just great. Great. Oh yeah... Thanks for sharing and greetings from Slovenia, Pilot Robert
@ugniusbl.64676 жыл бұрын
Very cool, very good job👍
@nashanya42626 жыл бұрын
Sounds like a dirt bike ☺️🤤✌️
@whyfpv7735 жыл бұрын
BEAUTIFUL👍
@darioblaca6 жыл бұрын
svaka cast profesore
@SuperKisses28 жыл бұрын
now that's sounds perfect
@1minibean9 жыл бұрын
Sweet job. Looks great
@Itsahardknocklife96903 жыл бұрын
That is awesome 😎 well done
@DoRC8 жыл бұрын
This is very well put together! One question: why the complicated custom steering drive instead of just using a big servo?
@ubbe10896 жыл бұрын
Awesome vids I love that sound. Thanks
@jmadd900010 жыл бұрын
wiper motor for a steering servo! you are a genius! love the video
@carlgar20076 жыл бұрын
That's awesome . great job guys. Love it
@Voltaic6 жыл бұрын
Nice Project! I also do have a tipp for you how to not have the front wheels slide in corners.. the attachment points from the steering rods at the wheels have to be in an triange with the middle of the back axis and the 2 turning axis of the front wheels(the vertical ones)! Then the inner wheel turns more then the outer since the inner turning cycle is a smaller then the outer turning cycle!
@Voltaic
6 жыл бұрын
better said: they need to be on the line betwheen the middle axis point and the front steering axis:)
@bitemykrank19706 жыл бұрын
I don't understand the first 2:30, I can only speak English, my bad, but when it runs....it sounds great, and I want that muffler ( or lack of ) on my 30cc Yak, that backfire on overrun is AWESOME.....I LOVE IT !!! It does look like it's got TOO MUCH power though, it ground loops very quickly, maybe on big chunky tires and loose sand or dirt, it might be OK, but still a handful..........of fun
@jhml2011ut6 жыл бұрын
Brilliant!
@JessVideoDude6 жыл бұрын
Great job guys :-)
@CyrusNazarian6 жыл бұрын
Clamp a small bucket seat onto it and take your niece/nephew for a ride = ultimate uncle status!
@DoRC8 жыл бұрын
It would be awesome to see a third channel setup that could operate the shifter!
@thondupandrugtsang7 жыл бұрын
Wow! That is one awesome RC car.
@chrismechanic20009 жыл бұрын
nice work guys, awesome
@wooty87216 жыл бұрын
its cool and i appreciate the effort gone into building something like that, but i wouldn't ever want one personally.
@daveatkinson47746 жыл бұрын
Just needs a seat :) Awesome work!
@JohnSmith-ws6jg6 жыл бұрын
It sounds so cool!!
@PerryCodes7 жыл бұрын
Very cool!
@zackb60456 жыл бұрын
Next engineering mod is the shifting mechanism lol
@W3BZSL1NG3R6 жыл бұрын
you need a 4 channel airplane radio and use and fill an air canister and add a motorcycle quick air shifter and with a transmitter you can also add remote start we made chevy blazer into a remote control car. we used the power Windows motor and track for the gas & brakes and steering with same window motor an track but added a pully system for it. was tons of fun.. so you can either use a power Window motor n track or power lock solenoid to be able to shift it on the go. also it looks like it could use some more weight. my 114mph Traxxas rustler I added 2 1/2 lbs to the front bumper cause it would flip over soooo easy well hope this helps and keep up the great work as always Keep RCING CYA, W3BZ
@stpbasss3773
6 жыл бұрын
webslingercj rc expert
@nunodias33318 жыл бұрын
awsome work dude
@xibidit2 жыл бұрын
cvt motor and muffler!!! so cool man
@OneCleans1310 жыл бұрын
that backfire is great!
@Linktw06 жыл бұрын
this is so many levels of awesome
@DiamondBackDivision6 жыл бұрын
Nice build! I’d love to know more about your wiper motor steering conversion.
@offroadrc1106 жыл бұрын
Wow! Nice work! Subbed.
@thiagocruzy6 жыл бұрын
this is soooo sick!! woot
@P8FPV6 жыл бұрын
😁 very cool lads ✌👊
@user-mg7xx2hk7j7 жыл бұрын
I like it!
@markking57828 жыл бұрын
looks like its made from a pocket bike -- nice job
@RCGoodYearDA6 жыл бұрын
Cool ! :-)
@smcfadden19926 жыл бұрын
First person camera and a long range antenna would be super cool
@Benswan18710 жыл бұрын
She's a beauty
@miguelcolon39668 жыл бұрын
It looks like it's backwards.
@Navaja09
7 жыл бұрын
Miguel Colon how wtf?
@adelmehdi6174
6 жыл бұрын
no its manuel transmission so its just the 1se gear
@tyler-uw4yk
6 жыл бұрын
I was thinking the same thing the roll cage should be in the back
@stpbasss3773
6 жыл бұрын
Sebastian Nava the body looks like it's on backwards idiot
@omotolaoyeniyi631
6 жыл бұрын
Looks more like a small truck
@SamTheRider5 жыл бұрын
wow incredible very nice bro
@Vodoi9x10 жыл бұрын
Can't you tell me about your tire you used for this one ?. And what servo you used. Thanks
@maxmorgan22977 жыл бұрын
very good job:) would love to see it offroad with bigger wheels. and maybe other gearing:)
@collinallen53568 жыл бұрын
need to add shifting mechanism. how much does something like that cost or would you sell for?
@robhuckell367710 жыл бұрын
And really cool rc
@G.M..7 жыл бұрын
Good job !
@richardkimbrell86535 жыл бұрын
Nice!! 😎👍
@matthiasfrioux54838 жыл бұрын
Good job!!!!!
@P0RNEX9 жыл бұрын
great sound :)
@fctryoffetsh396 жыл бұрын
Man nice work
@hmygrowing96986 жыл бұрын
Beautiful
@megadeth19526 жыл бұрын
Does it turn left as good as right. Its looked like left turn was wide
@davidg43136 жыл бұрын
best rc ive ever seen
@ezziddeanjamal_73105 жыл бұрын
That was amazing work
@contactjunzzz7 жыл бұрын
omg so awesome dude
@TheRealKalEll6 жыл бұрын
NICE!!! 🐴🍻
@StupidFastRC7 жыл бұрын
That's awesome!
@jforu338 жыл бұрын
Bad Ass guys!! Just lower fuel tank so it will survive a roll over. You'll have a winner.
@Xplofreak
8 жыл бұрын
You can not lower the fuel tank. When you do this, the carb will not get any fuel.
@jforu33
8 жыл бұрын
I assume it has a gravity fed carb. I was just more concerned about a possible/very likely roll over that it would destroy the fuel cap. Then ending the fun for the day. Just as long as the tank was at carb height is all that is needed.
@gingermanc6 жыл бұрын
Looks brilliant btw :)
@reecenamina6 жыл бұрын
Does your radio have a trim for the steering servo?
Пікірлер: 449
Excellent build! I really admire your design and the quality of the fabrication.
I will admit it does look a bit cab forward but a lot of futuristic vehicles do as well. The workmanship on this is amazing. Very well done Sir.
I LOVE large scale RC cars! That is a really nice piece of custom fabrication. Excellent first run! I can see that this car has a lot of potential. Given time, you can get all of that potential out of it.
Alot better than most home made rc cars
the sound blew me away ... jaw droppin
Looks like you assembled from a kit clean and professional hats off!!
вот это дело уровень уже хоть какоето совершенство получили всё надёжно, мощно, капитально и ломаться не будет, как пластиковые модели 1\5 молодцы!!!
That truck is awesome . Just needs some LED's and a spoiler and it would be awesome. Nice truck.
Svaka Cast Ante Legendo, skonto sam po Dialektu da si sa nasih Krajeva, samo Napred, Zivio
By the looks of it it looks like a quad without a seat, body panels, and handlebars
@kevslife
7 жыл бұрын
Robert Lizardi its exactly that but with go-kart wheels and rc gear
@stuwest3653
6 жыл бұрын
IT'S COMPLETELY CUSTOM.
@steakandchips9046
6 жыл бұрын
Stu West NO idiot ! 🙄
Its beautiful, nice work!
very nice work, lads. cool idea to use the servo for two jobs,brakes and accelerate
That is nice and quiet. I would get 10-15 minutes play time before the cops show up to hand me a stack of tickets.
Dude...That is BADASS!! Was just looking at those little 4 wheelers for my friends little girl.EXCELLENT job with the steering!!!
that's a sick rc car bro. Looks indestructible
That shocks is crazy man wow looks like a 2500dollar build nice car
Wow, that looks awesome!! How long did it take you to build that 1/6th scale RC Car? That motor sounds sick!! Have you done a speed test on that yet??
Very cool, good job! ... Can you give it a longer gear ratio? Or maybe fit a working gearbox? ☺
@rc18trocks
6 жыл бұрын
scott mann when he went over and clicked the thing down after reving it. He actually put the transmission into first gear. It has four. Don't know why he used first only. This motor is very common in Chinese pit bikes
@nicov.2151
6 жыл бұрын
yeah he could used a 20kg rc servo on a third channel to manually switch the gear. Or he could switch it into third gear, and drive around with that. However the extra servo option is better..:-)
Fabulous work! 👍👍😁👍👍
Nice piece of RC engineering. Cool project and you have the absolute coolest accent on KZread. Good job and nice video.
what would also be really cool is add the quad plastics back on it and get a lil doll or mini rider with racing suit and Helmet.. cya W3BZ
Neat work, but what always surprises me with these builds is that nobody every builds in a differential! That solid rear axle does nothing to stop the vehicle from spinning out all the time!
Put on a seat, foot pegs, some oh sh!t grab handles and hop on it, lol. Really cool build!
Best music!👌🔊💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💕💕💕💕💕💕💕💕💞💞💞💞💞💞
Very nice job. Respect for the engeneering
Looks like the thing understeers a bit...very cool!
Looks good quality build.
sweet! very clean build
awesome build!
very nice one, it's look very solid and elaborated...
I'm quite impressed fellas. Nice work
Nice build. At that scale it should have an FPV cam.
The Sound is very nice👍👍👍
Little bit bigger and u could give ur friends rides...!!!! good job much love from Seattle WA!!
Very smart lads you are but how are u going to use the rest of the gears on the motorcycle engine?
Nice work!
Super cool and clean! Good job on the build 👌🏿
Awesome guys!!! Man that thing is killer. Great job. Big thumbs up from me and subbed to stay tuned in.. :)
Looks great !
Cool machine!!!!
The sound is just great. Great. Oh yeah... Thanks for sharing and greetings from Slovenia, Pilot Robert
Very cool, very good job👍
Sounds like a dirt bike ☺️🤤✌️
BEAUTIFUL👍
svaka cast profesore
now that's sounds perfect
Sweet job. Looks great
That is awesome 😎 well done
This is very well put together! One question: why the complicated custom steering drive instead of just using a big servo?
Awesome vids I love that sound. Thanks
wiper motor for a steering servo! you are a genius! love the video
That's awesome . great job guys. Love it
Nice Project! I also do have a tipp for you how to not have the front wheels slide in corners.. the attachment points from the steering rods at the wheels have to be in an triange with the middle of the back axis and the 2 turning axis of the front wheels(the vertical ones)! Then the inner wheel turns more then the outer since the inner turning cycle is a smaller then the outer turning cycle!
@Voltaic
6 жыл бұрын
better said: they need to be on the line betwheen the middle axis point and the front steering axis:)
I don't understand the first 2:30, I can only speak English, my bad, but when it runs....it sounds great, and I want that muffler ( or lack of ) on my 30cc Yak, that backfire on overrun is AWESOME.....I LOVE IT !!! It does look like it's got TOO MUCH power though, it ground loops very quickly, maybe on big chunky tires and loose sand or dirt, it might be OK, but still a handful..........of fun
Brilliant!
Great job guys :-)
Clamp a small bucket seat onto it and take your niece/nephew for a ride = ultimate uncle status!
It would be awesome to see a third channel setup that could operate the shifter!
Wow! That is one awesome RC car.
nice work guys, awesome
its cool and i appreciate the effort gone into building something like that, but i wouldn't ever want one personally.
Just needs a seat :) Awesome work!
It sounds so cool!!
Very cool!
Next engineering mod is the shifting mechanism lol
you need a 4 channel airplane radio and use and fill an air canister and add a motorcycle quick air shifter and with a transmitter you can also add remote start we made chevy blazer into a remote control car. we used the power Windows motor and track for the gas & brakes and steering with same window motor an track but added a pully system for it. was tons of fun.. so you can either use a power Window motor n track or power lock solenoid to be able to shift it on the go. also it looks like it could use some more weight. my 114mph Traxxas rustler I added 2 1/2 lbs to the front bumper cause it would flip over soooo easy well hope this helps and keep up the great work as always Keep RCING CYA, W3BZ
@stpbasss3773
6 жыл бұрын
webslingercj rc expert
awsome work dude
cvt motor and muffler!!! so cool man
that backfire is great!
this is so many levels of awesome
Nice build! I’d love to know more about your wiper motor steering conversion.
Wow! Nice work! Subbed.
this is soooo sick!! woot
😁 very cool lads ✌👊
I like it!
looks like its made from a pocket bike -- nice job
Cool ! :-)
First person camera and a long range antenna would be super cool
She's a beauty
It looks like it's backwards.
@Navaja09
7 жыл бұрын
Miguel Colon how wtf?
@adelmehdi6174
6 жыл бұрын
no its manuel transmission so its just the 1se gear
@tyler-uw4yk
6 жыл бұрын
I was thinking the same thing the roll cage should be in the back
@stpbasss3773
6 жыл бұрын
Sebastian Nava the body looks like it's on backwards idiot
@omotolaoyeniyi631
6 жыл бұрын
Looks more like a small truck
wow incredible very nice bro
Can't you tell me about your tire you used for this one ?. And what servo you used. Thanks
very good job:) would love to see it offroad with bigger wheels. and maybe other gearing:)
need to add shifting mechanism. how much does something like that cost or would you sell for?
And really cool rc
Good job !
Nice!! 😎👍
Good job!!!!!
great sound :)
Man nice work
Beautiful
Does it turn left as good as right. Its looked like left turn was wide
best rc ive ever seen
That was amazing work
omg so awesome dude
NICE!!! 🐴🍻
That's awesome!
Bad Ass guys!! Just lower fuel tank so it will survive a roll over. You'll have a winner.
@Xplofreak
8 жыл бұрын
You can not lower the fuel tank. When you do this, the carb will not get any fuel.
@jforu33
8 жыл бұрын
I assume it has a gravity fed carb. I was just more concerned about a possible/very likely roll over that it would destroy the fuel cap. Then ending the fun for the day. Just as long as the tank was at carb height is all that is needed.
Looks brilliant btw :)
Does your radio have a trim for the steering servo?